Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Small Signal Bipolar Transistors; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
Median Price
$0.038
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.063
100+ parts
$0.060
1k+ parts
10k+ parts
-
Element14
$0.490
$0.165
$0.096
Rochester
$0.031
$0.026
$0.023
Verical
$0.032
Future Electronics
$0.030
Arrow
EBV Elektronik
Chip1Stop
Farnell
$0.072
$0.045
Digiode
$0.024
Nova Conductors
$0.057
Chip Stock
Vyrian
VNN
Anansix
Ampacity Inc.
$0.011
Semicontronic
$0.021
$0.020
Corphita
$0.022
Argo Parts USA
$0.055
Netroflash
Corohmni
$0.061
Advanced Electronics
AZTECH Wire
$0.070
Aztec Data Supply Inc.
$1.254
Perfect Parts
Continental Prestige Electronics
$0.035
GreenTree Electronics
Eastek
Futuretech Components
Robosynatics
$0.059
Lucentia Tech
Authorized Procurement Solutions
UNI Independent Distributors
Supply Digital
Small Signal Bipolar Junction Transistors (BJT) BC817-40QAZ attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Nexperia
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Reference Standard:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
BC817-40QAZ Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Wafer Fab 01/Oct/2020
PCN Packaging - Label Chg 12/Mar/2017 All Dev Label Chgs 2/Aug/2020
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
EU2B-YS3303C
Idec
ROTARY SWITCH;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
BC547B
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
2N3904
2N3904 by Texas Instruments is a NPN BJT transistor with max. power dissipation of 0.35W, hFE of 70, and fT of 300MHz. Ideal for switching applications due to its max. collector-emitter voltage of 40V and max. collector current of 0.2A in a cylindrical package shape.
MMBT3906-7-F
Diodes Incorporated
Diodes Inc. MMBT3906-7-F is a PNP BJT transistor with 3 terminals, max power dissipation of 0.3W, and max collector-emitter voltage of 40V. Ideal for switching applications in small outline packages, it operates b/w -55 to 150°C with a transition frequency of 250MHz.
2N2907A
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .6 A; Terminal Position: BOTTOM; No. of Elements: 1;
MMBT3904LT3G
MMBT3904LT3G by Onsemi is a NPN BJT transistor with 40V VCEO, 0.2A IC, and 300MHz fT. Ideal for small signal applications in electronics due to its high transition frequency and low power dissipation of 0.3W. Its compact rectangular package with gull wing terminals makes it suitable for surface mount designs.
BCP56-16,115
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 180 MHz; Maximum Collector Current (IC): 1 A; Transistor Element Material: SILICON;
BC817-40
Yangzhou Yangjie Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Style (Meter): SMALL OUTLINE;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Maximum Power Dissipation Ambient: 1.5 W;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BC846BPN,115
NXP Semiconductors
NXP Semiconductors' BC846BPN,115 is a Small Signal BJT with NPN and PNP types. It has 2 elements for switching applications, with max power dissipation of 0.3W. Operating at up to 150°C, it features a collector-emitter voltage of 65V and transition frequency of 100MHz in a small outline package.
BC846B,235
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
Fairchild Semiconductor
2N2905A
Crimson Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
SMMUN2211LT1G
SMMUN2211LT1G by Onsemi is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, collector current of 0.1A, and DC current gain of 35. This surface mount device comes in a small outline package with Gull Wing terminals, suitable for AEC-Q101 automotive standards.
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Maximum Turn Off Time (toff): 35 ns;
JANTX2N2222AUB
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; Maximum Collector-Emitter Voltage: 50 V; No. of Elements: 1;
BC847B
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .45 W; Maximum Collector Current (IC): .1 A;
MMBT3906T-7-F
Diodes Inc. MMBT3906T-7-F is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C. Features GULL WING terminals, RECTANGULAR package shape, and SILICON transistor element material.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Transistor Element Material: SILICON;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
MJD32C
Power Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260;
PMH260UNE
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
PNE20010ER
BUK7S0R7-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NCR420Z
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
GAN041-650WSB
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn);
PMEG120G10ELR
PUSB3BB2DF
BCP53H
Small Signal Bipolar Transistors; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
LSF0102DC
Level Translators; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); JESD-609 Code: e4;
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
BUK7V4R2-40H
BCP56H
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
PMEG120G20ELR
PESD2V8R1BSF
BC817,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Maximum Time At Peak Reflow Temperature (s): 30;
BC817,215 by NXP Semiconductors is a NPN BJT transistor with VCEsat of 0.7V and hFE of 100. Ideal for switching applications, it has a max IC of 0.5A and operates at temperatures up to 150°C. With a package style of small outline, it is surface mountable with GULL WING terminals.
BC817-40LT1G
BC817-40LT1G by Onsemi is a NPN BJT with 45V VCEO, 0.5A IC, and 100MHz fT. Ideal for small signal applications in electronics due to its high hFE of 250 and compact SOT-23 package. Operating temperature range from -55°C to 150°C makes it suitable for various environments.
BC817-25W,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Shape: RECTANGULAR;
NXP Semiconductors' BC817-25W,115 is a NPN BJT transistor with VCEsat of 0.7V and hFE of 160. Ideal for switching applications, it has a max IC of 0.5A and operates up to 150°C. With a compact small outline package, it features GULL WING terminals for surface mount assembly.
BC817-40,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; JEDEC-95 Code: TO-236AB;
NXP Semiconductors' BC817-40,215 is a NPN BJT transistor with VCEsat of 0.7V and hFE of 250. Ideal for switching applications, it has a max IC of 0.5A and operates up to 150°C. The GULL WING terminal form and small outline package make it suitable for surface mount designs.
BC817-40W-7
BC817-40W-7 by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a 0.2W power dissipation in a small outline package suitable for surface mount technology.
BC817-25LT1G
BC817-25LT1G by Onsemi is a NPN BJT with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its compact SMALL OUTLINE package and high transition frequency. Suitable for surface mount designs requiring low power dissipation and moderate collector current.
BC817-25,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDSO-G3;
NXP Semiconductors' BC817-25,215 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 160, it operates at max 150°C with IC of 0.5A. Its small outline package makes it suitable for surface mount designs.
BC817-40W,115
NXP Semiconductors' BC817-40W,115 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it has a transition frequency of 100MHz making it suitable for high-speed switching circuits.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 150 Cel;
BC817-25LT3G
BC817-25LT3G by Onsemi is a NPN BJT transistor with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its 0.5A IC and 0.3W Ptot capabilities. Its GULL WING terminals and SOT package make it suitable for surface mount PCB designs.
BC817-16LT1G
BC817-16LT1G by Onsemi is a NPN BJT transistor with 3 terminals and a max power dissipation of 0.3W. It has a min DC current gain of 100, operates at temperatures up to 150°C, and can handle a max collector-emitter voltage of 45V. This small outline transistor is ideal for applications requiring high frequency transitions up to 100MHz in surface mount configurations.
BC817-40-7-F
BC817-40-7-F by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 0.5A IC, and 45V VCE. Ideal for switching applications, it has a max power dissipation of 0.31W and operates up to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
BC817-40,235
NXP Semiconductors' BC817-40,235 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it's ideal for small outline packages in surface mount configurations.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; No. of Terminals: 3;
BC817-40WT1G
BC817-40WT1G by Onsemi is a NPN BJT transistor with hFE of 40, Vce of 45V, and fT of 100MHz. Ideal for small signal applications in electronics due to its high transition frequency and low collector current rating. Its Gull Wing terminals and small outline package make it suitable for surface mount PCB designs.
Formosa Microsemi
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved