Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
CD4052BM96E4
Texas Instruments
CD4052BM96E4 by Texas Instruments is a CMOS differential multiplexer with 4 channels, 1050 ohm Ron, and 25 kHz bandwidth. It operates at -55 to 125 °C, has a 1.75 mm height, and is MILITARY grade suitable for signal switching applications requiring high isolation and low on-state resistance.
DIFFERENTIAL MULTIPLEXER
25 kHz
20.5 V
-.5 V
R-PDSO-G16
e4
9.9 mm
1
-5 V
NC
4
16
40 dB
15 ohm
1050 ohm
125 Cel
-55 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
SOP
SOP16,.25
RECTANGULAR
SMALL OUTLINE
260
5/15
Not Qualified
1.75 mm
.01 A
Multiplexer or Switches
3 mA
20 V
3 V
5 V
YES
720 ns
BREAK-BEFORE-MAKE
CMOS
MILITARY
NICKEL PALLADIUM GOLD
GULL WING
1.27 mm
DUAL
30
3.9 mm
CD4067BM96E4
CD4067BM96E4 by Texas Instruments is a CMOS multiplexer with 16 channels, operating at a nominal voltage of 5V. It features a max on-state resistance of 1050 ohm and offers separate outputs. This small outline package is ideal for military-grade applications requiring high-speed switching capabilities.
SINGLE-ENDED MULTIPLEXER
14 kHz
R-PDSO-G24
15.4 mm
NO
24
SOP24,.4
2.65 mm
.025 A
.6 mA
18 V
440 ns
650 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
7.5 mm
CD4067BME4
CD4067BME4 by Texas Instruments is a CMOS multiplexer with 16 channels, 1050 ohm max on-state resistance, and 650 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring high-speed signal switching in compact designs.
CD4067BNSRE4
CD4067BNSRE4 by Texas Instruments is a CMOS multiplexer with 16 channels, 1050 ohm max resistance, and 650 ns switch-on time. Ideal for military-grade applications requiring small outline packages and low power consumption at supply voltages ranging from 3V to 18V.
15 mm
SOP24,.3
2 mm
5.3 mm
CD4097BM96E4
CD4097BM96E4 by Texas Instruments is a CMOS differential multiplexer with 8 channels, operating at temperatures from -55 to 125 °C. It has a max supply voltage of 18 V and on-state resistance of 1050 ohm. Ideal for military-grade applications requiring fast switching times and low signal current consumption.
8
CD4097BME4
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
20 kHz
2
1300 ohm
CD74HC4066M96G4
CD74HC4066M96G4 by Texas Instruments is a CMOS SPST switch with 4 functions, operating at temperatures from -55 to 125°C. It has a max on-state resistance of 95 ohm and nominal off-state isolation of 72 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
SPST
10 V
2 V
R-PDSO-G14
8.65 mm
14
72 dB
1 ohm
95 ohm
SOP14,.25
2/10
4.5 V
45 ns
30 ns
MAKE-BEFORE-BREAK
CD74HC4066MG4
CD74HC4066MG4 by Texas Instruments is a CMOS SPST switch with 4 channels, 142 ohm Ron, and 200 kHz bandwidth. It operates b/w -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high isolation levels in compact designs.
200 kHz
142 ohm
.02 mA
CD74HC4316ME4
CD74HC4316ME4 by Texas Instruments is a CMOS SPST multiplexer with 4 channels, 480 ohm Ron, and 200 kHz bandwidth. It operates b/w -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high off-state isolation in compact designs.
ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY
6 V
0 V
-1 V
-4.5 V
62 dB
5 ohm
480 ohm
2/6,GND/-6
.08 mA
1 V
34 ns
CD74HCT4066M96G4
CD74HCT4066M96G4 by Texas Instruments is a CMOS SPST switch with 4 functions, operating at 5V. It features a max on-state resistance of 95 ohm and offers separate outputs. This military-grade device is ideal for applications requiring fast switching times and high isolation levels.
5
5.5 V
53 ns
36 ns
CD74HCT4067ME4
CD74HCT4067ME4 by Texas Instruments is a 24-terminal CMOS multiplexer with 5V supply voltage. It offers separate output, 270 ohm on-state resistance, and 89 kHz nominal bandwidth. Ideal for military-grade applications requiring high-speed signal switching in compact spaces.
89 kHz
75 dB
10 ohm
270 ohm
58 ns
60 ns
SN65LVCP22DG4
SN65LVCP22DG4 by Texas Instruments is a BICMOS technology-based cross point switch with 2 channels, operating at a supply voltage range of 3V to 3.6V. It features separate outputs, dual terminal position, and fast switching times of 4ns. Ideal for industrial applications requiring high-speed signal multiplexing in compact designs.
CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER
CROSS POINT SWITCH
85 Cel
-40 Cel
3.3
.087 mA
3.6 V
3.3 V
4 ns
BICMOS
INDUSTRIAL
SN74HC4066DRE4
SN74HC4066DRE4 by Texas Instruments is a CMOS SPST switch with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 85 ohm and nominal bandwidth of 30 kHz. Ideal for industrial applications requiring separate outputs and make-before-break switching.
30 kHz
42 dB
85 ohm
2/6
.04 mA
40 ns
3.905 mm
SN74HC4066DRG4
SN74HC4066DRG4 by Texas Instruments is a CMOS SPST switch with 4 channels, 150 ohm on-state resistance, and 30 kHz nominal bandwidth. It operates at -40 to 85 °C and has a supply voltage range of 2-6 V. Ideal for industrial applications requiring fast switching times and low power consumption.
150 ohm
SN74HC4851DRE4
SN74HC4851DRE4 by Texas Instruments is a CMOS multiplexer with 16 terminals, operating voltage of 2-6V, and on-state resistance of 700 ohm. It is used in automotive applications for signal switching with a max current of 0.05A and temperature range from -40 to 125°C.
2 ohm
700 ohm
.05 A
90 ns
AUTOMOTIVE
SN74LV4051ADRE4
SN74LV4051ADRE4 by Texas Instruments is an 8-channel single-ended multiplexer with a max supply voltage of 5.5V and on-state resistance of 180 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style, making it suitable for various switching applications in electronic circuits.
45 dB
2.1 ohm
180 ohm
2.3 V
28 ns
SN74LV4052ADRE4
SN74LV4052ADRE4 by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and has a max on-state resistance of 180 ohm. This industrial-grade switch has a small outline package suitable for applications requiring fast switching times and low power consumption.
1.5 ohm
2.5 V
35 ns
TL52055DRE4
TL52055DRE4 by Texas Instruments is a BICMOS technology multiplexer with 3 functions, 2 channels, and operates at industrial temperature grade. It has a supply voltage range of 4.5V to 9V, making it suitable for audio/video switch applications in various industries. This small outline package features surface mount design with nickel palladium gold terminal finish.
AUDIO/VIDEO SWITCH
3
SOP8,.25
5/9
9 V
TS3A5018DE4
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SPDT
300 kHz
48 dB
.4 ohm
22 ohm
2.5/3.3
.1 A
.002 mA
9 ns
10.5 ns
TS3A5018DRE4
TS3A5018DRE4 by Texas Instruments is a 4-function SPDT switch with 16 terminals, operating at -40 to 85°C. It has a max on-state resistance of 20 ohm, switching time of 10.5 ns, and bandwidth of 300 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
20 ohm
TS3L100DE4
TS3L100DE4 by Texas Instruments is a 4-function SPDT switch with 15 ohm Ron, 7.5 ns switch-on time, and 0.128 A signal current. Ideal for applications requiring fast switching and low on-state resistance in commercial temperature grades.
70 Cel
0 Cel
.128 A
.003 mA
3.5 ns
7.5 ns
COMMERCIAL
TS3V340DRE4
TS3V340DRE4 by Texas Instruments is a 4-function SPDT multiplexer with 16 terminals, operating at 3.3V. With a bandwidth of 500 kHz and off-state isolation of 60 dB, it is ideal for industrial applications requiring fast switching times and low on-state resistance. The small outline package makes it suitable for compact designs in temperature-sensitive environments.
500 kHz
60 dB
6 ohm
1.5 mA
7 ns
MPC507AUG4
The Texas Instruments MPC507AUG4 is a CMOS differential multiplexer with 2 channels, operating at industrial temperature grade. It features a max on-state resistance of 1800 ohm and common output voltage. Ideal for applications requiring high-speed switching with a max supply current of 1.5 mA.
15 V
-15 V
R-PDSO-G28
17.9 mm
28
68 dB
1800 ohm
COMMON OUTPUT
SOP28,.4
+-15
.02 A
500 ns
ADG611YRZ
Analog Devices
ADG611YRZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125 °C. With a max on-state resistance of 115 ohm and switching time of 260 ns, it's ideal for automotive applications requiring low power consumption and high isolation levels. This small outline package features separate outputs and break-before-make switching for precise signal control in compact designs.
e3
-5.5 V
-2.7 V
65 dB
115 ohm
3/5/+-5
.001 mA
2.7 V
65 ns
260 ns
MATTE TIN
SW06GSZ
The Analog Devices SW06GSZ is a 4-function SPST multiplexer with 16 terminals in a small outline package. It operates b/w -40 to 85°C, with a max on-state resistance of 150 ohm and off-state isolation of 58 dB. Ideal for industrial applications requiring precise signal switching within tight space constraints.
10.3 mm
58 dB
700 ns
BIMOS
TS3L110DE4
TS3L110DE4 by Texas Instruments is a 4-channel SPDT switch with a nominal bandwidth of 500 kHz. It operates at an industrial temperature grade range from -40 to 85°C and has a max supply voltage of 3.6V. With a compact small outline package style, it is ideal for applications requiring fast switching speeds and low on-state resistance.
28 dB
.9 ohm
8 ohm
5 ns
MC74HC4066AFELG
Onsemi
MC74HC4066AFELG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY grade. Ideal for applications requiring separate output switching in compact designs.
10.2 mm
120 ohm
SOP14,.3
2/12
2.05 mm
12 V
5.275 mm
MPC509AUG4
The Texas Instruments MPC509AUG4 is a CMOS differential multiplexer with 4 channels, operating at -40 to 85°C. It has a max on-state resistance of 1500 ohm and common output voltage of ±15V. Ideal for industrial applications requiring fast switching times and high off-state isolation.
1500 ohm
SOP16,.4
ADG408BR-REEL7
ADG408BR-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage of +/-15V, has a max on-state resistance of 100 ohm, and switching time of 150 ns. Ideal for industrial applications requiring high isolation and low power consumption.
CAN ALSO OPERATE WITH 12V SUPPLY
e0
100 ohm
240
12/+-15
.5 mA
150 ns
TIN LEAD
ADG441ABR-REEL
ADG441ABR-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 70 ohm Ron, and 110 ns switch-on time. It operates in industrial temperature range and is ideal for applications requiring fast switching and low on-state resistance.
-16.5 V
-13.5 V
70 ohm
16.5 V
13.5 V
110 ns
DG509AEWE-C30144
Maxim Integrated
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
-18 V
27 ohm
450 ohm
.04 A
.2 mA
1000 ns
1500 ns
20
MUX508ID
The Texas Instruments MUX508ID is an 8-channel single-ended multiplexer with a max bandwidth of 500 kHz. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a low on-state resistance of 200 ohm and fast switching times of 151 ns, this CMOS technology-based device offers efficient signal routing in compact designs.
85 dB
2.4 ohm
200 ohm
.03 A
.062 mA
151 ns
Matte Tin (Sn)
MUX509ID
MUX509ID by Texas Instruments is a 4-channel CMOS differential multiplexer with 200 ohm Ron, 500 kHz bandwidth, and -40 to 125 °C operating temp. Ideal for automotive applications, it features a small outline package with gull wing terminals and common output.
ADG5298HFRZ
ADG5298HFRZ by Analog Devices is a MOS technology multiplexer with 8 channels, 16 terminals, and -55 to 210°C operating temperature range. It features a common output, 800 ohm max on-state resistance, and break-before-make switching suitable for military applications.
DUAL SWITCHING CONTROLLER
22 V
R-CDSO-G16
10.16 mm
-22 V
-9 V
86 dB
800 ohm
210 Cel
CERAMIC, METAL-SEALED COFIRED
SOP16,.5
3.02 mm
245 ns
MOS
6.86 mm
ADG798HFRZ
ADG798HFRZ by Analog Devices is a ceramic, metal-sealed co-fired multiplexer with 8 channels. It operates at temperatures ranging from -55 to 210 °C and has a max on-state resistance of 10 ohm. Ideal for applications requiring common output switching with fast response times.
-2.25 V
-2.75 V
-2.5 V
80 dB
1.25 ohm
.0000008 A
.07 mA
2.75 V
2.25 V
20 ns
OTHER
NLHV4052DR2G
NLHV4052DR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates b/w -55 to 125 °C and has a supply voltage range of 3-18 V. With a max on-state resistance of 1050 ohm, it is ideal for military-grade applications requiring high isolation and low resistance switching.
50 dB
25 ohm
75 ns
NLV74VHC4066DR2G
NLV74VHC4066DR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at temperatures from -55 to 125 °C. With a supply voltage range of 2-12 V, it offers fast switching times of 100 ns on and 110 ns off. Ideal for military-grade applications requiring high isolation levels up to 40 dB.
100 ns
NLVVHC4053DTR2G
NLVVHC4053DTR2G by Onsemi is a CMOS single-ended multiplexer with 16 terminals. It operates b/w -55 to 125 °C and has a max supply voltage of 12 V. Ideal for military-grade applications, it offers fast switching times of 83 ns on and 76 ns off, with an on-state resistance of 170 ohm.
5 mm
-6 V
18 ohm
170 ohm
TSSOP16,.25
AEC-Q100
1.2 mm
76 ns
83 ns
.65 mm
4.4 mm
74HC4067D-Q100J
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
9 ohm
435 ns
450 ns
74HCT4067D-Q100J
Nexperia's 74HCT4067D-Q100J is an AEC-Q100 compliant multiplexer with 16 channels, 180 ohm max on-state resistance, and 98 ns switch-on time. Ideal for automotive applications due to its nickel palladium gold finish, -40 to 125 °C operating temp range, and small outline package style.
98 ns
74LV4053D-Q100J
Nexperia's 74LV4053D-Q100J is a CMOS SPDT multiplexer with 3 channels, suitable for automotive applications. It operates at a supply voltage range of 1V to 6V and offers a max on-state resistance of 435 ohm. With AEC-Q100 screening level, it ensures reliable performance in temperatures ranging from -40°C to 125°C.
435 ohm
73 ns
97 ns
NICKEL PALLADIUM GOLD SILVER
HCF4067M013TR
STMicroelectronics
HCF4067M013TR by STMicroelectronics is a 24-terminal CMOS multiplexer with 16 channels. It operates b/w -55 to 125 °C and has a supply voltage range of 3-20 V. With a max on-state resistance of 1050 ohm, it is ideal for military-grade applications requiring precise signal switching in compact spaces.
SOP20,.4
250
74HC4053D,118
NXP Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
160 ohm
37 ns
© 2023 All rights reserved
