Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 28; Minimum Operating Temperature: -40 Cel; Height: 22 mm; Operating Frequency (Hz): 50Hz;
Median Price
$7.250
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Farnell
1+ parts
$6.060
100+ parts
$4.120
1k+ parts
$3.550
10k+ parts
-
DigiKey
$6.530
$5.093
Mouser Electronics
$5.650
Newark
$8.020
$6.580
Element14
$10.290
$7.450
$7.110
EMI Mains Filters 744834220 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
New Jersey Semiconductor Products
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
RSEL-2003W
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
SN8S-30P2
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 19 mm; Width (mm): 17; Height: 10.5 mm; Mounting Type: THROUGH HOLE MOUNT;
CMS1-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.8 A; Additional Features: INDUCTANCE 18 MICRO HENRY; Minimum Operating Temperature: -40 Cel; Height: 2.6 mm; Length: 9.4 mm;
FN2010-20-06
Schaffner Holding Ag
FN2010-20-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 23A rated current. It operates at temperatures from -25 to 100°C and has a max leakage current of 0.74mA. Ideal for panel mounting applications due to its compact dimensions of L64.8xB49.8xH30.3mm.
CMS1-14-R
Eaton Corporation
Eaton Corporation's CMS1-14-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 0.85A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6 mm, it comes in tape and reel packaging for convenience.
FN2410H-100-34
The Schaffner Holding Ag FN2410H-100-34 is a single-phase EMI mains filter with 520V rated voltage and 100A rated current. It has approvals from UL, CSA, and ENEC-14, suitable for applications requiring high pot of 2250V and max leakage current of 3.4mA. With DIN rail mounting and compact dimensions of L140.0xB115.0xH100.0 mm, it operates b/w -25°C to 100°C at an operating frequency of 250Hz.
RN112-0.5-02-27M
The Schaffner Holding Ag RN112-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and operating temperatures from -40°C to 100°C. Its dimensions are L17.7xB17.1xH12.6 mm, making it suitable for through-hole mounting applications in various electronic devices requiring effective EMI filtering at 50/60Hz frequencies up to 0.5A current rating.
B84112G0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
SSRH24NH-50041
KEMET Corporation's SSRH24NH-50041 is a UL approved EMI mains filter with 250V rated voltage and 5A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 25.5mm x 18mm. Ideal for single-phase EMI filtering applications.
FN2020-3-06
Schaffner Holding Ag's FN2020-3-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and a max leakage current of 0.74mA. This single-phase filter is ideal for chassis mounting applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
SSRH24NVS-40059
KEMET Corporation's SSRH24NVS-40059 is a UL approved EMI mains filter with 250V rated voltage and 4A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 20mm x 25.5mm x 31mm. Ideal for single-phase EMI filtering applications with through-hole mounting.
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
6609066-3
TE Connectivity's 6609066-3 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, 10A rated current, and 3mA max leakage current. Ideal for panel mounting applications in environments with -10 to 40°C temperature range and 50Hz operating frequency.
FN2412-32-33
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
TF0804S-01
TDK
TDK TF0804S-01 is a 1A, 50V single-phase EMI mains filter with -20 to 105°C operating range. Its compact D10.0xH6.0mm size makes it ideal for through-hole mounting applications in various electronic devices requiring effective EMI filtering.
RSEL-2005M
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 30 mm; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
6609046-7
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
SU9VF-07015
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
SCT25XV-150-1R6A010JH
KEMET's SCT25XV-150-1R6A010JH is a 1000V rated, 15A single-phase EMI mains filter with insulation resistance of 100 Mohm. Operating temperature ranges from -40°C to 150°C. Ideal for applications requiring through-hole mounting and effective EMI filtering in various electronic systems.
NEF1-10-2788977
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): UL; IEC; VDE; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved