Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
UC2844NG
Onsemi
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
25 V
11 V
15 V
R-PDIP-T8
e3
9.78 mm
1
8
85 Cel
-25 Cel
1 A
PLASTIC/EPOXY
DIP
DIP8,.3
RECTANGULAR
IN-LINE
260
Not Qualified
4.45 mm
Switching Regulator or Controllers
NO
SINGLE
500 kHz
BIPOLAR
OTHER
TIN
THROUGH-HOLE
2.54 mm
DUAL
7.62 mm
NCP1550SN18T1G
NCP1550SN18T1G by Onsemi is a voltage-mode switching controller with 5 terminals, operating b/w -40 to 85 °C. It has a max output current of 0.1A and operates at a frequency of up to 690kHz. Ideal for industrial applications requiring precise pulse width modulation control in compact spaces.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
VOLTAGE-MODE
5.5 V
2.45 V
5 V
R-PDSO-G5
3 mm
5
-40 Cel
.1 A
TSSOP
TSOP5/6,.11,37
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
YES
690 kHz
INDUSTRIAL
GULL WING
.95 mm
1.5 mm
NCP1580DR2
NCP1580DR2 by Onsemi is a voltage-mode switching controller with a max switching frequency of 412 kHz. It operates in an industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring efficient power management. The small outline package style and push-pull switcher configuration make it ideal for compact designs.
13.2 V
4.5 V
12 V
R-PDSO-G8
e0
4.9 mm
SOP
SOP8,.25
SMALL OUTLINE
235
1.75 mm
PUSH-PULL
412 kHz
Tin/Lead (Sn/Pb)
1.27 mm
30
3.9 mm
NCP5318FTR2
NCP5318FTR2 by Onsemi is a 32-terminal switching controller with a max operating temperature of 70 °C. It operates on a nominal input voltage of 12V and has a max switching frequency of 1000 kHz. Ideal for applications requiring pulse width modulation control in commercial temperature grade environments.
ALSO OPERATES IN CURRENT MODE
CURRENT/VOLTAGE-MODE
8.5 V
R-PQFP-G32
7 mm
32
70 Cel
0 Cel
LQFP
QFP32,.35SQ,32
FLATPACK, LOW PROFILE
1.6 mm
PHASE-SHIFT
1000 kHz
COMMERCIAL
TIN LEAD
.8 mm
QUAD
MC34067DWR2G
MC34067DWR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w 0-70 °C, ideal for commercial applications. With a max output current of 1.5A and max switching frequency of 2200 kHz, it suits push-pull switcher configurations.
RESONANT CONTROL
18 V
10 V
R-PDSO-G16
10.3 mm
3
16
1.5 A
SOP16,.4
2.65 mm
2200 kHz
MATTE TIN
7.5 mm
NCP1530DM30R2G
NCP1530DM30R2G by Onsemi is a current-mode switching regulator with max output current of 0.6A and max switching frequency of 720kHz. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in electronics.
SWITCHING REGULATOR
3.3 V
4 V
S-PDSO-G8
.6 A
TSSOP8,.19
SQUARE
BUCK
720 kHz
.65 mm
NCP5220AMNR2
NCP5220AMNR2 by Onsemi is a 20-terminal switching controller with 2 functions. It operates b/w 0-70 °C, ideal for commercial applications. With a max output current of 2A and a switching frequency of 566kHz, it uses pulse width modulation in push-pull configuration.
R-XDSO-N20
6 mm
2
20
2 A
UNSPECIFIED
HVSON
SOLCC20,.2,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
566 kHz
NO LEAD
.5 mm
5 mm
NCP1423DMR2
NCP1423DMR2 by Onsemi is a VOLTAGE-MODE switching regulator with 1.2A output current, operating b/w -40 to 85 °C. Ideal for industrial applications, it features PULSE FREQUENCY MODULATION control technique and BOOST switcher configuration in a small outline package.
PULSE FREQUENCY MODULATION
.8 V
S-PDSO-G10
10
1.2 A
TSSOP10,.19,20
BOOST
600 kHz
NCP1575DG
NCP1575DG by Onsemi is a switching controller with max output current of 1.5A and max switching frequency of 320kHz. It operates in current/voltage-mode control technique, suitable for applications requiring efficient power conversion in compact spaces. The small outline package with gull wing terminals makes it ideal for surface mount designs.
20 V
9 V
320 kHz
NCP1601ADR2
NCP1601ADR2 by Onsemi is a VOLTAGE-MODE switcher with 15V supply, 0.75A output current, and 405kHz switching frequency. Ideal for automotive applications due to its small outline package and wide temperature range of -40 to 125 °C.
