Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LM224KDG4
Texas Instruments
LM224KDG4 by Texas Instruments is a quad operational amplifier with 14 terminals and a supply voltage of +-1.5/+-16/3/32V. It features a max input offset voltage of 7000uV, bias current of -300uA, and common mode reject ratio of 80dB. Ideal for applications requiring high voltage gain and low power consumption in small outline packages.
Operational Amplifier
Voltage Feedback
BIPOLAR
±1.5/±16/3/32 V
4
Operational Amplifiers
Yes
No
1.2 MHz
80 dB
7000 uV
25000
0.5 V/us
-300 uA
150 nA
5 V
32 V
-25 °C (-13 °F)
85 °C (185 °F)
260 °C (500 °F)
30 s
3 mA
0.341 in (8.65 mm)
0.154 in (3.9 mm)
0.069 in (1.75 mm)
14
0.05 in (1.27 mm)
Dual
Gull Wing
Nickel Palladium Gold
Plastic/Epoxy
1
Other
R-PDSO-G14
e4
Tube
SOP
Rectangular
Small Outline
SOP14,.25
LM224KDRG4
LM224KDRG4 by Texas Instruments is a quad operational amplifier with 4 functions, offering low-bias and micropower features. It has a max input offset voltage of 5000 uV, nominal voltage of 5 V, and unity gain bandwidth of 1200 kHz. Ideal for applications requiring high voltage supplies and precise signal amplification in compact designs.
70 dB
5000 uV
100 nA
-300 nA
250 nA
Tape And Reel
LM258ADRG4
LM258ADRG4 by Texas Instruments is a dual operational amplifier with a max supply voltage of 32V and nominal unity gain bandwidth of 700 kHz. It features a max input offset voltage of 4000 uV, making it suitable for applications requiring precise signal amplification in various electronic circuits. With a compact small outline package style and surface mount capability, this op amp is ideal for space-constrained designs where high performance and reliability are essential.
±1.5/±15/3/30 V
2
700 kHz
4000 uV
50000
0.3 V/us
15 nA
-100 nA
80 nA
1.2 mA
0.193 in (4.9 mm)
8
Nickel/Palladium/Gold
R-PDSO-G8
SOP8,.24
LM2902KDG4
LM2902KDG4 by Texas Instruments is a quad operational amplifier with 4 functions, featuring low bias current of 0.25uA @25C and micropower technology. With a nominal voltage of 5V, it operates in automotive-grade applications at temperatures ranging from -40 to 125 °C. Its small outline package makes it suitable for space-constrained designs requiring high common mode rejection ratio and frequency compensation up to 1200 kHz.
±1.5/±13/3/26 V
50 dB
15000
300 nA
-500 nA
26 V
-40 °C (-40 °F)
125 °C (257 °F)
Automotive
TL031IDG4
TL031IDG4 by Texas Instruments is an Operational Amplifier with 1500uV Max Input Offset Voltage, 94dB Nominal CMRR, and 1V/us Min Slew Rate. Ideal for industrial applications requiring low-bias amplification in a compact package with BIFET technology.
BIFET
±5/±15 V
1.1 MHz
94 dB
75 dB
1500 uV
3000
1 V/us
2.9 V/us
100 pA
900 pA
200 pA
18 V
-5 V
-18 V
280 μA
Industrial
SOP8,.25
TL032IDRG4
TL032IDRG4 by Texas Instruments is a dual operational amplifier with a max input offset voltage of 1500 uV and a min slew rate of 1 V/us. It is commonly used in industrial applications that require low-bias amplification and micropower consumption.
560 μA
TLC074CPWPG4
TLC074CPWPG4 by Texas Instruments is a BIMOS operational amplifier with 4 functions, Vsup of +-2.25/+-8.25/4.5/16.5V, and 10000 kHz unity gain bandwidth ideal for commercial applications requiring low-bias amplification in a compact package with surface mount capability.
BIMOS
±2.25/±8.25/4.5/16.5 V
10 MHz
95 dB
3000 uV
100000
9.5 V/us
16 V/us
50 pA
17 V
0 °C (32 °F)
70 °C (158 °F)
10 mA
0.256 in (6.5 mm)
0.173 in (4.4 mm)
0.047 in (1.2 mm)
20
0.026 in (0.65 mm)
Commercial
R-PDSO-G20
HTSSOP
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch
TSSOP20,.25
TLC2202IDG4
TLC2202IDG4 by Texas Instruments is a dual operational amplifier with 1200uV max input offset voltage, 115dB CMRR, and 1V/us min slew rate. Ideal for industrial applications requiring low-bias current and high common mode rejection ratio. Package style: small outline, technology: CMOS, and power supplies range from +-2.3V to +-16V.
CMOS
±2.3/±8/4.6/16 V
1.9 MHz
115 dB
1200 uV
2.7 V/us
60 pA
150 pA
8 V
-8 V
2.6 mA
TLV341AIDCKTG4
TLV341AIDCKTG4 by Texas Instruments is a CMOS Operational Amplifier with low bias current (0.003 uA) and high common mode rejection ratio (90 dB). Ideal for automotive applications, it operates at temperatures ranging from -40 to 125 °C and has a unity gain bandwidth of 2200 kHz.
1.8/5 V
2.2 MHz
90 dB
1250 uV
560
0.9 V/us
3 nA
1.8 V
5.5 V
150 μA
0.079 in (2 mm)
0.049 in (1.25 mm)
0.043 in (1.1 mm)
6
R-PDSO-G6
TSSOP
Small Outline, Thin Profile, Shrink Pitch
TSSOP5/6,.08
TLV341IDCKTG4
TLV341IDCKTG4 by Texas Instruments is a CMOS Operational Amplifier with 4500uV Max Input Offset Voltage, 85dB Nominal CMRR, and 2200kHz Unity Gain Bandwidth. Ideal for automotive applications due to its low-bias, micropower design and wide temperature range of -40 to 125 °C.
85 dB
4500 uV
OPA3690IDG4
OPA3690IDG4 by Texas Instruments is an Operational Amplifier with 5200uV Max Input Offset Voltage, 13uA Max Average Bias Current, and 56dB Nominal CMRR. Widely used in industrial applications for its high slew rate of 500V/us and wideband technology.
3
500 MHz
56 dB
60 dB
5200 uV
794.328
500 V/us
1800 V/us
1 uA
13 uA
11 uA
6.5 V
-6.5 V
17.4 mA
0.39 in (9.9 mm)
16
R-PDSO-G16
LF411CDRG4
LF411CDRG4 by Texas Instruments is an Operational Amplifier with 2000uV Max Input Offset Voltage, 100dB Nominal CMRR, and 8V/us Min Slew Rate. Ideal for applications requiring low-bias current amplification in commercial-grade environments.
JFET
±15 V
3 MHz
100 dB
2000 uV
8 V/us
13 V/us
15 V
-15 V
3.4 mA
LMV321IDCKTG4
LMV321IDCKTG4 by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 7000 uV, Nominal Common Mode Reject Ratio of 65 dB, and Nominal Voltage of 2.7 V. It is ideal for automotive applications due to its small size, low bias current (0.25 uA), and micropower technology.
3/5 V
1 MHz
65 dB
10000
2.7 V
350 μA
5
R-PDSO-G5
LMV324IDRG4
LMV324IDRG4 by Texas Instruments is a quad operational amplifier with a max input offset voltage of 7000uV and max average bias current of 0.25uA. It is ideal for automotive applications due to its micropower technology, operating temperature range from -40 to 125 °C, and small outline package style.
50 nA
832 μA
LMV324QDG4
LMV324QDG4 by Texas Instruments is a quad operational amplifier with 7000uV max input offset voltage, 65dB nominal CMRR, and 10000 min voltage gain. Ideal for automotive applications due to its micropower feature and wide temperature range of -40 to 125 °C. Suitable for surface mount designs with small outline package style.
LMV324SIDRG4
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
1.16 mA
SOP16,.25
LMV342IDRG4
LMV342IDRG4 by Texas Instruments is a CMOS operational amplifier with low bias current (0.003 uA) and micropower feature. With a max supply voltage of 5.5 V, it's ideal for automotive applications requiring high common mode rejection ratio (86 dB) and wide temperature range (-40 to 125 °C).
2.7/5 V
86 dB
1580
400 μA
LMV344IDG4
LMV344IDG4 by Texas Instruments is a CMOS operational amplifier with low bias current (0.003 uA) and micropower feature. It operates at a wide temperature range (-40 to 125 °C) making it suitable for automotive applications. With a nominal unity gain bandwidth of 1000 kHz, it offers high performance in compact small outline package (8.65mm x 3.9mm).
800 μA
LMV358QDG4
LMV358QDG4 by Texas Instruments is a dual operational amplifier with a max input offset voltage of 7000 uV and a nominal unity gain bandwidth of 1000 kHz. It operates at temperatures ranging from -40 to 125 °C and is ideal for automotive applications due to its micropower technology and small outline package style.
440 μA
LMV710IDCKRG4
LMV710IDCKRG4 by Texas Instruments is a voltage-feedback operational amplifier with a unity gain bandwidth of 5MHz. It operates on a supply voltage range of 2.7-5V and has a low input offset voltage of 3200uV, making it ideal for industrial applications requiring precise signal amplification in compact designs. The op amp's BICMOS technology ensures high performance at temperatures ranging from -40 to 85°C, with a small outline package suitable for surface mount assembly.
BICMOS
5 MHz
3200 uV
6300
5 V/us
6 V
1.9 mA
LPV324DG4
LPV324DG4 by Texas Instruments is a quad operational amplifier with a max input offset voltage of 10000 uV, ideal for industrial applications. With a nominal voltage of 5 V and micropower technology, it offers low bias current at 0.05 uA, making it suitable for precision signal conditioning in harsh environments. This surface-mount op amp features a small outline package style and high common mode rejection ratio of 71 dB.
237 kHz
71 dB
10000 uV
0.1 V/us
60 nA
0 V
46 μA
LPV324IDG4
LPV324IDG4 by Texas Instruments is a quad operational amplifier with 11000uV max input offset voltage, 71dB nominal CMRR, and 237kHz unity gain bandwidth. Ideal for automotive applications due to its micropower technology and wide temperature range of -40 to 125°C.
11000 uV
65 nA
125 μA
LPV358DG4
LPV358DG4 by Texas Instruments is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 10000 uV and Nominal Unity Gain Bandwidth of 237 kHz. It operates at temperatures ranging from -40 to 85 °C and is ideal for industrial applications requiring micropower amplification in a small outline package.
24 μA
LPV358DRG4
LPV358DRG4 by Texas Instruments is a dual operational amplifier with 10000 uV max input offset voltage, 0.06 uA max average bias current, and 71 dB nominal CMRR. Ideal for industrial applications requiring low power consumption and high precision signal amplification in a compact package.
LPV358IDG4
LPV358IDG4 by Texas Instruments is a dual operational amplifier with a max input offset voltage of 11000 uV and a nominal common mode reject ratio of 71 dB. It operates on power supplies of 2.7/5 V, making it suitable for automotive applications requiring micropower amplification in small outline packages.
80 μA
LPV358IDRG4
LPV358IDRG4 by Texas Instruments is a dual operational amplifier with 11000 uV max input offset voltage, 71 dB nominal CMRR, and 237 kHz unity gain bandwidth. Ideal for automotive applications due to its micropower technology and wide temperature range of -40 to 125 °C. Suitable for surface mount designs with small outline package style.
LT1014DIDWG4
LT1014DIDWG4 by Texas Instruments is a micropower operational amplifier with a max input offset voltage of 1000 uV and a max average bias current of -0.038 uA. It is commonly used in industrial applications due to its high common mode reject ratio and wide temperature range.
5/±15 V
117 dB
97 dB
1000 uV
500000
0.2 V/us
0.4 V/us
2 nA
-38 nA
30 nA
22 V
-22 V
105 °C (221 °F)
2.2 mA
0.406 in (10.3 mm)
0.295 in (7.5 mm)
0.104 in (2.65 mm)
MC1458DRG4
MC1458DRG4 by Texas Instruments is a dual operational amplifier with 7500uV max input offset voltage and 90dB nominal CMRR. It operates at ±15V supplies, has 1.75mm max seated height, and is ideal for precision signal processing in commercial applications.
7500 uV
200 nA
800 nA
500 nA
5.6 mA
MC3303DG4
MC3303DG4 by Texas Instruments is a quad operational amplifier with 14 terminals and voltage feedback architecture. It features a max input offset voltage of 10000 uV, -1 uA average bias current, and 90 dB common mode reject ratio. Ideal for industrial applications requiring precise signal amplification in compact designs.
±2.5/±15/5/30 V
0.6 V/us
75 nA
-1 uA
14 V
36 V
7 mA
RC4559DG4
RC4559DG4 by Texas Instruments is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 7500uV and Nominal Common Mode Reject Ratio of 100dB. It operates on +-15V power supplies, ideal for commercial applications requiring high voltage gain and low bias current.
4 MHz
1.5 V/us
2 V/us
6.6 mA
SA5532ADG4
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
9 V/us
16 mA
TL052AIDRG4
TL052AIDRG4 by Texas Instruments is a dual operational amplifier with 4600uV max input offset voltage and 85dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85 °C, with low bias current of 0.0002uA and unity gain bandwidth of 3000 kHz.
4600 uV
20000
17.8 V/us
10 nA
6.4 mA
TL054IDRG4
TL054IDRG4 by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 8800 uV, low bias current of 0.0002 uA, and nominal voltage of +-5/+-15 V. Ideal for industrial applications requiring high common mode rejection ratio and low-bias amplification in a compact small outline package.
2.7 MHz
84 dB
8800 uV
15.4 V/us
12.8 mA
TL061IDRG4
TL061IDRG4 by Texas Instruments is an operational amplifier with a max input offset voltage of 9000 uV, ideal for industrial applications. It features low bias current (0.02 uA) and micropower technology, ensuring efficient performance in a compact package. With a nominal unity gain bandwidth of 1000 kHz, it offers precise amplification for various electronic systems.
9000 uV
4000
3.5 V/us
20 nA
250 μA
TL062ACDRG4
TL062ACDRG4 by Texas Instruments is a dual operational amplifier with 86 dB CMRR and 1.5 V/us slew rate, ideal for commercial applications. It features low bias current of 0.007 uA, micropower technology, and operates at temperatures ranging from 0 to 70 °C. The package is small outline with gull wing terminals for surface mount assembly.
7 nA
500 μA
TL062BCDG4
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TL064BCDG4
TL064BCDG4 by Texas Instruments is a quad operational amplifier with 14 terminals. It features low bias current (0.0002 uA @25C), high voltage gain (4000), and micropower technology. Ideal for applications requiring precise signal amplification in commercial temperature environments.
1 mA
TL4581DG4
TL4581DG4 by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and a Nominal Voltage of +-15 V. Ideal for applications requiring high voltage gain and precise signal amplification in commercial temperature environments.
±3/±20 V
TL5580IDG4
TL5580IDG4 by Texas Instruments is an Operational Amplifier with 2 functions, Vsup of +-15V, and Unity Gain Bandwidth of 12MHz. Ideal for industrial applications requiring a compact design and low bias current consumption. Features include high CMRR of 110dB, low input offset voltage of 2000uV, and wide operating temperature range from -40 to 85°C.
±2/±16/4/32 V
12 MHz
110 dB
22380
12 mA
TLC084IDRG4
TLC084IDRG4 by Texas Instruments is a quad operational amplifier with 110 dB CMRR and 10000 kHz unity gain bandwidth. Ideal for automotive applications, it operates at -40 to 125 °C with low bias current of 0.00005 uA. With a compact design and BIMOS technology, it offers high performance in voltage-feedback architecture.
±2.25/±8/4.5/16 V
1900 uV
700 pA
TLV2302IDGKG4
TLV2302IDGKG4 by Texas Instruments is a dual operational amplifier with 5000uV max input offset voltage and 73dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125 °C with micropower consumption of 0.0034mA. Its BICMOS technology ensures low bias current of 0.00025uA for precision performance.
±1.25/±8/2.5/16 V
5.5 kHz
73 dB
55 dB
30000
2500 V/us
250 pA
1 nA
3.4 μA
0.118 in (3 mm)
Open-Collector
S-PDSO-G8
Square
TSSOP8,.19
TLV2770IDG4
TLV2770IDG4 by Texas Instruments is an Operational Amplifier with 2700uV Max Input Offset Voltage, 82dB CMRR, and 4.7V/us Min Slew Rate. Ideal for automotive applications due to its low-bias current of 0.00006uA @25C and compact SMALL OUTLINE package style.
4.8 MHz
82 dB
2700 uV
13000
4.7 V/us
6 V/us
350 pA
7 V
2 mA
TSM102AIDG4
TSM102AIDG4 by Texas Instruments is an Operational Amplifier with 6500uV Max Input Offset Voltage, 90dB CMRR, and 1.3V/us Min Slew Rate. Ideal for industrial applications requiring high voltage gain and low bias current in a compact package.
3/30 V
2.1 MHz
6500 uV
1.3 V/us
INA271AIDG4
Texas Instruments' INA271AIDG4 is an Operational Amplifier with 2500uV Max Input Offset Voltage, 130kHz Unity Gain Bandwidth, and 100dB Min CMRR. Ideal for automotive applications due to its -40 to 125°C operating temperature range and 80V Max Common Mode Voltage.
130 kHz
80 V
2500 uV
LF412CDG4
LF412CDG4 by Texas Instruments is a BIFET operational amplifier with 3000 kHz unity gain bandwidth, 15000 min voltage gain, and 100 dB common mode reject ratio. Ideal for applications requiring low-bias current amplification in commercial temperature environments. Package style: small outline, surface mountable with dual terminals.
6.8 mA
LF412CDRG4
LF412CDRG4 by Texas Instruments is a BIFET operational amplifier with 3000 kHz unity gain bandwidth, 15000 min voltage gain, and 100 dB common mode reject ratio. Ideal for applications requiring low-bias current amplification in commercial temperature environments. Package style is small outline with dual terminals and surface mount capability.
LM318DG4
LM318DG4 by Texas Instruments is an operational amplifier with 15000uV max input offset voltage, 50 V/us min slew rate, and 100 dB nominal CMRR. Widely used in commercial applications due to its 15V nominal voltage, -20/+20V max supply limits, and compact small outline package style.
15 MHz
15000 uV
50 V/us
70 V/us
750 nA
20 V
-20 V
LM318DRG4
LM318DRG4 by Texas Instruments is an operational amplifier with a max input offset voltage of 15000 uV, ideal for precision applications. With a nominal voltage of +-15 V and min slew rate of 50 V/us, it offers high performance in signal conditioning circuits. Its compact package shape and surface mount capability make it suitable for space-constrained designs requiring fast response times.
© 2023 All rights reserved
