Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1216D65R2 by Onsemi is a current-mode switching controller with max output current of 0.5A and max switching frequency of 71.5kHz. It is used in applications requiring pulse width modulation control technique, such as small outline switching regulators & controllers for compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
ACDS - Activité Composants Distribution Service
Digiode
AZTECH Wire
$14.780
RC Electronics
A-Z Elektronik GmbH
Problanco Electronics
Perfect Parts
SupplyDigital Components
TANS Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Kulean Microsystems
Corphita
Vigor
Microchip USA
UHIMA Technologies
Corohmni
The use of plastic/epoxy material makes the product lightweight and durable, suitable for various applications.
Being surface mountable, this product is easy to install on circuit boards, saving space and reducing assembly time.
The rectangular shape of the package allows for efficient use of space on the circuit board.
Having 8 terminals provides flexibility in connecting the product to other components.
The small outline package style makes the product suitable for compact designs where space is limited.
Current-mode control offers better dynamic performance and improved stability compared to voltage-mode control.
Tin lead terminal finish provides good solderability and reliability in various operating conditions.
Dual terminal position allows for easier and more secure connection to the circuit board.
The low seated height of 1.75 mm enables the product to be used in slim and compact devices.
The narrow width of 3.9 mm makes the product suitable for applications where space is limited.
The switching controller IC type offers efficient power conversion and regulation for improved performance.
The nominal input voltage of 11 V makes the product compatible with a wide range of input power sources.
With a peak reflow temperature of 235 °C, the product can withstand soldering processes without damage.
The compact length of 4.9 mm helps in optimizing board space and enables the product to be used in small devices.
A high maximum switching frequency of 71.5 kHz allows for efficient power conversion and regulation in the product.
The maximum output current of 0.5 A enables the product to deliver sufficient power for various applications.
CMOS technology offers low power consumption and high noise immunity, making the product energy-efficient and reliable.
The gull wing terminal form provides mechanical strength and reliability in connecting the product to the circuit board.
Pulse width modulation control technique helps in achieving precise regulation of output voltage for optimal performance.
The single switcher configuration simplifies the design and operation of the product, enhancing its reliability.
The tight terminal pitch of 1.27 mm allows for high-density mounting of the product on the circuit board.
With a moisture sensitivity level of 3, the product can withstand standard environmental conditions during manufacturing and operation.
The minimum input voltage of 11 V ensures reliable operation even when the input power source fluctuates within a certain range.
Switching Regulators & Controllers NCP1216D65R2 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NCP1216D65R2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 03/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Semicoa
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
TPS62740DSSR
Texas Instruments
TPS62740DSSR by Texas Instruments is a switching regulator with 12 terminals, operating b/w -40 to 85°C. It offers output voltage range of 1.8-3.3V and current up to 0.3A, suitable for industrial applications requiring efficient power management in compact spaces.
TPS54140DGQ
TPS54140DGQ by Texas Instruments is a switching regulator with 1.5A output current, 2500kHz max switching frequency, and -40 to 150°C operating temp range. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 3.5V to 42V.
LMZ14201TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Control Mode: VOLTAGE-MODE;
LM5002MAX/NOPB
LM5002MAX/NOPB by Texas Instruments is a current-mode switching regulator with a max output voltage of 75V and max output current of 0.6A. It operates in pulse width modulation control mode, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
AP64501SP-13
Diodes Incorporated
AP64501SP-13 by Diodes Inc. is a switching regulator with max output voltage of 40V, min input voltage of 3.8V, and max operating temp of 85°C. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package style.
LM2678S-3.3/NOPB
LM2678S-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 5A, operating temp range of -40 to 125°C, and control mode as voltage-mode. It is ideal for automotive applications due to its compact size, PWM control technique, and wide input voltage range from 8V to 40V.
TL494IDR
TL494IDR by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85°C. It features a nominal output voltage of 5V, PWM control technique, and push-pull switcher config. Ideal for industrial applications requiring precise regulation in compact designs up to 300 kHz frequency.
LMR33630ADDAR
LMR33630ADDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 34V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. This buck switcher operates at a max frequency of 2100kHz, making it suitable for various power management needs in automotive systems.
TPS560430YFDBVR
TPS560430YFDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and max output voltage of 24V, ideal for automotive applications. It operates b/w -40 to 125°C, supports a wide input voltage range from 4-36V, and uses pulse width modulation control technique.
TPS61023DRLR
TPS61023DRLR by Texas Instruments is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and PWM control mode. It has a boost switcher config., max output voltage of 5.5V, and is ideal for automotive applications due to its small size and high switching frequency up to 1MHz.
LM5146RGYR
LM5146RGYR by Texas Instruments is a switching controller with a max output voltage of 60V and max output current of 20A. Operating in voltage-mode control technique, it has a wide input voltage range from 5.5V to 100V, making it suitable for automotive applications requiring high power efficiency. With a compact chip carrier package style and very thin profile, this regulator is ideal for space-constrained designs in automotive electronics.
MC34167TG
MC34167TG by Onsemi is a 5-terminal switching regulator with max output current of 8A and max input voltage of 40V. It operates in voltage-mode control technique, suitable for buck-boost applications at temperatures ranging from 0 to 70°C.
TPS54361DPRR
TPS54361DPRR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max output voltage of 59V, suitable for industrial applications. It operates in current-mode control with a pulse width modulation technique, offering a wide input voltage range from 4.5V to 60V and a compact package style ideal for space-constrained designs.
LMZ10501SILT
LMZ10501SILT by Texas Instruments is a switching regulator with 1A output current, 3.6V max output voltage, and 2250kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LM2671M-5.0/NOPB
LM2671M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40 to 125°C, has a buck switcher configuration, and supports pulse width modulation control technique up to 400kHz frequency.
TPS5430DDARG4
TPS5430DDARG4 by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and VOLTAGE-MODE control mode. Package style: SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE.
LM2671M-ADJ/NOPB
LM2671M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the temperature range of -40 to 125°C, making it suitable for automotive applications. This small outline package has 8 terminals and uses pulse width modulation control technique at a max switching frequency of 400kHz.
NCP3063BMNTXG
NCP3063BMNTXG by Onsemi is a current-mode switching regulator with 1.5A output, operating from -40 to 125°C. Ideal for automotive applications, it supports input voltage range of 5-40V and offers hysteric control at 190kHz frequency in a small outline package.
LMR62014XMF/NOPB
LMR62014XMF/NOPB by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 125°C and supports input voltage range of 2.7-14V, output voltage from 3-20V, and has a max switching frequency of 1600 kHz. Ideal for automotive applications due to its compact size and current-mode control technique.
LM3578AMX/NOPB
LM3578AMX/NOPB by Texas Instruments is a switching regulator with 0-1V output voltage range, 2-40V input voltage range, and 100kHz max switching frequency. Ideal for applications requiring current-mode control technique in small outline packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
NCP1521BSNT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1406SNT1G
NCP1406SNT1G by Onsemi is a switching regulator with current-mode control, operating b/w -40 to 85°C. It has a boost configuration, supporting input voltages from 1.4V to 5.5V and output currents up to 25mA. Ideal for industrial applications requiring high-frequency pulse modulation in a compact SOT-23 package.
NCP1597AMNTWG
NCP1597AMNTWG by Onsemi is a current-mode switching regulator with a max operating temp of 85°C and freq of 1130 kHz. Its small outline package makes it ideal for industrial applications requiring high efficiency power management in compact spaces. With surface mount capability and dual terminals, it offers reliable performance in harsh environments.
NCP1593BMNTWG
NCP1593BMNTWG by Onsemi is a current-mode switching regulator with a max output current of 5.5A and a max switching frequency of 1130kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCP1729SN35T1G
NCP1729SN35T1G by Onsemi is a small outline, thin profile switching regulator with a max output current of 0.025A and a max operating temperature of 85°C. Ideal for industrial applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
NCP1529MUTBG
NCP1529MUTBG by Onsemi is a current-mode switching regulator with max output current of 1A and max switching frequency of 2200 kHz. It operates in industrial temperature range, suitable for buck applications with input voltage ranging from 2.7V to 5.5V.
NCP1207ADR2G
NCP1207ADR2G by Onsemi is a switching controller with a max output current of 0.5A and a max switching frequency of 200kHz. It operates in automotive temperature grades and uses pulse width modulation control technique, making it ideal for automotive applications requiring efficient power management.
NCP1593AMNTWG
NCP1593AMNTWG by Onsemi is a current-mode switching regulator with max output current of 5.5A and max switching frequency of 1130kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports pulse width modulation control technique.
NCP1034DR2G
NCP1034DR2G by Onsemi is a switching controller with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures (-40 to 125 °C) and features hysteric current mode control technique. Ideal for applications requiring high efficiency and compact design, such as automotive electronics or industrial automation systems.
NCP1397ADR2G
SWITCHING CONTROLLER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 20 V;
NCP1395BDR2G
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
NCP1532MUAATXG
NCP1532MUAATXG by Onsemi is a dual switching controller with a max output current of 0.6A and a max switching frequency of 2700 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise current-mode control. The small outline package with a very thin profile and surface mount capability makes it ideal for space-constrained designs.
NCP1529ASNT1G
NCP1529ASNT1G by Onsemi is a current-mode switching regulator with 1A output, 2200kHz max frequency, and 3.6V nominal input voltage. Ideal for industrial applications requiring efficient power management in compact spaces. Features small outline package with dual terminals and pulse width modulation control technique.
NCP1397BDR2G
NCP1397BDR2G by Onsemi is a switching controller with 1A output current and 560kHz max switching frequency. It operates on 10.3-20V input voltage range, ideal for resonant control applications in compact designs. The small outline package with gull wing terminals makes it suitable for surface mount PCBs.
NCP1252ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
NCP1200D60R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCP1423DMR2G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NCP1597BMNTWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved