Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG702BRJ-REEL by Analog Devices is a SPST switch with 5 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 5 ohm and fast switching times of 20 ns turn-on and 13 ns turn-off. Ideal for industrial applications requiring high isolation (55 dB) and break-before-make switching behavior in a compact SMD package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Semicontronic
$6.500
$6.338
$6.305
One Stop Electronics
Parana Technologies
$10.602
$9.860
IDEA Electronic Components Group
$11.400
$10.830
AZTECH Wire
$17.056
DigiPath Technology Company
$17.784
$17.073
Native Components
$84.764
$81.373
Northwest PG Solutions
$93.240
Vigor
Corphita
Microchip USA
Plastic/Epoxy material provides durability and protects the internal components of the device from external factors, ensuring a longer lifespan.
Surface mount technology allows for easy and efficient assembly onto circuit boards, saving space and reducing manufacturing costs.
Operating at a nominal supply voltage of 3V makes it compatible with a wide range of electronic systems, enhancing versatility.
With a high maximum operating temperature of 85 °C, this product can withstand harsh environmental conditions and maintain reliable performance.
CMOS technology offers low power consumption and high noise immunity, making the device energy-efficient and reliable.
Multiplexers & Switches ADG702BRJ-REEL attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
ADG702BRJ-REEL Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 29/Jan/2014
PCN Assembly/Origin - Alt. Site 22/Feb/2016
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ROHM
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
CD74HCT4067MG4
CD74HCT4067MG4 by Texas Instruments is a 24-terminal CMOS multiplexer with a 5V supply voltage. It features a max on-state resistance of 270 ohm and operates in temperatures ranging from -55 to 125°C. Ideal for military-grade applications requiring high-speed signal switching with low power consumption.
DG406DYZ-T
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA2567UMX
FSA2567UMX by Onsemi is a 16-terminal multiplexer with a supply voltage range of 1.65V to 4.3V, offering separate outputs and low on-state resistance of 12 ohm. With a compact chip carrier package style and industrial temperature grade, it is ideal for applications requiring fast switching times and high isolation levels in electronic circuits.
ADG452BRZ-REEL
Analog Devices
ADG452BRZ-REEL by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and 5V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and offers low on-state resistance (12 ohm). Ideal for applications requiring precise signal switching in compact designs.
SN74LVC1G66DCKRE4
SN74LVC1G66DCKRE4 by Texas Instruments is a SPST switch with 5 terminals, operating at 2.3V to 5.5V. It offers a max on-state resistance of 20 ohm and fast switching times of 6.5 ns on and 6.9 ns off, suitable for industrial applications requiring low power consumption and high bandwidth up to 300 kHz.
SN74LVC1G3157DCKRG4
SN74LVC1G3157DCKRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at temperatures from -40 to 85°C. It has a max resistance of 50 ohm and supports power supplies of 1.8/5V. This CMOS technology-based switch is commonly used in industrial applications for signal multiplexing due to its compact size and low on-state resistance.
ADG621BRMZ-REEL
ADG621BRMZ-REEL by Analog Devices is a CMOS SPST switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 5.5 ohm and switching voltage of 5V, suitable for industrial applications requiring high isolation and fast switching times. The small outline package with dual terminals makes it ideal for space-constrained designs needing reliable signal routing.
CD4053BE
CD4053BE by Texas Instruments is a 3-channel CMOS multiplexer with 16 terminals. It operates at a supply voltage range of 3-20V and offers a max on-state resistance of 1050 ohm. Ideal for military-grade applications, it has a bandwidth of 30 kHz and features break-before-make switching for seamless performance.
ADG1206YCPZ-REEL7
ADG1206YCPZ-REEL7 by Analog Devices is a 32-terminal CMOS multiplexer with 16 channels. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 200 ohm. Ideal for automotive applications, this chip carrier switch offers a nominal voltage of +-15 V and very thin profile package style.
DG442DY
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A3166DBVRG4
TS5A3166DBVRG4 by Texas Instruments is a SPST switch with 3.4 ohm Ron, 19 ns switch-on time, and 64 dB isolation. Ideal for industrial applications requiring separate output switching at a bandwidth of 200 kHz. Compact design with low profile and shrink pitch package suitable for surface mount assembly.
ADG1414BCPZ-REEL7
ADG1414BCPZ-REEL7 by Analog Devices is an 8-function multiplexer & switch with a square package shape. It operates at a nominal voltage of 5V and has a max on-state resistance of 25 ohm. This IC is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
74LVC1G3157GW,125
NXP Semiconductors
NXP Semiconductors' 74LVC1G3157GW,125 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
ADG719BRMZ-REEL7
ADG719BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with 3V nominal voltage, 12 ohm max on-state resistance, and 67dB off-state isolation. Ideal for automotive applications due to its CMOS technology, -40 to 125°C operating range, and small outline package style.
DG412DYZ-T
Renesas Electronics
Renesas Electronics' DG412DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
HMC8038LP4CETR
Analog Devices' HMC8038LP4CETR is a 16-terminal SPDT multiplexer with a 3-5.4V supply range, operating from -40 to 105°C. Its square chip carrier package makes it ideal for industrial applications requiring precise signal switching in compact spaces.
TS5A23159DGSR
TS5A23159DGSR by Texas Instruments is a 2-channel SPDT switch with 1.8/5 V power supplies, 3.5 ohm Ron, and 105 kHz bandwidth. Ideal for industrial applications requiring separate outputs and high isolation levels. Package style: small outline, thin profile, shrink pitch; terminal finish: nickel palladium gold.
CD4066BM96G4
CD4066BM96G4 by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high bandwidth in compact designs.
CD4052BE
Rca Solid State
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BM
CD4066BM by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high signal current in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADG706BRUZ
ADG706BRUZ by Analog Devices is a 28-terminal SPST multiplexer with 16 channels. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switching time of 50 ns. Ideal for industrial applications requiring high-speed signal switching in compact designs.
ADG704BRMZ
ADG704BRMZ by Analog Devices is a CMOS multiplexer with 4 channels, 10 terminals, and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and has a common output. Ideal for applications requiring fast switching with low on-state resistance (8 ohm) and high off-state isolation (60 dB).
ADG704BRMZ-REEL7
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG719BRTZ-REEL7
ADG719BRTZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and switching voltage of 5.5 V, suitable for automotive applications due to its low profile design and high isolation level of 67 dB.
ADG733BRUZ
ADG733BRUZ by Analog Devices is a 3-function multiplexer and switch with a supply voltage range of 2.25V to 2.75V. It has a small outline, thin profile package style and can operate in industrial temperature conditions (-40°C to 85°C). This IC is commonly used for signal routing and switching applications.
ADG779BKSZ-REEL7
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG708BRUZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG704BRMZ-REEL
ADG704BRMZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V and offers a max on-state resistance of 8 ohm. With fast switching times of 24ns turn-on and 16ns turn-off, it is ideal for industrial applications requiring precise signal routing in compact spaces.
ADG706BRUZ-REEL7
ADG706BRUZ-REEL7 by Analog Devices is a CMOS SPST multiplexer with 16 channels. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switch-on time of 50 ns. Ideal for industrial applications requiring high isolation and low resistance switching in compact designs.
ADG719BRMZ
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG719BRTZ-500RL7
ADG719BRTZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at a voltage range of 1.8V to 5.5V. It offers low on-state resistance of 12 ohm and fast switching times of 15ns turn-on and 8ns turn-off, suitable for automotive applications requiring high-speed signal routing in compact spaces.
ADG706BRUZ-REEL
ADG706BRUZ-REEL by Analog Devices is a 16-channel SPST CMOS multiplexer with 4.5 ohm Ron and 0.3 ohm resistance match. It operates at -40 to 85 °C, with Vsup ranging from 2.25V to 2.75V, making it ideal for industrial applications requiring precise signal switching in compact designs.
ADG708BRUZ-REEL
ADG708BRUZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 125°C, with a max on-state resistance of 4.5 ohm and common output. Ideal for automotive applications due to its small size (5x4.4mm) and low supply current (0.001mA).
ADG709BRUZ
ADG709BRUZ by Analog Devices is a 16-terminal CMOS multiplexer with a max operating temperature of 125°C. It features a common output, differential multiplexer type, and small outline thin profile package style. Ideal for automotive applications due to its break-before-make switching and high off-state isolation of 60 dB.
ADG712BRUZ
ADG712BRUZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 8 ohm and switching voltage of 5.5V, suitable for industrial applications requiring high isolation and fast response times. The package is small outline with dual terminals, making it ideal for compact designs in various electronic systems.
ADG719BRTZ-REEL
ADG719BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a voltage range of 1.8V to 5.5V. It features a max on-state resistance of 12 ohm and offers high off-state isolation of 67 dB. Ideal for automotive applications due to its CMOS technology and compact design with low profile package style.
ADG712BRZ
ADG712BRZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at a supply voltage range of 1.8V to 5.5V. With a max on-state resistance of 8 ohm and fast switching times of 20ns turn-on and 12ns turn-off, it is ideal for industrial applications requiring precise signal routing in compact spaces.
ADG734BRUZ
ADG734BRUZ by Analog Devices is a CMOS SPDT switch with 4 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and switching voltage of 3/5/+-3 V, suitable for industrial applications requiring high isolation and fast switching times.
ADG719BRTZ-R2
ADG719BRTZ-R2 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and nominal off-state isolation of 67 dB. Ideal for automotive applications due to its low profile design and CMOS technology.
ADG708BRUZ-REEL7
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved