Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP265J(TPR,E(T optocoupler has a max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation in temperatures ranging from -25 to 85°C.
Median Price
$0.364
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$0.839
100+ parts
$0.462
1k+ parts
$0.309
10k+ parts
-
TTI Europe
$0.320
Farnell
$0.276
$0.256
Element14
$0.475
$0.429
EBV Elektronik
Chip1Stop
$0.350
$0.265
$0.235
Verical
$0.378
$0.326
Chip Stock
Bristol Electronics
NAC Semi
$0.596
Nova Conductors
Ampacity Inc.
$0.272
GreenTree Electronics
Futuretech Components
iodParts Technologies Inc.
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Aranea Global
Low maximum on state voltage allows for efficient operation and helps in minimizing power consumption.
Single configuration simplifies the setup and installation process, making it user-friendly.
High peak surge current capability ensures reliable performance even during sudden surges or spikes in the electrical system.
Low maximum forward current helps in reducing heat dissipation and ensures better efficiency.
Optocoupler with TRIAC output provides a reliable and efficient way to control AC loads.
Wide operating temperature range allows for versatile use in various environments.
Low minimum operating temperature ensures the device can function even in cold conditions.
Low maximum input trigger current helps in reducing the input power requirement.
High repetitive off-state voltage ensures reliable isolation and protection against voltage spikes.
Tape packing method provides convenience in handling and storage of the product.
Low maximum reverse leakage current ensures minimal power loss during off-state operation.
High minimum peak off-state voltage ensures reliable isolation between the input and output circuits.
High maximum isolation voltage provides strong protection against electrical shocks and ensures safe operation.
Surface mount feature allows for easy and secure mounting on PCBs, saving space and facilitating mass production.
Low maximum on state current helps in reducing power consumption and heat generation during operation.
Optocoupler Trigger Device Outputs TLP265J(TPR,E(T attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Toshiba
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
TLP265J(TPR,E(T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Dev Marking Chg 1/Dec/2020
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Shanghai Lunsure Electronic Technology
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semitron
Fagor Electronica S Coop
Panjit International
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
SPC TECHNOLOGY/ MULTICOMP
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
TLP748J
Toshiba
Toshiba TLP748J is an SCR output optocoupler with max on-state voltage of 1.45V and peak surge current of 2A. Ideal for applications requiring high isolation voltage (4000V) and operating temperatures ranging from -25 to 85°C, making it suitable for industrial control systems.
TLP266J
Toshiba TLP266J is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage, operating b/w -25°C to 85°C. With a max isolation voltage of 3750V, it's suitable for surface mount applications requiring high on-state current at 0.07A.
BRT12H-X001
Vishay Intertechnology
Vishay Intertechnology's BRT12H-X001 is a single TRIAC output optocoupler with a max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, with a nominal input trigger current of 2mA. Ideal for applications requiring high-voltage isolation and reliable triggering in various electronic circuits.
MOC3011
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 5 mA;
TIL3011
TIL3011 by Texas Instruments is a single TRIAC output optocoupler with max. forward current of 0.05A and isolation voltage of 3535V. It operates b/w -40°C to 100°C, with nominal trigger current of 5mA. Ideal for applications requiring high isolation and control of AC loads up to 250V at 0.1A.
FODM3012_NF098
FODM3012_NF098 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
MOC3042TVM
MOC3042TVM by Onsemi is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It is ideal for applications requiring a triac output optocoupler with zero cross-over, such as in industrial control systems. With an isolation voltage of 7500V and operating temperature range from -40 to 85°C, it offers reliable performance in various environments.
MOC3051SVM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 15 mA; Maximum Forward Current: .06 A; Minimum Peak Off-state Voltage: 600 V;
FOD4208SV
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
MOC3083VM
The Onsemi MOC3083VM is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3020VM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Nominal Input Trigger Current: 30 mA; Maximum Input Trigger Current: .03 A;
FODM3083V
The Onsemi FODM3083V is a single TRIAC output optocoupler with max forward current of 0.06A and isolation voltage of 3750V. It operates b/w -40 to 100 °C, suitable for triggering devices in various applications like motor controls and solid-state relays.
IL410-X017
Siemens
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Nominal Input Trigger Current: 2 mA; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Minimum Peak Off-state Voltage: 600 V; Additional Features: VDE APPROVED, UL RECOGNIZED;
IL4118-X006
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .7 mA;
MOC3020
Intersil
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Peak Surge Current: 1 A; No. of Elements: 1; Maximum Isolation Voltage: 7500 V; Minimum Operating Temperature: -40 Cel;
TLP161J(TPR,U,C,F)
Toshiba's TLP161J optocoupler has a max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 2500V. Ideal for triggering devices in applications requiring high electrical isolation and low forward current consumption.
MOC3042X
Isocom Components
The Isocom Components MOC3042X is a single optocoupler with triac output, featuring a max forward current of 0.05A and isolation voltage of 5300V. With a nominal input trigger current of 10mA, it operates b/w -40°C to 100°C. Ideal for applications requiring high voltage isolation and reliable triggering in various electronic circuits.
MOC3052SVM
MOC3052SVM by Onsemi is a single TRIAC output optocoupler with max on-state voltage of 2.5V, peak surge current of 1A, and isolation voltage of 7500V. Ideal for triggering devices in applications requiring high isolation levels and operating temperatures ranging from -40 to 85°C.
FODM3022
The Onsemi FODM3022 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, with an input trigger current of 0.01A. Ideal for applications requiring high isolation voltage up to 3750V, such as in industrial control systems and power management circuits.
MOC3041SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP268J(E
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Reverse Leakage Current: .00001 A; Additional Features: UL APPROVED; Peak Surge Current: 1.2 A; No. of Elements: 1;
TLP268J(E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Repetitive Off-state Voltage (Peak): 600 V; Maximum On State Current: .07 A; Minimum Peak Off-state Voltage: 600 V; Maximum Reverse Leakage Current: .00001 A;
TLP268J(TPL,E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Peak Surge Current: 1.2 A; Minimum Operating Temperature: -25 Cel; No. of Elements: 1; Packing Method: TAPE;
TLP268J(TPL,E
Toshiba's TLP268J(TPL,E optocoupler has a peak surge current of 1.2A, max forward current of 0.0075A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and precise signal transmission with its TRIAC output configuration.
TLP268J(TPR,E
Toshiba's TLP268J(TPR,E is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for triggering devices, it features a triac output with zero cross voltage and offers high isolation voltage of 3750V. Suitable for applications requiring surface mounting in temperatures ranging from -40 to 100°C.
TLP268J
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -25 Cel; Additional Features: UL APPROVED; Configuration: SINGLE; Maximum On State Current: .07 A;
TLP268J(V4,E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Input Trigger Current: .003 A; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 85 Cel; Configuration: SINGLE;
TLP268J(T2-TPL,E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Input Trigger Current: .003 A; Minimum Peak Off-state Voltage: 600 V; Packing Method: TAPE; Minimum Operating Temperature: -25 Cel;
TLP265J(T7-TPL,E
Toshiba's TLP265J(T7-TPL,E is a TRIAC output optocoupler with max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.
TLP265J(T7-TPL,E(T
Toshiba's TLP265J(T7-TPL,E(T optocoupler features 2.8V max on-state voltage, 1.2A peak surge current, and 85°C max operating temp. Ideal for triggering devices in applications requiring high isolation voltage of 3750V, such as industrial control systems and power supplies.
TLP268J(TPR,E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Peak Surge Current: 1.2 A; Packing Method: TAPE; Additional Features: UL APPROVED; Maximum Operating Temperature: 85 Cel;
TLP266J(T7-TPL,E
Toshiba's TLP266J(T7-TPL,E optocoupler has a peak surge current of 1.2A, max forward current of 0.025A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation in temperatures ranging from -25 to 85°C.
TLP267J(TPR,E(T
TRIAC OUTPUT OPTOCOUPLER;
TLP267J(TPR,E
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Reverse Leakage Current: .00001 A; Minimum Peak Off-state Voltage: 600 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .07 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Reverse Leakage Current: .00001 A; Additional Features: UL APPROVED; Peak Surge Current: 1.2 A; Minimum Operating Temperature: -25 Cel;
TLP260J
TRIAC OUTPUT OPTOCOUPLER; Maximum Forward Current: .025 A; Minimum Peak Off-state Voltage: 600 V; Maximum Isolation Voltage: 3000 V; Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED;
TLP265J
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -25 Cel; No. of Elements: 1; Maximum Reverse Leakage Current: .00001 A; Peak Surge Current: 1.2 A;
TLP265J(TPR,E
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE; Nominal Input Trigger Current: 10 mA; Minimum Peak Off-state Voltage: 600 V; No. of Elements: 1;
TLP266J(TPL,E(T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Peak Surge Current: 1.2 A; Minimum Peak Off-state Voltage: 600 V; Repetitive Off-state Voltage (Peak): 600 V; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved