Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.
Add filters
All
Selected
MAX4693EGE-T
Maxim Integrated
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
SPDT
S-PQCC-N16
e0
4 mm
1
-5.5 V
-4.5 V
-5 V
3
16
82 dB
2 ohm
25 ohm
85 Cel
-40 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
HVQCCN
LCC16,.16SQ,25
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
245
3/5/+-5
Not Qualified
.9 mm
Multiplexer or Switches
5.5 V
4.5 V
5 V
YES
50 ns
80 ns
BREAK-BEFORE-MAKE
CMOS
INDUSTRIAL
TIN LEAD
NO LEAD
.65 mm
QUAD
MAX4700CAE-T
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SPST
R-PDSO-G16
6.2 mm
-20 V
-15 V
NO/NC
2
53 dB
.09 ohm
1.25 ohm
70 Cel
0 Cel
SSOP
SSOP16,.3
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
12/+-15
1.99 mm
20 V
15 V
300 ns
400 ns
COMMERCIAL
GULL WING
DUAL
5.29 mm
MAX4700EAE-T
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4733EUA-T
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
S-PDSO-G8
3 mm
8
72 dB
.8 ohm
50 ohm
TSSOP
TSSOP8,.19
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
3/5
1.1 mm
11 V
2 V
3 V
60 ns
150 ns
MAX4736EGC-T
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
S-CQCC-N12
12
52 dB
CERAMIC, METAL-SEALED COFIRED
VQCCN
LCC12,.12SQ,20
CHIP CARRIER, VERY THIN PROFILE
1.8/3
1 mm
3.6 V
1.6 V
1.8 V
25 ns
30 ns
.5 mm
MAX9392EHJ-T
CROSS POINT SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: TFQFP; Package Shape: SQUARE; Surface Mount: YES;
CROSS POINT SWITCH
S-PQFP-G32
5 mm
32
TFQFP
FLATPACK, THIN PROFILE, FINE PITCH
1.2 mm
3.3 V
.555 ns
.574 ns
BIPOLAR
MC14016BCPG
Onsemi
MC14016BCPG by Onsemi is a 4-function multiplexer with 14 terminals, operating at -55 to 125°C. It has a nominal voltage of 5V and max on-state resistance of 660 ohm. Ideal for military-grade applications requiring CMOS technology in an inline package style.
R-PDIP-T14
e3
18.86 mm
NO
4
14
15 ohm
660 ohm
125 Cel
-55 Cel
DIP
DIP14,.3
IN-LINE
260
5/15
4.69 mm
18 V
90 ns
MILITARY
Tin (Sn)
THROUGH-HOLE
2.54 mm
40
7.62 mm
MC14052BCPG
MC14052BCPG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact IN-LINE package.
DIFFERENTIAL MULTIPLEXER
R-PDIP-T16
19.175 mm
50 dB
1050 ohm
DIP16,.3
4.44 mm
.025 A
600 ns
MC14053BCPG
MC14053BCPG by Onsemi is a CMOS multiplexer with 3 functions, 2 channels, and 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. Ideal for military-grade applications requiring high isolation and low on-state resistance.
SINGLE-ENDED MULTIPLEXER
550 ns
MC14066BCPG
MC14066BCPG by Onsemi is a CMOS SPST multiplexer with 4 functions, 14 terminals, and 5V nominal voltage. It operates in temperatures ranging from -55 to 125 °C and is suitable for military-grade applications requiring high isolation and low on-state resistance.
120 ns
MC74HC4053ANG
MC74HC4053ANG by Onsemi is a 16-terminal CMOS multiplexer with 3 functions. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. Ideal for military-grade applications due to its low on-state resistance of 80 ohm and fast switch-on time of 245 ns.
-6 V
0 V
12 ohm
80 ohm
2/6,GND/-6
.08 mA
6 V
160 ns
245 ns
MC74HC4066ANG
MC74HC4066ANG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY grade. Ideal for applications requiring separate output switching in electronic circuits.
40 dB
20 ohm
120 ohm
2/12
12 V
45 ns
MAKE-BEFORE-BREAK
MC74HC4316ANG
MC74HC4316ANG by Onsemi is a 4-function SPST multiplexer with 16 terminals. It operates b/w -55 to 125 °C, with Vsup ranging from 2V to 6V. Ideal for military-grade applications requiring CMOS technology and break-before-make switching.
130 ohm
Multiplexers or Switches
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
R-PDSO-G6
2 mm
6
93 dB
3 ohm
55 ohm
TSSOP6,.08
2.5/5
15 ns
Matte Tin (Sn) - annealed
1.25 mm
ADG211AKRZ-REEL
Analog Devices
ADG211AKRZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, -40 to 85 °C operating temp range, and 115 ohm max on-state resistance. It is ideal for industrial applications requiring separate outputs, with a compact small outline package and high off-state isolation of 80 dB.
9.9 mm
NC
80 dB
115 ohm
SOP
SOP16,.25
SMALL OUTLINE
5,+-15
1.75 mm
450 ns
MATTE TIN
1.27 mm
30
3.9 mm
ADG433BRZ
ADG433BRZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and a max on-state resistance of 24 ohm. It operates in industrial temperature range (-40 to 85 °C) and is suitable for applications requiring separate output switching at voltages ranging from -16.5V to +16.5V.
ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY
-16.5 V
-13.5 V
68 dB
.85 ohm
24 ohm
5,12/+-15
16.5 V
13.5 V
130 ns
165 ns
ADG452BRZ-REEL
ADG452BRZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 5V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and offers low on-state resistance (12 ohm). Ideal for applications requiring precise signal switching in compact designs.
ALSO OPERATE WITH 12V SINGLE SUPPLY
65 dB
.3 ohm
140 ns
220 ns
ADG701BRTZ-REEL
ADG701BRTZ-REEL by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring precise signal routing in compact spaces.
2.9 mm
55 dB
5 ohm
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
13 ns
20 ns
Matte Tin (Sn)
.95 mm
1.6 mm
ADG774ABRQZ-REEL
ADG774ABRQZ-REEL by Analog Devices is a CMOS multiplexer with 4 functions, 2 channels, and 16 terminals. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 6 ohm. Ideal for industrial applications requiring precise signal switching in compact designs.
ALSO OPERATES WITH 5V NOMINAL SUPPLY
4.9022 mm
.15 ohm
6 ohm
SSOP16,.25
1.7526 mm
.001 mA
2.7 V
8 ns
14 ns
.635 mm
3.9116 mm
ADG774ABRQZ
ADG774ABRQZ by Analog Devices is a CMOS multiplexer with 4 functions, 2 channels, and a max on-state resistance of 6 ohm. It operates at temperatures ranging from -40 to 85 °C and has a nominal voltage of 3 V. Ideal for industrial applications requiring precise signal switching in compact designs.
ADG781BCPZ
ADG781BCPZ by Analog Devices is a CMOS SPST switch with 4 functions, 10 ohm Ron, and 20 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a very thin profile for space-constrained applications. Suitable for multiplexing & switching tasks in various electronic systems.
CAN ALSO OPERATE AT 5V NOMINAL
S-XQCC-N20
20
58 dB
.1 ohm
10 ohm
UNSPECIFIED
LCC20,.16SQ,20
12 ns
ADG836LYRM-REEL7
ADG836LYRM-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 0.65 ohm Ron, and 67 dB isolation. Ideal for automotive applications due to its thin profile, small outline package and wide operating temperature range of -40 to 125 °C.
S-PDSO-G10
10
67 dB
.04 ohm
.65 ohm
TSSOP10,.19,20
240
3/3.3
1.65 V
7 ns
26 ns
AUTOMOTIVE
ADG836LYRM-REEL
ADG836LYRM-REEL by Analog Devices is a CMOS SPDT switch with 2 functions, 0.65 ohm Ron, and 26 ns switch-on time. Ideal for automotive applications due to its 67 dB isolation, -40 to 125 °C operating temp range, and small 3x3 mm package size.
Tin/Lead (Sn85Pb15)
ADG836LYRM
ADG836LYRM by Analog Devices is a CMOS SPDT switch with 2 functions, operating at -40 to 125 °C. It has a max on-state resistance of 0.65 ohm and switching time of 26 ns. Ideal for automotive applications due to its small outline, thin profile, and shrink pitch package style.
CD74HC4016PWR
Texas Instruments
CD74HC4016PWR by Texas Instruments is a CMOS SPST multiplexer with 4 functions, operating b/w -55 to 125 °C. It has a max on-state resistance of 320 ohm and switching time of 38 ns. Ideal for military-grade applications requiring high isolation and low on-state resistance in a compact package.
R-PDSO-G14
62 dB
320 ohm
TSSOP14,.25
NOT SPECIFIED
2/10
10 V
29 ns
38 ns
4.4 mm
ADG412BRU-REEL7
ADG412BRU-REEL7 by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and supports supply voltages of +/-15V. Ideal for industrial applications requiring high isolation and fast switching times.
35 ohm
TSSOP16,.25
145 ns
175 ns
ADG412BRU-REEL
ADG412BRU-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has separate outputs for Vsup ranging from -13.5V to +16.5V. Ideal for applications requiring high isolation (68 dB) and fast switching times (175 ns).
ADG412BRUZ-REEL
ADG412BRUZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and supports supply voltages of +/-15V. Ideal for industrial applications requiring high isolation and fast switching times.
ADG412BRUZ
ADG412BRUZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 35 ohm and switching voltage of ±15V. Ideal for industrial applications requiring high isolation (68 dB) and fast switching times (175 ns).
ADG701BRJ-500RL7
ADG701BRJ-500RL7 by Analog Devices is a SPST switch with 5 terminals, operating at 3V. It offers low on-state resistance of 5 ohm and fast switching times of 20ns on and 13ns off. Ideal for industrial applications requiring high isolation (55dB) in a compact package.
R-PDSO-G5
5
TSOP5/6,.11,37
ADG701BRJ-REEL7
ADG701BRJ-REEL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG701BRJ-REEL
ADG701BRJ-REEL by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG702BRJ-500RL7
ADG702BRJ-500RL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. With a max on-state resistance of 5 ohm and switching time of 20 ns, it's ideal for industrial applications requiring fast and efficient signal routing in compact spaces. The CMOS technology and low profile package make it suitable for high-performance multiplexing tasks.
ADG702BRJ-REEL7
ADG702BRJ-REEL7 by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching in compact designs.
ADG702BRJ-REEL
ADG702BRJ-REEL by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching behavior in a compact SMD package.
ISL43142IRZ-T
Intersil
ISL43142IRZ-T by Intersil is a 4-function SPST switch with a max on-state resistance of 65 ohm. Operating in industrial temperatures, it has a supply voltage range from -6V to +6V and fast switching times of 80ns turn-on and 30ns turn-off. Ideal for applications requiring precise signal routing in compact spaces.
-2 V
65 ohm
LCC16,.12SQ,20
3/12/+-5
DG406EUI
DG406EUI by Maxim Integrated is a CMOS single-ended multiplexer with 16 channels. It operates at a nominal voltage of +/-15V and has a max on-state resistance of 100 ohm. With a small outline package, it is ideal for industrial applications requiring precise signal switching in tight spaces.
R-PDSO-G28
9.7 mm
28
69 dB
1.5 ohm
100 ohm
TSSOP28,.25
.03 A
1 mA
200 ns
MC14067BCPG
MC14067BCPG by Onsemi is a CMOS single-ended multiplexer with 16 channels. It operates at a supply voltage range of 3-18V and offers a max on-state resistance of 1050 ohm. With MILITARY grade temperature tolerance, it is ideal for applications requiring precise signal routing in harsh environments.
R-PDIP-T24
31.75 mm
24
DIP24,.6
5.08 mm
.6 mA
625 ns
15.24 mm
MC14067BDWG
MC14067BDWG by Onsemi is a 24-terminal CMOS multiplexer with 16 channels. It operates at temperatures ranging from -55 to 125 °C and has a max supply voltage of 18 V. With a small outline package style, it is ideal for military-grade applications requiring high on-state resistance match and off-state isolation.
R-PDSO-G24
15.395 mm
SOP24,.4
2.65 mm
7.5 mm
NBSG72AMNG
NBSG72AMNG by Onsemi is a 16-terminal cross point switch with a supply voltage range of +-2.5/+-3.3V, suitable for industrial applications. Featuring a compact square package style and surface mount design, it operates b/w -40 to 85°C with terminal finish in nickel gold palladium for reliability. Ideal for multiplexers & switches requiring low-profile solutions.
NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V
S-XQCC-N16
+-2.5/+-3.3
3.465 V
2.375 V
2.5 V
NICKEL GOLD PALLADIUM
NLAS4599DFT2G
NLAS4599DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 40 ohm and nominal off-state isolation of 93 dB. Ideal for military-grade applications requiring fast switching times and low resistance.
40 ohm
2/5.5
NLAS4684MNR2G
NLAS4684MNR2G by Onsemi is a CMOS SPDT switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 1 ohm and nominal off-state isolation of 65 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
S-XDSO-N10
.06 ohm
1 ohm
HVSON
SOLCC10,.11,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
2/5
ADG904BRU-R-REEL7
ADG904BRU-R-REEL7 by Analog Devices is a CMOS multiplexer with 4 channels, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers off-state isolation of 37dB. This small outline switch is ideal for industrial applications requiring fast switching times of 10-16ns.
R-PDSO-G20
6.5 mm
37 dB
2.75 V
16 ns
10 ns
ADG904BRU-R-REEL
ADG904BRU-R-REEL by Analog Devices is a CMOS multiplexer with 4 channels, operating at -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers 37 dB isolation. Ideal for industrial applications requiring fast switching times (10 ns on, 16 ns off) in a compact package (6.5mm x 4.4mm).
ADG904BRU-R
ADG904BRU-R by Analog Devices is a CMOS multiplexer with 4 channels, operating b/w -40 to 85 °C. It has a supply voltage range of 1.65V to 2.75V and offers off-state isolation of 37 dB. Ideal for industrial applications requiring fast switching times (10-16 ns) in a compact package (6.5mm x 4.4mm).
DG411MY/PR
SPST; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AD8108ASTZ
AD8108ASTZ by Analog Devices is an 80-terminal cross point switch with a 5V supply voltage, -40 to 85°C operating temperature range, and 180ns max switch-on time. It is ideal for industrial applications requiring separate output channels, high off-state isolation of 93dB, and fast switching capabilities.
S-PQFP-G80
12 mm
80
LFQFP
QFP80,.55SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
180 ns
AD8110ASTZ
AD8110ASTZ by Analog Devices is an 80-terminal multiplexer with a 5V supply voltage, -5V power supplies, and separate outputs. It features a low profile flatpack package suitable for industrial applications like cross point switching. With a wide operating temperature range of -40 to 85°C, it offers high off-state isolation at 93dB.
+-5
© 2023 All rights reserved
