Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): 2 A;
Median Price
$0.931
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Element14
1+ parts
$0.898
100+ parts
$0.545
1k+ parts
$0.345
10k+ parts
$0.338
Farnell
$0.442
$0.317
$0.280
Adafruit Industries
$1.169
$1.111
-
Mouser Electronics
$1.290
$0.527
$0.389
$0.312
DigiKey
$0.538
$0.381
$0.299
Verical
$0.322
Arrow
$0.321
$0.276
Nova Conductors
$0.391
Maritex
$0.666
$0.404
$0.260
TME
$1.220
$0.467
$0.361
IBS Electronics
$0.400
$0.519
$0.975
Vyrian
NAC Semi
$0.570
Chip Stock
Kruse Electronics AG
Kruse
ComSIT Distribution GmbH
Sogenti Electronics
LittleDiode
Semi Source
Mil-Aero Solutions, Inc.
ABC Electronics Ltd.
Resion
ACDS - Activité Composants Distribution Service
Sinequanon
Euro-Tech
ECAB
Holdelec - ElecDif-Pro
Halfin
Fibra_Brandt Electronic GMBH
Whistler Technology
MISTER SPROCKETS
Semicontronic
$0.244
$0.238
$0.237
Continental Prestige Electronics
$0.383
Argo Parts USA
$0.379
Aztec Data Supply Inc.
$1.012
Advanced Electronics
Corohmni
$1.803
Microchip USA
$5.590
Perfect Parts
Lixinc
Authorized Procurement Solutions
Glotronic Ltd.
Kepictronics
GreenTree Electronics
Robosynatics
$0.884
$0.866
Lucentia Tech
Assy Fe
Standard Data Resources (Excess)
Cyclops Electronics Ltd (Excess)
Small Signal Bipolar Junction Transistors (BJT) ZTX753 attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Zetex Plc
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
ZTX753 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
PCN Assembly/Origin - Plating Site Add 24/Feb/2017
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Good-ark Electronics
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Tak Cheong Electronics Holdings
Weitronic Enterprise
SMBT3904E6327HTSA1
Infineon's SMBT3904E6327HTSA1 is a NPN BJT transistor with max. power dissipation of 0.33W, hFE of 70, and fT of 300MHz. Ideal for switching applications due to its small outline package style and max. collector-emitter voltage of 40V.
MMBT4403LT1G
MMBT4403LT1G by Onsemi is a PNP BJT transistor with max VCEsat of 0.75V, hFE of 100, and IC of 0.6A. Ideal for switching applications due to its small outline package style and high transition frequency of 200MHz. With a max operating temp of 150°C, it offers reliable performance in various electronic circuits.
2N2905A
STMicroelectronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
BC846A,215
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
BC817-25
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
2N3904TA
2N3904TA by Onsemi is a NPN BJT transistor with max. power dissipation of 0.35W, hFE of 30, and max. collector-emitter voltage of 40V. Ideal for switching applications due to its fast turn on/off times (ton: 70ns, toff: 250ns) and high transition frequency (fT: 300MHz).
BC846B
Taiwan Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
BC817-40W,135
NXP Semiconductors
BC817-40W,135 by NXP Semiconductors is a NPN BJT transistor for switching applications. It has a max VCEsat of 0.7V and min hFE of 250. With a max IC of 0.5A and operating temperature of 150°C, it is ideal for small outline surface mount designs.
BC857BLT1G
BC857BLT1G by Onsemi is a PNP BJT transistor for switching applications. With hFE of 220, VCEO of 45V, and IC of 0.1A, it operates b/w -55 to 150°C. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs.
2N3906
Weitron Technology
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Package Style (Meter): CYLINDRICAL;
MMBT2907A
National Semiconductor
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .8 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BC847CDW1T1G
BC847CDW1T1G by Onsemi is a NPN BJT with 2 elements, hFE of 420. It operates up to 150°C, VCE of 45V, and IC of 0.1A. Ideal for amplifier applications due to its small outline package and high transition frequency of 100MHz.
Diotec Semiconductor Ag
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
2N2907AUB
Silicon Transistor
2N2907AUB is a PNP silicon transistor with a max collector-emitter voltage of 60V and a max collector current of 0.6A. It is commonly used in small signal applications where low power dissipation and high DC current gain (hFE) are required.
2N3904
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
General Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
BC817-16LT1G
BC817-16LT1G by Onsemi is a NPN BJT transistor with 3 terminals and a max power dissipation of 0.3W. It has a min DC current gain of 100, operates at temperatures up to 150°C, and can handle a max collector-emitter voltage of 45V. This small outline transistor is ideal for applications requiring high frequency transitions up to 100MHz in surface mount configurations.
ULN2803AFWG(5,EL,M)
Toshiba
Toshiba's ULN2803AFWG(5,EL,M) is an NPN BJT with 8 Darlington banks. It has a hFE of 1000, VCE of 50V, and IC of 0.5A. Ideal for switching applications, this surface-mount transistor features built-in diodes and resistors in a small outline package.
2N2219A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2N5401
ZTX753
Diodes Incorporated
ZTX753 by Diodes Inc. is a PNP BJT transistor with 100V VCEO, 2A IC, and 1W power dissipation. Ideal for switching applications, it operates b/w -55°C to 200°C with hFE of 25 and fT of 140MHz. The package style is in-line with matte tin finish and single terminal position.
ZTX753STZ
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
Zetex Plc
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; Transistor Application: SWITCHING;
ZTX751
ZTX753STOA
ZTX753STOA by Zetex Plc is a PNP BJT transistor for switching applications. It has VCEsat of 0.5V, hFE of 25, and IC of 2A. With a max operating temp of 200°C, it's ideal for high-power switching circuits in various electronic devices.
ZTX753STOB
ZTX753STOB by Zetex Plc is a PNP BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 25, and IC of 2A. With a max operating temperature of 200°C, it's ideal for high-power switching circuits in various electronic devices.
ZTX751STZ
ZTX751STZ by Diodes Inc. is a PNP BJT transistor with 60V VCE, 2A IC, and 1W power dissipation. Ideal for switching applications, it has a min hFE of 40 and operates up to 200°C. Its package style is in-line with matte tin finish, suitable for various CECC standard circuits.
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; Terminal Position: SINGLE;
ZTX753Q
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2 A; Minimum DC Current Gain (hFE): 25;
ZTX753Q by Diodes Inc. is a PNP BJT transistor with max. VCE of 100V, IC of 2A, and hFE of 25. Ideal for switching applications due to its single configuration and silicon element material. Comes in an inline package style with matte tin finish, suitable for CECC standards at 140MHz fT.
ZTX753DCSM-JQR-A
Tt Electronics Plc
ZTX753DCSM-JQR-A by Tt Electronics Plc is a PNP BJT with 2 elements, hFE of 25, and max IC of 2A. Ideal for applications requiring high-speed switching in small outline packages at up to 150°C. Suitable for compact electronic devices needing a collector-emitter voltage of 100V and fT of 140MHz.
ZTX751M1TA
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; Qualification: Not Qualified;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSSO-G3;
ZTX751QSTZ
ZTX751QSTZ by Diodes Inc. is a PNP BJT with 1.5W power dissipation, 100 min hFE, and 2A max IC. Ideal for applications requiring high current amplification in a single configuration at up to 200°C operating temperature.
ZTX753M1
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 140 MHz; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): 2 A;
ZTX753M1 by Diodes Inc. is a PNP BJT transistor with hFE of 25, VCE of 100V, and IC of 2A. Ideal for switching applications due to its high transition frequency of 140MHz. Comes in a small outline package suitable for surface mount technology.
ZTX751STOA
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 2 A; Peak Reflow Temperature (C): 260;
ZTX754
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): 1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved