Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Multiplexers or Switches; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$3.550
Lifecycle Status
Suppliers In-Stock
57
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$3.340
1k+ parts
$3.020
10k+ parts
-
Freelance Electronics
$2.638
Digiode
$3.372
Component Electronics Inc.
$9.230
$6.920
$6.000
Nova Conductors
$10.075
American Microsemiconductor Inc.
$13.900
TEDSS.com
$14.900
Vyrian
Anansix
J & M Industries LLC
Fibra_Brandt Electronic GMBH
Halfin
ECAB
MISTER SPROCKETS
Prism Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Semtec, LLC
Huijzer Components
Q Components
Digital Electronic Gebert Verwaltungs UG
Vectronix, Inc
Electronic Expediters
Sinequanon
Cyclops Electronics Ltd
Odintec Ltd.
Lakeland Logistics Inc
Sunrise Surplus Inc.
Bristol Electronics
Manoshevitz Elec. Sales
Euro-Tech
Holdelec - ElecDif-Pro
Corel Iberica Componentes, S.L.
Mil-Aero Solutions, Inc.
R&J Components
A2Z Electronics, Inc.
M&R Communications
Sogenti Electronics
MRC Electronics
Pegasus Components GmbH
Mentor Electronics Marketing, LLC
ABC Electronics Ltd.
ComSIT Distribution GmbH
ComSIT USA
Speed Components Ltd
Manotoh
EMSNET
Florida Circuit
Semi Source
ACDS - Activité Composants Distribution Service
Connector Distribution Corp
Right Parts Inc.
Inventory MP
North Shore Components
PC Components Company LLC
Carlin Systems, Inc.
Elcom Components
Atlantic Semiconductor
Ampacity Inc.
Semicontronic
$2.944
$2.929
Corphita
$3.195
MARBEL Systems
$4.233
Texas Native Microelectronics
$4.866
$4.671
$4.525
$4.282
Kenton Components
$5.839
$5.138
Bastille Electronics
$10.070
$9.566
$8.962
Continental Prestige Electronics
$9.873
Qasali Group International
$13.138
$12.219
$11.562
Component Stockers USA
$13.950
$10.600
AZTECH Wire
$16.339
Aztec Data Supply Inc.
$22.326
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Authorized Procurement Solutions
Glotronic Ltd.
Argo Parts USA
Supply Digital
Netroflash
$9.571
$9.370
Assy Fe
Infinite Electronics LLP (Excess)
Metaverse IC Inc.
Kepictronics
A-Plus Industry Inc.
Perfect Parts
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Amble Industries
ChipTracer
Multiplexers & Switches DG508ACJ attributes and parameters. Explore more Multiplexers & Switches devices from Calogic
JESD-30 Code:
JESD-609 Code:
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
DG508ACJ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.90.00.00
SB
8542.39.00.00
NSN
5962-01-321-1335, 5962013211335, 5962-01-288-8811, 5962012888811, 5962-01-417-2641, 5962014172641
NIIN
013211335, 012888811, 014172641
Calogic, LLC, a privately held company, was formed in March 2001 to purchase certain assets of the former Calogic Corporation located in Fremont, CA, which was owned by Sipex Corporation. Calogic has retained the intellectual property and full rights to the processes of the JFET, DMOS, CMOS and Dielectrically Isolated technologies products. The company continues to operate out of the Fremont location and provide the highest quality and most reliable products which have been manufactured, assembled and tested by the Calogic Team over the past 35 years.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transistor & Electronic
Eic Semiconductor
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Sangdest Microelectronics (Nanjing)
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Diotec Semiconductor Ag
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
DG508ACJ
Vishay Siliconix
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4052D,653
NXP Semiconductors
NXP Semiconductors' 74HC4052D,653 is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125°C and has a max on-state resistance of 195 ohm. With a small outline package style, it's ideal for automotive applications requiring fast switching times and low on-state resistance.
ISL84781IRZ
Renesas Electronics
ISL84781IRZ by Renesas Electronics is an 8-channel single-ended multiplexer with a max on-state resistance of 0.85 ohm and a switch-on time of 35 ns. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring fast switching and low resistance. The IC features a compact square chip carrier package with a very thin profile, ideal for space-constrained designs that require reliable performance at supply voltages ranging from 1.6V to 3.6V.
DG442DY
Vishay Intertechnology's DG442DY is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 15V supply voltage. With a small outline package style, it suits industrial applications requiring separate output and break-before-make switching.
DG411DYZ-T
Renesas Electronics' DG411DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a small outline package for applications requiring high isolation at nominal voltage of +/-15 V.
TS5A3159MDBVREP
Texas Instruments
TS5A3159MDBVREP by Texas Instruments is a SPDT switch with 1.3 ohm Ron, 95 ns switch-on time, and 63 dB isolation. Ideal for military-grade applications due to its MIL-STD temperature range and low profile package design. Suitable for multiplexing and signal routing in compact electronic systems.
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
MAX4714EXT+T
Maxim Integrated
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4053BCM
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Siliconix
CD4051BQPWRQ1
CD4051BQPWRQ1 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at a nominal voltage of 5V and has a max on-state resistance of 1050 ohm. Ideal for automotive applications, it features a small outline package with surface mount capability.
CD4066BCM
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1404YRUZ-REEL7
Analog Devices
ADG1404YRUZ-REEL7 by Analog Devices is a CMOS multiplexer with 4 channels, 14 terminals, and on-state resistance of 4 ohm. It operates b/w -40 to 125 °C and has a peak reflow temp of 260 C. Ideal for automotive applications due to its small size (5x4.4 mm) and low supply current (0.28 mA).
DG403DYZ-T
Intersil
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS3A44159RGTR
TS3A44159RGTR by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm max on-state resistance. Operating at -40 to 85 °C, it has a nominal bandwidth of 35 kHz. Ideal for industrial applications requiring high isolation and low on-state resistance.
MAX14757EUE+T
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG409DYZ
Renesas Electronics DG409DYZ is a 16-terminal CMOS differential multiplexer with 4 channels. It operates b/w -40 to 85°C, with Vsup ranging from -20V to 20V. With a package size of 9.9mm x 3.9mm and terminal pitch of 1.27mm, it's ideal for industrial applications requiring fast switching times and high isolation levels.
NX3DV2567HR,115
NX3DV2567HR,115 by NXP Semiconductors is a CMOS multiplexer with 4 channels. It operates at a supply voltage range of 1.4-4.3V and offers a max on-state resistance of 0.85 ohm. Ideal for automotive applications due to its high temperature grade and compact chip carrier package style.
MAX4567EEE
MAX4567EEE by Maxim Integrated is a 16-terminal CMOS multiplexer with 2 functions. Operating at -40 to 85°C, it has a max on-state resistance of 60 ohm and switching voltage of ±5V. Ideal for audio/video switches, this IC offers industrial-grade performance in a small outline package.
TS12A4514DBVR
TS12A4514DBVR by Texas Instruments is a 5-terminal SPST switch with 40 ohm Ron, 175 ns switch-on time, and 475 kHz bandwidth. Ideal for industrial applications requiring low-profile switches with separate outputs and high isolation levels. Operating b/w -40 to 85 °C, it offers reliable performance in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-PDIP-T16;
DG508ACJ+
Analog Devices' DG508ACJ+ is a CMOS multiplexer with 8 channels, 450 ohm max on-state resistance, and 68 dB nominal off-state isolation. It operates at -15V to +18V supply voltage range and is ideal for commercial temperature grade applications requiring precise signal switching in electronic circuits.
Harris Semiconductor
DG508A-CJ
Thomson Consumer Electronics
Thomson Consumer Electronics' DG508A-CJ is an 8-channel single-ended multiplexer with a max on-state resistance of 400 ohm. Operating at +-15V power supplies, it features a switching time of 1500 ns and CMOS technology. The package style is in-line with a ceramic body material, making it suitable for applications requiring high-speed signal routing.
Vishay Intertechnology's DG508ACJ is an 8-channel CMOS multiplexer with a max on-state resistance of 450 ohm and max switch-on time of 1500 ns. It operates at temperatures b/w 0 to 70 °C and has a supply current of up to 2.4 mA. Ideal for applications requiring high-speed signal switching in commercial-grade environments.
DG508ADY-T
DG508ADY-T by Maxim Integrated is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of +-15V and has a max on-state resistance of 450 ohm. This small outline package is commonly used in industrial applications requiring signal switching.
DG508ADY+T
Analog Devices' DG508ADY+T is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 85 °C, with on-state resistance of 350 ohm and off-state isolation of 68 dB. Ideal for industrial applications requiring precise signal switching in compact designs.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG509BEQ-T1-E3
Vishay Intertechnology's DG509BEQ-T1-E3 is a CMOS multiplexer with 2 functions, 4 channels, and 16 terminals. It operates b/w -40 to 125 °C and supports supply voltages of +/-15 V. Ideal for automotive applications due to its small size, low power consumption (0.6 mA), and high off-state isolation (81 dB).
DG508AEWE+T
Analog Devices' DG508AEWE+T is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 350 ohm. With a package style of small outline, it is ideal for industrial applications requiring precise signal switching within a voltage range of ±18V.
DG508AEWE-T
DG508AEWE-T by Maxim Integrated is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of +-15V and offers a max on-state resistance of 450 ohm. With industrial temperature grade, it is suitable for applications requiring high-speed switching in harsh environments.
DG508ACK
Calogic
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved