Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SN95161BJ
Texas Instruments
SN95161BJ by Texas Instruments is an 8-bit bus driver with 60ns propagation delay at 5V. It features open-collector output, TTL technology, and bidirectional count direction. Ideal for applications requiring common control in a ceramic package with rectangular shape.
COMMON CONTROL
BIDIRECTIONAL
R-XDIP-T20
8
1
20
100 Cel
0 Cel
OPEN-COLLECTOR
TRUE
CERAMIC
DIP
DIP20,.3
RECTANGULAR
IN-LINE
5
Not Qualified
Bus Driver/Transceivers
NO
TTL
OTHER
THROUGH-HOLE
2.54 mm
DUAL
SN74AS643N
SN74AS643N by Texas Instruments is an 8-bit bus driver with 3-STATE output characteristics. It operates in a temperature range of 0°C to 70°C, making it suitable for commercial applications. With bidirectional count direction and common control, this TTL technology device is ideal for various electronic systems.
R-PDIP-T20
70 Cel
3-STATE
COMPLEMENTARY
PLASTIC/EPOXY
COMMERCIAL
TC74HC367AP(F)
Toshiba
BUS DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
ENABLE LOW
R-PDIP-T16
50 pF
BUS DRIVER
6 Amp
6
2
16
85 Cel
-40 Cel
DIP16,.3
TUBE
2/6
CMOS
INDUSTRIAL
74HC540N-Q100U
NXP Semiconductors
74HC540N-Q100U by NXP is an 8-bit bus driver with a propagation delay of just 30 ns, ideal for automotive applications. It operates b/w -40 °C to 125 °C and supports up to 6A output in a compact dual in-line package. This CMOS device features inverted outputs and AEC-Q100 screening.
125 Cel
INVERTED
AEC-Q100
AUTOMOTIVE
74HCT540N-Q100U
74HCT540N-Q100U by NXP is an 8-bit bus driver with a propagation delay of 36 ns and operates at a nominal voltage of 5V. It features a temperature range from -40 °C to 125 °C, making it ideal for automotive applications. This CMOS device supports 3-state output and handles up to 6A.
TC74HC126AP(F)
BUS DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
ENABLE HIGH
R-PDIP-T14
4
14
DIP14,.3
TC74ACT244P(F)
BUS DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
24 Amp
260
30
TC74HCT540AP(F)
TC74ACT541P(F)
SN54F240J
SN54F240J by Texas Instruments is a TTL technology bus driver with 2 functions, 4 bits, and 20 terminals. It has a propagation delay of 6 ns at nominal voltage of 5V. Ideal for military applications due to its inverted output polarity and enable low control type.
UNIDIRECTIONAL
F/FAST
R-GDIP-T20
e0
24.195 mm
64 Amp
-55 Cel
CERAMIC, GLASS-SEALED
NOT SPECIFIED
75 mA
6 ns
5.08 mm
5.5 V
4.5 V
MILITARY
Tin/Lead (Sn/Pb)
7.62 mm
SN54F244J
SN54F244J by Texas Instruments is a TTL bus driver with 2 functions, 4 bits, and 20 terminals. It has a propagation delay of 7 ns at nominal voltage of 5V. Ideal for applications requiring true output polarity and enable low control type in military-grade environments.
90 mA
7 ns
SN54F373J
SN54F373J by Texas Instruments is an 8-bit bus driver with 3-STATE output, operating at a max temperature of 125°C. It features a propagation delay of 8.5 ns and supports a load capacitance of 50 pF. Ideal for military-grade applications requiring TTL technology and low enable control type.
20 Amp
55 mA
8.5 ns
FF/Latches
SN54F374J
SN54F374J by Texas Instruments is an 8-bit bus driver with a propagation delay of 11ns at 5V. It features a 3-STATE output and operates b/w -55°C to 125°C, making it suitable for military-grade applications. With a max frequency of 60MHz, this TTL technology device is ideal for unidirectional data transmission in harsh environments.
60000000 Hz
86 mA
11 ns
POSITIVE EDGE
SN54F623J
SN54F623J by Texas Instruments is an 8-bit bus driver with a propagation delay of 12.4 ns at 5V, ideal for military-grade applications. It features a max operating temperature of 125°C, output polarity TRUE, and independent control for bidirectional data transmission.
IOL = 20MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A
INDEPENDENT CONTROL
BUS TRANSCEIVER
48 Amp
140 mA
8 ns
N/A
SN74AS240N
SN74AS240N by Texas Instruments is a TTL technology bus driver with 2 functions, 4 bits, and 20 terminals. It operates at a nominal voltage of 5V with a propagation delay of 6.5ns. Ideal for applications requiring inverted output polarity and enable low control type in commercial temperature grade environments.
IOL @ VCC = 4.75V
AS
24.325 mm
6.5 ns
SN74F543NT
SN74F543NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.5 ns at 5V, featuring 3-STATE output characteristics. It operates within a temperature range of 0 to 70°C and has a max power supply current of 125mA. Ideal for bidirectional data transmission in commercial-grade applications.
IOL = 24MA @ VOL = 0.5V FOR PORT A; IOH = 3MA @ VOH = 2.4V FOR PORT A
R-PDIP-T24
e4
31.64 mm
REGISTERED BUS TRANSCEIVER
24
DIP24,.3
125 mA
12.5 ns
NICKEL PALLADIUM GOLD
SN54AS821JT
SN54AS821JT by Texas Instruments is a 10-bit bus driver with 3-STATE output, operating at a supply voltage of 5V. It features a propagation delay of 11.5ns and can handle load capacitance up to 50pF. Ideal for military-grade applications requiring reliable TTL technology in an in-line package style.
POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION
R-GDIP-T24
32.005 mm
10
109 mA
11.5 ns
SN54AS873JT
SN54AS873JT by Texas Instruments is a 4-bit bus driver with 2 functions, featuring a propagation delay of 14 ns at 5V. With a package style of IN-LINE and through-hole terminal form, it operates in military-grade temperatures from -55 to 125°C. Ideal for applications requiring high-speed signal transmission in harsh environments.
WITH CLEAR
32 Amp
110 mA
14 ns
SN54BCT126AJ
SN54BCT126AJ by Texas Instruments is a 4-function bus driver with 7.7 ns propagation delay at 5V, ideal for military applications. Featuring 3-STATE output characteristics, it operates b/w -55 to 125 °C and has a max power supply current of 51 mA. With a package style of IN-LINE, it offers true output polarity and Tin/Lead terminal finish.
BCT/FBT
R-GDIP-T14
19.56 mm
51 mA
7.7 ns
BICMOS
SN64BCT240N
SN64BCT240N by Texas Instruments is a 20-terminal bus driver with 4 bits, featuring a propagation delay of 6.4 ns and max I (ol) of 64 Amp. It operates at a nominal voltage of 5V and is ideal for industrial applications requiring fast signal transmission in electronic circuits.
71 mA
4.5 ns
SN74BCT2244N
SN74BCT2244N by Texas Instruments is a 20-terminal bus driver with 6.7 ns propagation delay at 5V, ideal for true output polarity applications. It features 2 functions, operates b/w 0-70°C, and has a max power supply current of 77mA.
33 OHM OUTPUT SERIES RESISTOR
25.4 mm
12 Amp
3-STATE WITH SERIES RESISTOR
77 mA
6.7 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
SN74BCT244N
SN74BCT244N by Texas Instruments is a 20-terminal bus driver with 5.5 ns propagation delay, suitable for commercial applications. It operates at a nominal voltage of 5V and has a load capacitance of 50 pF. With true output polarity and 3-STATE output characteristics, it is ideal for unidirectional control in various electronic systems.
80 mA
5.5 ns
SN74BCT29825NT
SN74BCT29825NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 9ns and operates at a supply voltage of 5V. It features 3-STATE output characteristics, positive edge trigger type, and can handle a max frequency of 125MHz. Ideal for applications requiring fast signal transmission in commercial temperature environments.
WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE
125000000 Hz
40 mA
8.4 ns
SN74BCT29843NT
SN74BCT29843NT by Texas Instruments is a 9-bit bus driver with 3-STATE output characteristics. It operates at a nominal voltage of 5V, has a propagation delay of 10ns, and can handle a max power supply current of 35mA. This IC is commonly used in applications requiring efficient signal transmission and control within electronic systems.
WITH CLEAR AND PRESET
9
35 mA
10 ns
SN74BCT543NT
SN74BCT543NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.6 ns and operates at a nominal voltage of 5V. It features 3-STATE output characteristics, making it suitable for bidirectional control applications in commercial-grade environments. The package style is IN-LINE with a rectangular shape, ideal for through-hole mounting with dual terminal positions.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
12.7 ns
M74HC125B1R
STMicroelectronics
STMicroelectronics M74HC125B1R is a 4-function bus driver with 22ns propagation delay at 4.5V. It operates in a temperature range of -55 to 125°C, suitable for military-grade applications. The package style is in-line with dual terminals and output polarity is true, making it ideal for high-speed signal transmission.
HC/UH
150 pF
160 ns
5.1 mm
6 V
2 V
4.5
M74HC126B1R
M74HC126B1R by STMicroelectronics is a 4-function bus driver with 22ns propagation delay at 4.5V, suitable for military-grade applications. It features a max I (ol) of 6A, operates b/w -55 to 125 °C, and has a package style of IN-LINE. With TRUE output polarity and ENABLE HIGH control type, it is ideal for high-speed signal transmission in harsh environments.
e3
MATTE TIN
M74HC240B1R
STMicroelectronics M74HC240B1R is a 4-bit bus driver with 27ns propagation delay, 150pF load capacitance, and 6A max I (ol). It is used in military-grade applications requiring inverted output polarity and ENABLE LOW control type.
195 ns
3.93 mm
M74HC241B1R
STMicroelectronics M74HC241B1R is a 4-bit bus driver with 27ns propagation delay, 150pF load capacitance, and 6A max I (ol). It operates at -55 to 125 °C and has TRUE output polarity. Ideal for military-grade applications requiring fast signal transmission in a compact IN-LINE package.
OUTPUT ENABLE ACTIVE HIGH FOR ONE FUNCTION
ENABLE LOW/HIGH
M74HC244B1R
BUS DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
M74HC245B1R
M74HC245B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 27ns at 4.5V, suitable for bidirectional applications. It features a max operating temperature of 125 °C, true output polarity, and a common control interface. This CMOS technology device has dual terminals in an inline package style with matte tin finish.
WITH DIRECTION CONTROL
180 ns
M74HC365B1R
M74HC365B1R by STMicroelectronics is a 6-bit bus driver with 27ns propagation delay, operating at 4.5V. It features 3-STATE output characteristics and can handle up to 6A of current. Ideal for military-grade applications requiring fast signal transmission in a compact IN-LINE package style.
WITH DUAL OUTPUT ENABLE
M74HC367B1R
M74HC367B1R by STMicroelectronics is a 6-bit bus driver with 26ns propagation delay, operating at supply voltages from 2V to 6V. It features a 3-STATE output and is designed for military-grade applications requiring true output polarity control. The package style is in-line with dual terminal position, making it suitable for high-reliability systems.
ONE FUNCTION WITH TWO BITS
M74HC373B1R
STMicroelectronics M74HC373B1R is an 8-bit bus driver with 31ns propagation delay, operating at a supply voltage of 4.5V. It features 3-STATE output characteristics and is suitable for military-grade applications requiring CMOS technology and a temperature range of -55 to 125 °C.
265 ns
40
M74HC374B1R
STMicroelectronics M74HC374B1R is an 8-bit bus driver with 3-STATE output, operating at a max frequency of 21MHz. It has a propagation delay of 285ns and can handle a load capacitance of 150pF. Ideal for military-grade applications requiring positive edge triggering and dual terminal position in a compact rectangular package.
21000000 Hz
285 ns
M74HC533B1R
M74HC533B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 38ns at 4.5V, suitable for military-grade applications. It features a max operating temperature of 125 °C, output polarity is inverted, and has a terminal pitch of 2.54mm in a rectangular package style.
M74HC534B1R
STMicroelectronics M74HC534B1R is an 8-bit bus driver with 3-STATE output, operating at a max frequency of 21MHz. It has a supply voltage range of 2-6V and can handle load capacitance up to 150pF. Ideal for military-grade applications requiring positive edge triggering and inverted output polarity.
M74HC540B1R
M74HC540B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 26ns at 4.5V, suitable for military-grade applications. It features a max operating temperature of 125 °C, output polarity is inverted, and has a load capacitance of 150pF.
175 ns
M74HC541B1R
M74HC541B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 26ns at 4.5V, suitable for military-grade applications. It features a max operating temperature of 125 °C, output polarity TRUE, and a terminal pitch of 2.54mm in a PLASTIC/EPOXY package style.
M74HC563B1R
M74HC563B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 33ns. It operates at a nominal voltage of 4.5V and has a load capacitance of 150pF. This CMOS technology component is ideal for military-grade applications requiring inverted output polarity and 3-STATE output characteristics.
BROADSIDE VERSION OF 533
235 ns
M74HC564B1R
M74HC564B1R by STMicroelectronics is an 8-bit bus driver with a max operating temperature of 125 °C. It features a load capacitance of 150 pF and a propagation delay of 285 ns, making it suitable for military-grade applications requiring high-speed data transmission.
BROADSIDE VERSION OF 534
M74HC573B1R
M74HC573B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 33ns. It operates at a supply voltage range of 2-6V and has a max operating temperature of 125 °C. Ideal for applications requiring fast data transmission in military-grade environments.
BROADSIDE VERSION OF 373
M74HC574B1R
M74HC574B1R by STMicroelectronics is an 8-bit bus driver with a max operating temperature of 125 °C. It has a propagation delay of 285 ns and can handle a load capacitance of 150 pF. Ideal for applications requiring true output polarity and positive edge trigger type in military-grade environments.
BROADSIDE VERSION OF 374
M74HC623B1R
M74HC623B1R by STMicroelectronics is an 8-bit bus driver with a propagation delay of 26ns at 4.5V, suitable for bidirectional control applications. It features a max operating temperature of 125 °C, output polarity TRUE, and a load capacitance of 150pF. Ideal for military-grade systems requiring independent control in a compact IN-LINE package style.
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
M74HCT125B1R
M74HCT125B1R by STMicroelectronics is a 4-function bus driver with 32ns propagation delay at 5V. It features 3-STATE output characteristics, operates in temperatures from -55 to 125 °C, and has a max seated height of 5.1mm. Ideal for military-grade applications requiring CMOS technology and dual-terminal position control.
HCT
41 ns
M74HCT126B1R
M74HCT126B1R by STMicroelectronics is a 4-function bus driver with 32ns propagation delay at 5V. It features 3-STATE output characteristics, operates b/w -55 to 125 °C, and has a max I (ol) of 6A. Ideal for military-grade applications requiring high-speed signal transmission in harsh environments.
M74HCT240B1R
STMicroelectronics M74HCT240B1R is a 20-terminal CMOS bus driver with 33ns propagation delay and 6A max I (ol). It operates at -55 to 125 °C, suitable for military-grade applications requiring inverted output polarity and 3-STATE output characteristics.
45 ns
M74HCT244B1R
M74HCT244B1R by STMicroelectronics is a CMOS bus driver with 2 functions, 4 bits, and 3-STATE output characteristics. It operates at a supply voltage of 5V with a propagation delay of 38ns, making it ideal for military-grade applications requiring fast signal transmission. The package style is in-line with dual terminal position and matte tin finish.
50 ns
© 2023 All rights reserved