POWER FACTOR CONTROLLER
125 Cel
.75 A
15
5 mA
405 kHz
AUTOMOTIVE
NCP1601AP
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP1601BDR2
NCP1601BDR2 by Onsemi is a voltage-mode power factor controller with 15V nominal input/output voltage, 405 kHz max switching frequency, and 0.75A max output current. It is used in automotive applications for efficient power supply regulation in a small outline package.
NCP1601BP
NCP1601BP by Onsemi is a VOLTAGE-MODE switcher with 15V supply, 0.75A output current, and 405kHz switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and PLASTIC/EPOXY package style.
NCP1650DR2G
NCP1650DR2G by Onsemi is a current-mode switching regulator with 14V nominal voltage, operating b/w -40 to 125 °C. It features boost switcher config, PWM control technique at 250 kHz max frequency. Ideal for automotive applications due to its small outline package and high-temperature grade suitability.
10.5 V
14 V
9.9 mm
SOP16,.25
14
250 kHz
NCP1653P
NCP1653P by Onsemi is a current-mode switching regulator with 15V nominal voltage, 1.5A max output current, and 110kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and pulse width modulation control technique.
ALSO OPERATES IN PEAK CURRENT MODE
9.95 V
6 mA
110 kHz
UC2843ANG
30 V
8.2 V
UC3842ADR2G
UC3842ADR2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for applications requiring pulse width modulation control technique, it operates b/w 0-70 °C temperature range in commercial grade setups.
11.5 V
R-PDSO-G14
8.65 mm
SOP14,.25
NCP1547DG
NCP1547DG by Onsemi is a voltage-mode switching regulator with 3A output current, 374kHz max switching frequency, and 40V max input voltage. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and small outline package style.
IT CAN ALSO OPERATE WITH CURRENT MODE
40 V
150 Cel
3 A
374 kHz
NCP1547DR2G
NCP1547DR2G by Onsemi is a voltage-mode switching regulator with 3A output current, 374kHz max frequency, and -40 to 150 °C operating temp. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
NCP1200D40R2G
NCP1200D40R2G by Onsemi is a current-mode switching controller with 48 kHz max switching frequency and 0.25 A output current. It is a CMOS technology-based device in a small outline package, suitable for pulse width modulation control applications.
.25 A
48 kHz
CMOS
UC2845NG
UC2845NG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates b/w -25 to 85°C, ideal for regulating power in various applications like industrial automation and consumer electronics.
UC3845DR2G
UC3845DR2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for applications requiring pulse width modulation control technique, it operates b/w -40 to 125 °C temperature range.
NCP1203D100R2G
NCP1203D100R2G by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max output current of 0.25A and operates at a max frequency of 115kHz. Ideal for automotive applications due to its small outline package style and CMOS technology.
8.4 V
115 kHz
NCP1203D60R2G
NCP1203D60R2G by Onsemi is a switching controller with current-mode control technique. It operates in automotive temperature grade range from -40 to 125 °C, suitable for various applications. With a max output current of 0.25A and a switching frequency of 73kHz, it is ideal for compact designs requiring efficient power management.
73 kHz
NCP1203P60G
NCP1203P60G by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max output current of 0.25 A and operates at a max frequency of 73 kHz. Ideal for automotive applications due to its CMOS technology and single switcher configuration.
9.27 mm
5.33 mm
NCP1230D65R2G
NCP1230D65R2G by Onsemi is a current-mode switching controller with max output current of 0.5A and max input voltage of 18V, suitable for automotive applications. It operates at -40 to 125 °C, has a small outline package style, and uses pulse width modulation control technique.
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
13 V
.5 A
72 kHz
NCP5393AMNR2G
NCP5393AMNR2G by Onsemi is a 48-terminal switching controller with PWM control technique, operating at max 1000 kHz frequency. Ideal for buck switcher configuration, it has a nominal input voltage of 4.75-5.25 V and operates b/w 0-70°C. Suitable for various applications requiring efficient power regulation in compact spaces.
5.25 V
4.75 V
S-XQCC-N48
48
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
CS51411EDR8G
CS51411EDR8G by Onsemi is a switching regulator with 3A output current, PWM control technique, and 296kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85 °C with input voltage range of 4.5-40V.
CURRENT
296 kHz
CS51411GDR8G
CS51411GDR8G by Onsemi is a switching regulator with 3A output current, 296kHz max switching frequency, and PWM control technique. Ideal for applications requiring efficient voltage regulation in commercial temperature range from 0 to 70 °C.
CS51412ED8G
CS51412ED8G by Onsemi is a switching regulator with 3A output current, 296kHz max switching frequency, and PWM control technique. Ideal for industrial applications, it operates b/w -40 to 85 °C temperature range in a small outline package style.
CS51413EDR8G
CS51413EDR8G by Onsemi is a switching regulator with 3A output current, 594kHz max frequency, and PWM control technique. Ideal for industrial applications, it operates b/w -40 to 85 °C and supports input voltage range of 4.5-40V.
594 kHz
CS51413GDR8G
CS51413GDR8G by Onsemi is a switching regulator with 3A output current, 594kHz max switching frequency, and PWM control technique. Ideal for applications requiring efficient voltage regulation in compact spaces.
CS51414GDR8G
CS51414GDR8G by Onsemi is a switching regulator with 3A output current, 594kHz max frequency, and PWM control technique. Ideal for applications requiring efficient voltage regulation in compact spaces. Operates b/w 0-70 °C temperature range making it suitable for commercial-grade electronics.
NCP1239VDR2
NCP1239VDR2 by Onsemi is a current-mode switching controller with max output current of 0.8A and max switching frequency of 250kHz. It operates b/w -40 to 125 °C, suitable for various applications requiring efficient power regulation in compact spaces.
36 V
12.2 V
.8 A
SG3525ADWG
SG3525ADWG by Onsemi is a 16-terminal switching controller with PWM control mode, operating at 0-70°C. With a max output current of 0.5A and max switching frequency of 400kHz, it's ideal for push-pull switcher configurations in commercial-grade applications.
35 V
8 V
400 kHz
Tin (Sn)
40
NCP1216D65R2
NCP1216D65R2 by Onsemi is a current-mode switching controller with max output current of 0.5A and max switching frequency of 71.5kHz. It is used in applications requiring pulse width modulation control technique, such as small outline switching regulators & controllers for compact designs.
71.5 kHz
NCP1216AD65R2G
NCP1216AD65R2G by Onsemi is a switching controller with current-mode control technique. It operates at a max switching frequency of 71.5 kHz and can handle a max output current of 0.5 A. This small outline IC is ideal for applications requiring efficient power management in compact spaces.
NCP1216AP65G
NCP1216AP65G by Onsemi is a switching controller with current-mode control technique, operating at 71.5 kHz frequency and supporting up to 0.5 A output current. It has 7 terminals in an inline package style, ideal for applications requiring pulse width modulation in power management systems.
R-PDIP-T7
7
NCP1216D100R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30;
NCP1216D133R2G
NCP1216D133R2G by Onsemi is a current-mode switching controller with a max output current of 0.5A and a max switching frequency of 146kHz. This CMOS technology-based device is ideal for applications requiring pulse width modulation control technique in small outline packages.
146 kHz
NCP1216D65R2G
NCP1216D65R2G by Onsemi is a current-mode switching controller with max output current of 0.5A and max switching frequency of 71.5kHz. Ideal for applications requiring pulse width modulation control technique, it comes in a small outline package style suitable for surface mount technology.
NCP1216P65G
NCP1216P65G by Onsemi is a switching controller with current-mode control technique. It has a max output current of 0.5A and operates at a max switching frequency of 71.5kHz. Ideal for applications requiring efficient power management in compact spaces.
NCP1580DR2G
NCP1580DR2G by Onsemi is a voltage-mode switching controller with a max operating temperature of 85 °C and a min operating temperature of -40°C. It has a max switching frequency of 412 kHz, making it suitable for industrial applications requiring precise control over power delivery in compact spaces.
NCP5203MNR2G
NCP5203MNR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 700 kHz MAX SWITCHING FREQ. Ideal for applications requiring 0.4 A MAX OUTPUT CURRENT, such as small outline designs in commercial temperature grade environments. Package style: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE.
R-PDSO-N18
18
.4 A
SOLCC18,.2,20
700 kHz
NCP1308DR2G
NCP1308DR2G by Onsemi is a switching controller with current-mode control technique. It operates at a max switching frequency of 60 kHz and supports a max output current of 0.5 A. This CMOS technology-based device is ideal for applications requiring efficient power management in compact spaces.
60 kHz
NCP1377D1R2G
NCP1377D1R2G by Onsemi is a switching controller with max output current of 0.5A and max switching frequency of 300kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C, featuring a small outline package style for surface mount assembly.
ALSO HAS RESONANT CONTROL TECHNIQUE
R-PDSO-G7
300 kHz
NCP1280DR2G
NCP1280DR2G by Onsemi is a switching controller with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.01A and supports a peak switching frequency of 320kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
16 V
7.5 V
.01 A
NCP1203D40R2G
NCP1203D40R2G by Onsemi is a current-mode switching controller with max output current of 0.25A and max switching frequency of 47kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C, with input voltage ranging from 8.4V to 11V.
47 kHz
© 2023 All rights reserved
