Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TS5A3359DCURG4
Texas Instruments
TS5A3359DCURG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a 1.8/5 V power supply, 0.0012 mA max supply current, and 64 dB nominal off-state isolation. It operates in industrial temperature grade range (-40 to 85 °C) and has a compact package style for space-constrained applications.
SINGLE-ENDED MULTIPLEXER
5.5 V
1.65 V
R-PDSO-G8
e4
2.3 mm
1
NO
3
8
64 dB
.15 ohm
2.5 ohm
85 Cel
-40 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
VSSOP
TSSOP8,.12,20
RECTANGULAR
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
260
1.8/5
Not Qualified
.9 mm
Multiplexer or Switches
.0012 mA
1.8 V
YES
16 ns
85 ns
BREAK-BEFORE-MAKE
INDUSTRIAL
NICKEL PALLADIUM GOLD
GULL WING
.5 mm
DUAL
30
2 mm
TS5A3359DCUTG4
TS5A3359DCUTG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a supply voltage range of 1.65V to 5.5V, offering a max on-state resistance of 3.5 ohm and common output configuration. Ideal for industrial applications, it features a compact rectangular package style with very thin profile and shrink pitch, suitable for surface mount assembly. Operating b/w -40°C to 85°C, this switch guarantees fast response times with a max switch-on time of 85ns and off-time of 16ns.
75 kHz
0 V
3.5 ohm
COMMON OUTPUT
.001 mA
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
TS5V330DG4
TS5V330DG4 by Texas Instruments is a 4-function SPDT switch with 16 terminals, operating at -40 to 85°C. With a supply voltage range of 4-5.5V, it offers low on-state resistance (7 ohm) and high off-state isolation (60 dB). Ideal for industrial applications requiring fast switching times (6 ns) in a compact SMD package.
SPDT
R-PDSO-G16
9.9 mm
4
16
60 dB
7 ohm
SOP
SOP16,.25
SMALL OUTLINE
5
1.75 mm
.003 mA
4 V
5 V
6 ns
1.27 mm
3.9 mm
TS5V330PWG4
TS5V330PWG4 by Texas Instruments is a 4-channel SPDT switch with a supply voltage range of 4-5.5V and an on-state resistance of 10 ohm. It operates in industrial temperature grades, has a bandwidth of 300 kHz, and offers high off-state isolation at 60 dB. Ideal for applications requiring fast switching times and low power consumption.
300 kHz
5 mm
10 ohm
TSSOP
TSSOP16,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
.65 mm
4.4 mm
TS3L301DGGRG4
TS3L301DGGRG4 by Texas Instruments is an 8-channel differential multiplexer with a nominal bandwidth of 900 kHz. It operates at industrial temperature grade, with a max supply voltage of 3.6 V. Ideal for applications requiring high-speed switching and low on-state resistance in compact designs.
DIFFERENTIAL MULTIPLEXER
900 kHz
R-PDSO-G48
12.5 mm
48
39 dB
.2 ohm
8 ohm
TSSOP48,.3,20
3.3
.128 A
.6 mA
3.6 V
3 V
3.3 V
8.5 ns
11.5 ns
6.1 mm
TS5A3153DCURG4
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2-CHANNEL MUX/DEMUX
.16 ohm
2.7 ohm
21 ns
63 ns
NCN2612MTTWG
Onsemi
The Onsemi NCN2612MTTWG is a 6-function SPDT multiplexer with 3.3V supply voltage, 13 ohm max resistance, and 20ns switch-on time. Ideal for industrial applications requiring separate output signals in a compact chip carrier package with surface mount capability.
R-XQCC-N56
e3
6
56
13 ohm
UNSPECIFIED
QCCN
LCC56,.19X.43,20
CHIP CARRIER
20 ns
Tin (Sn)
NO LEAD
QUAD
NCN7200MTTWG
The Onsemi NCN7200MTTWG is a 7-function multiplexer with 2 channels, operating at temperatures from -40 to 85 °C. It has a max on-state resistance of 16 ohm and a supply current of 1.5 mA at 3.3V. Ideal for industrial applications requiring single-ended multiplexing in surface-mount designs.
R-XQCC-N42
2
7
42
16 ohm
LCC42,.14X.35,20
.12 A
1.5 mA
TIN
TS5N214PWG4
TS5N214PWG4 by Texas Instruments is a 16-terminal differential multiplexer with 2 channels, operating at an industrial temperature grade. It features a nominal bandwidth of 25 kHz, max on-state resistance of 12.5 ohm, and separate output voltage. Ideal for applications requiring high-speed signal switching in industrial settings.
25 kHz
10 V
50 dB
12.5 ohm
10 mA
5.25 V
4.75 V
200 ns
SN74AHC4066DBRG4
SN74AHC4066DBRG4 by Texas Instruments is a CMOS SPST switch with 4 channels, 225 ohm Ron, and 40 dB isolation. It operates at -40 to 85 °C and has a bandwidth of 50 kHz. Ideal for industrial applications requiring fast switching and low on-state resistance.
SPST
50 kHz
R-PDSO-G14
6.2 mm
14
40 dB
6 ohm
225 ohm
SSOP
SSOP14,.3
SMALL OUTLINE, SHRINK PITCH
2.5/5
.02 mA
2 V
2.3 V
25 ns
CMOS
5.3 mm
SN74HC4066PWRG4
SN74HC4066PWRG4 by Texas Instruments is a CMOS SPST switch with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 85 ohm and a bandwidth of 30 kHz. Ideal for industrial applications requiring low power consumption and fast switching times.
30 kHz
42 dB
85 ohm
TSSOP14,.25
2/6
.04 mA
6 V
4.5 V
40 ns
36 ns
MAKE-BEFORE-BREAK
SN74LV4051ADGVRG4
SN74LV4051ADGVRG4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at a supply voltage range of 2V to 5.5V. It offers a max on-state resistance of 225 ohm and nominal bandwidth of 35 kHz, suitable for industrial applications requiring high-speed signal switching in compact designs.
35 kHz
45 dB
2.1 ohm
TSSOP16,.25,16
.05 A
28 ns
.4 mm
3.6 mm
SN74AUC2G66DCURG4
SN74AUC2G66DCURG4 by Texas Instruments is a CMOS SPST switch with 2 channels, 40 ohm Ron, and 3 ns switch-on time. It operates at -40 to 85 °C and has a supply voltage range of 0.8V to 2.7V. Ideal for industrial applications requiring fast switching and low power consumption.
500 kHz
3 ohm
40 ohm
1.2/2.5
.01 mA
2.7 V
.8 V
1.1 V
4 ns
3 ns
SN74LVC1G66DBVTG4
SN74LVC1G66DBVTG4 by Texas Instruments is a SPST switch with 5 terminals, operating at 2.3V to 5.5V. It offers a max on-state resistance of 20 ohm and fast switching times of 6.5ns on and 6.9ns off, suitable for industrial applications requiring low-profile components in compact spaces.
R-PDSO-G5
2.9 mm
NC
12 ohm
20 ohm
LSSOP
TSOP5,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
.1 A
6.9 ns
6.5 ns
.95 mm
1.6 mm
74LVC1G3157DBVRG4
74LVC1G3157DBVRG4 by Texas Instruments is a SPDT multiplexer/switch with a supply voltage range of 1.65V to 5.5V and a max on-state resistance of 30 ohm. It is commonly used in industrial applications due to its small size, low power consumption, and high temperature tolerance (up to 85°C).
340 kHz
R-PDSO-G6
57 dB
.1 ohm
30 ohm
TSOP6,.11,37
Multiplexers or Switches
.035 mA
7.5 ns
14 ns
TS5A1066DBVRG4
TS5A1066DBVRG4 by Texas Instruments is a SPST switch with 80 ohm Ron, 13 ns switch-on time, and 68 dB isolation. It operates at -40 to 85 °C for industrial applications requiring common output switching up to 400 kHz bandwidth. The small outline package with dual terminals and low profile design makes it suitable for compact electronic devices.
400 kHz
6.5 V
68 dB
80 ohm
TSOP5/6,.11,37
.005 mA
5.5 ns
13 ns
TS5A2053DCURG4
TS5A2053DCURG4 by Texas Instruments is an 8-terminal SPDT switch with a 1.65-5.5V supply range, offering a max on-state resistance of 120 ohm and 64dB isolation. Ideal for industrial applications, it features a compact design (2x2.3mm) with common output and break-before-make switching for efficient signal routing in tight spaces.
330 kHz
NO/NC
2 ohm
120 ohm
14.5 ns
TS5N118PWG4
TS5N118PWG4 by Texas Instruments is a 16-terminal single-ended multiplexer with 12.5 ohm Ron, 200 ns switch-on/off time, and 50 dB isolation. Ideal for industrial applications requiring a compact design and reliable performance in the temperature range of -40 to 85°C.
ADG772BCPZ-REEL
Analog Devices
ADG772BCPZ-REEL by Analog Devices is a CMOS SPDT switch with 2 functions, 10 terminals, and 3.3V nominal voltage. Ideal for industrial applications requiring fast switching times (12.5 ns on-state, 9.5 ns off-state) and high isolation (73 dB). Suitable for surface mount designs with compact dimensions of 1.6mm x 1.3mm x 0.6mm.
R-XQCC-N10
10
73 dB
.04 ohm
8.8 ohm
VQCCN
LCC10,.05X.06,16
CHIP CARRIER, VERY THIN PROFILE
3/3.3
.6 mm
9.5 ns
12.5 ns
1.3 mm
MAX4595DCKRG4
MAX4595DCKRG4 by Texas Instruments is a SPST switch with 20 ohm Ron, 300 kHz bandwidth, and 80 dB isolation. It operates b/w -40 to 85 °C for industrial applications requiring fast switching times and low power consumption. The small outline package with gull wing terminals makes it suitable for compact designs needing high reliability.
80 dB
TSSOP5/6,.08
3/5
1.1 mm
50 ns
45 ns
1.25 mm
OPA4872IDG4
OPA4872IDG4 by Texas Instruments is a dual-terminal, single-ended multiplexer with a 14-terminal package. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of ±5V. With a compact rectangular shape and small outline style, it is ideal for industrial applications requiring common output functionality.
8.65 mm
-6 V
-3.5 V
-5 V
88 dB
SOP14,.25
+-5
11.7 mA
3.5 V
BIPOLAR
OPA4872IDR
OPA4872IDR by Texas Instruments is a 14-terminal multiplexer with ±5V power supplies, 5V nominal voltage, and 1.75mm max seated height. Ideal for industrial applications, it features a small outline package style and common output terminal for efficient signal switching at temperatures ranging from -40°C to 85°C.
12 V
7 V
OPA4872ID
OPA4872ID by Texas Instruments is a dual single-ended multiplexer with 14 terminals and a small outline package. It operates at temperatures ranging from -40 to 85°C, with a supply voltage of ±5V. Ideal for industrial applications requiring common output and high off-state isolation of 88dB.
TS3A24157RSERG4
TS3A24157RSERG4 by Texas Instruments is a SPDT switch with 2 channels, operating at -40 to 85°C. It has a low on-state resistance of 1 ohm and fast switching times of 80 ns turn-on and 40 ns turn-off. Ideal for industrial applications requiring high isolation (73 dB) and low power consumption (0.001 mA).
R-PQCC-N10
1 ohm
LCC10,.06X.08,20
1.8/3
1.95 V
80 ns
1.5 mm
MAX4594DCKRG4
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4595DBVRG4
MAX4595DBVRG4 by Texas Instruments is a SPST switch with 20 ohm Ron, 45 ns switch-on time, and 50 ns switch-off time. Ideal for industrial applications requiring a low-profile, small-outline package with dual terminals and 80 dB isolation at nominal bandwidth of 300 kHz.
NLAS5113DFT2G
NLAS5113DFT2G by Onsemi is a SPST switch with 6 terminals, operating b/w -40 to 85 °C. It has a low on-state resistance of 1.3 ohm and supports Vsup from 1.65V to 4.5V. Ideal for industrial applications requiring compact, surface-mount switches with precise voltage control.
.4 ohm
1.3 ohm
TSSOP6,.08
4.2 V
NLAS5113MUTBG
NLAS5113MUTBG by Onsemi is a SPST switch with 6 terminals, Vsup ranging from 1.65V to 4.5V, and Ron of 1.3 ohm. It operates in industrial temperature range (-40 to 85 °C) and is ideal for applications requiring a small outline, very thin profile package shape multiplexer & switches with surface mount capability.
R-XDSO-N6
VSON
SOLCC6,.04,16
SMALL OUTLINE, VERY THIN PROFILE
.55 mm
1 mm
NLAS5213AUSG
NLAS5213AUSG by Onsemi is an 8-terminal DPST switch with a max on-state resistance of 1.4 ohm and off-state isolation of 57 dB. Operating b/w -40 to 85 °C, it's ideal for industrial applications requiring a compact, surface-mountable solution with a nominal voltage of 3.3 V.
DPST
1.4 ohm
NLAS5213BMUTAG
NLAS5213BMUTAG by Onsemi is a dual SPST switch with 1.4 ohm Ron, 57 dB isolation, and 3.3V supply voltage. Ideal for industrial applications requiring high-performance multiplexing in compact spaces due to its small outline package and low on-state resistance.
R-XDSO-N8
1.8 mm
SOLCC8,.04,16
NLAS5213BUSG
NLAS5213BUSG by Onsemi is a dual-function SPST switch with 1.4 ohm Ron, 57 dB isolation, and 0.16 ohm resistance match. It operates at -40 to 85 °C, with Vsup ranging from 1.65V to 4.5V. Ideal for industrial applications requiring precise signal routing in compact spaces.
NLAS7222CMUTBG
NLAS7222CMUTBG by Onsemi is a CMOS DPDT switch with 10 terminals, operating at -40 to 85 °C. It has a supply voltage of 1.65-4.5V and offers separate outputs with on-state resistance of 10 ohm. Ideal for industrial applications requiring fast switching (30ns) and high isolation (22dB).
DPDT
22 dB
.85 ohm
LCC10,.06X.07,16
30 ns
1.4 mm
ADG426BRS-REEL7
ADG426BRS-REEL7 by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm and nominal off-state isolation of 75 dB. It operates in industrial temperature grade range from -40 to 85 °C, suitable for applications requiring high channel count and precise signal switching within a compact small outline package.
CAN ALSO OPERATE WITH SINGLE 12V SUPPLY
R-PDSO-G28
e0
10.2 mm
-16.5 V
-13.5 V
-15 V
28
75 dB
4 ohm
SSOP28,.3
240
12/+-15
.02 A
.5 mA
16.5 V
13.5 V
15 V
150 ns
BICMOS
Tin/Lead (Sn85Pb15)
ADG620BRMZ-REEL7
ADG620BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT CMOS switch with a max Ron of 6.5 ohm and 65 ns switch-on time. Ideal for industrial applications requiring common output, it operates b/w -40 to 85 °C with a supply voltage range of 2.7V to 5.5V, making it suitable for various multiplexing and switching tasks in compact designs.
ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
S-PDSO-G8
3 mm
-5.5 V
-2.7 V
67 dB
.7 ohm
6.5 ohm
TSSOP8,.19
SQUARE
330 ns
65 ns
MATTE TIN
ADG733BRQZ
ADG733BRQZ by Analog Devices is a SPDT multiplexer with 3 functions, operating at -40 to 85°C. It features a max on-state resistance of 4.5 ohm and switching time of 35 ns. Ideal for industrial applications requiring high isolation and low resistance in a compact package.
ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
4.9022 mm
-2.75 V
-2.25 V
-2.5 V
72 dB
4.5 ohm
SSOP16,.25
3/5/+-2.5
1.7526 mm
2.75 V
2.25 V
2.5 V
35 ns
.635 mm
3.9116 mm
ADG733BRQZ-REEL
ADG733BRQZ-REEL by Analog Devices is a SPDT multiplexer with 3 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and switching time of 35 ns. Ideal for industrial applications requiring high isolation and low resistance in a compact package.
ADG733BRQZ-REEL7
ADG733BRQZ-REEL7 by Analog Devices is a SPDT multiplexer with 3 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and switching time of 35 ns. Ideal for industrial applications requiring separate outputs and high isolation levels.
SW06GSZ-REEL
SW06GSZ-REEL by Analog Devices is a 4-function SPST multiplexer with 16 terminals, operating at -40 to 85 °C. It features a max on-state resistance of 150Ω, peak reflow temperature of 260°C, and nominal off-state isolation of 58dB. Ideal for industrial applications requiring precise signal switching in compact designs.
10.3 mm
58 dB
150 ohm
2.65 mm
500 ns
700 ns
BIMOS
7.5 mm
MAX338ETE-T
Maxim Integrated
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
S-XQCC-N16
-20 V
-4.5 V
400 ohm
HVQCCN
LCC16,.2SQ,32
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.8 mm
.03 A
20 V
TIN LEAD
SN74LVC2G66DCUTG4
SN74LVC2G66DCUTG4 by Texas Instruments is a CMOS SPST switch with 2 channels, 30 ohm Ron, and 5.6 ns switch-on time. It operates at temperatures from -40 to 85 °C and has a supply voltage range of 1.65-5.5 V. Ideal for industrial applications requiring fast switching and low on-state resistance.
5 ohm
.015 mA
5.6 ns
TS3A5017PWG4
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
165 kHz
48 dB
22 ohm
2.5/3.3
10 ns
TS5A2066DCURG4
TS5A2066DCURG4 by Texas Instruments is a dual SPST switch with 2 channels, operating at -40 to 85°C. It features a max on-state resistance of 120 ohm, switching time of 11.5 ns, and nominal bandwidth of 400 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
.9 ohm
5.2 ns
TS5A23167DCURG4
TS5A23167DCURG4 by Texas Instruments is a dual SPST switch with 2 channels, operating at -40 to 85°C. It features a low on-state resistance of 4 ohm and fast switching times of 18 ns turn-on and 15.5 ns turn-off. Ideal for industrial applications requiring high isolation (62 dB) and a nominal bandwidth of 150 kHz in a compact package style.
150 kHz
62 dB
.00075 mA
15.5 ns
18 ns
TS5A3157DBVRG4
TS5A3157DBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 160 ohm and offers high isolation of 65 dB. Ideal for industrial applications requiring fast switching with a bandwidth of 300 kHz.
VIDEO APPLICATION
65 dB
.5 ohm
160 ohm
2/5
24 ns
TS5A3159ADBVRG4
TS5A3159ADBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 2.5 ohm and fast switching times of 75 ns on and 50 ns off. Ideal for industrial applications requiring high isolation and low power consumption.
100 kHz
.0001 mA
75 ns
TS5A3166DBVRG4
TS5A3166DBVRG4 by Texas Instruments is a SPST switch with 3.4 ohm Ron, 19 ns switch-on time, and 64 dB isolation. Ideal for industrial applications requiring separate output switching at a bandwidth of 200 kHz. Compact design with low profile and shrink pitch package suitable for surface mount assembly.
200 kHz
-.5 V
3.4 ohm
1.8/5.5
.0008 mA
17.5 ns
19 ns
TS5A3357DCURG4
TS5A3357DCURG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a supply voltage range of 1.65V to 5.5V, offering a max on-state resistance of 50 ohm and nominal bandwidth of 334 kHz. Ideal for industrial applications, it features a small outline package style and break-before-make switching for efficient signal routing.
334 kHz
81 dB
.3 ohm
50 ohm
34 ns
TS5A3357DCUTG4
TS5A3357DCUTG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a max on-state resistance of 50 ohm. Operating in industrial temperature range, it offers 3 channels and nominal off-state isolation of 81 dB. Ideal for applications requiring high-speed switching with low resistance and compact design.
32 ns
© 2023 All rights reserved
