Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's 2SK3565 is a N-CHANNEL FET with 900V DS breakdown voltage, ideal for SWITCHING applications. It features 15A max pulsed drain current and 595mJ avalanche energy rating. The transistor has a single configuration with built-in diode, operating in enhancement mode.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$53.050
Component Stockers USA
$99.990
Authorized Procurement Solutions
Kepictronics
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Aranea Global
Speed Components Ltd (Excess)
Assy Fe
The plastic/epoxy material used in the package body provides good protection and insulation for the internal components, ensuring durability and reliability.
N-channel FETs typically have better conductivity and switching characteristics compared to P-channel FETs, making them a preferred choice for many applications.
The built-in diode helps with voltage spike protection and prevents damage to the circuit, making this FET suitable for high-reliability applications.
Designed for switching applications, this FET offers fast operation and efficient control of power flow, making it ideal for use in power management systems.
With a high breakdown voltage of 900 V, this FET can handle high voltage loads and is suitable for applications requiring robust performance.
The high pulsed drain current rating of 15 A allows this FET to handle short bursts of high current without overheating, making it suitable for power amplification applications.
The high avalanche energy rating of 595 mJ indicates the FET's ability to withstand voltage spikes and transient conditions, ensuring reliable performance in unpredictable environments.
Having 3 terminals allows for easy integration into existing circuit designs and provides flexibility for various connection configurations.
With a maximum drain current of 5 A, this FET can handle moderate to high power loads, making it suitable for a wide range of power management applications.
The low drain-source on resistance of 2.5 ohms minimizes power loss and heat generation during operation, ensuring efficient performance and reducing the need for additional cooling.
Power Field Effect Transistors (FET) 2SK3565 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Toshiba
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
2SK3565 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Micro Commercial Components
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
JANTX2N6796
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Operating Mode: ENHANCEMENT MODE; JESD-609 Code: e0;
SQ2362ES-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQ2362ES-T1_GE3 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 17A IDM. Ideal for applications requiring high drain current handling, such as automotive power management systems. Features include EAS of 7mJ, -55 to 175 °C operating temp range, and AEC-Q101 compliance.
IRFP460PBF
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
IRFS4010TRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 375 W; Maximum Operating Temperature: 175 Cel; Package Shape: RECTANGULAR;
IRF840PBF
Vishay Intertechnology's IRF840PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 32A IDM and 510mJ EAS ratings. The transistor operates in ENHANCEMENT MODE with 0.85 ohm RDS(on) and can handle up to 125W power dissipation.
JANTX2N6796U
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 100 V;
IRFH5004TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
FDD4685
FDD4685 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for applications requiring high power dissipation up to 69W. Featuring a max Drain Current of 40A and an Avalanche Energy Rating of 121mJ, it operates in Enhancement Mode for efficient performance in various electronic circuits.
STS4DNF60L
STMicroelectronics
STS4DNF60L by STMicroelectronics is a N-CHANNEL FET with 60V DS Breakdown Voltage, 16A IDM, and 0.065 ohm RDS(on). Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a SMALL OUTLINE package. Operating at up to 150°C, it offers high power dissipation and avalanche energy rating.
BSC011N03LSIATMA1
Infineon's BSC011N03LSIATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0015 ohm RDS(on), and 100mJ EAS rating. Its small outline package and DUAL terminal position make it suitable for various power management systems.
IPZ40N04S5L4R8ATMA1
Infineon's IPZ40N04S5L4R8ATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 160A IDM, and 0.0067 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
BSZ160N10NS3GATMA1
Infineon Technologies' BSZ160N10NS3GATMA1 is a power FET with N-channel configuration and a built-in diode. It is suitable for switching applications, offering a min DS breakdown voltage of 100V and max pulsed drain current of 160A. Its small outline package style and high operating temperature make it ideal for various electronic devices.
BSS123
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Moisture Sensitivity Level (MSL): 1;
CSD19536KTTT
CSD19536KTTT by Texas Instruments is an N-CHANNEL FET for SWITCHING applications. It features a Max Pulsed Drain Current of 400A, Min DS Breakdown Voltage of 100V, and Max Operating Temperature of 175°C. With a low on-resistance of 0.0028 ohm, this MOSFET is ideal for high-power switching circuits.
FQT5P10TF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Terminal Form: GULL WING; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDS8984
FDS8984 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 32mJ Avalanche Energy Rating. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS and BUILT-IN DIODE. This small outline transistor has a max operating temperature of 150°C and can handle up to 30A pulsed drain current.
RFD14N05LSM9A
RFD14N05LSM9A by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 14A Drain Current, and 0.1 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operating at up to 175°C, it features GULL WING terminals in a RECTANGULAR package.
FDT434P
FDT434P by Onsemi is a P-CHANNEL Power FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 6A Drain Current, 0.05 ohm On Resistance, and operates in ENHANCEMENT MODE. With a max power dissipation of 3W and operating temperature up to 150°C, it's suitable for various electronic designs.
IRF840SPBF
Vishay Intertechnology's IRF840SPBF is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 510mJ EAS, and 0.85 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 125W and can withstand up to 150°C.
DMN6068SE-13
Diodes Incorporated
DMN6068SE-13 by Diodes Inc. is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode, 20.8A max pulsed drain current, and 0.068 ohm max drain-source resistance. Suitable for enhancement mode operation in small outline packages at up to 150°C operating temperature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SK3878
Toshiba
Toshiba's 2SK3878 is a N-CHANNEL FET with 900V DS breakdown voltage, ideal for SWITCHING applications. Features include 27A IDM, 778mJ EAS, and 150W power dissipation. Its METAL-OXIDE SEMICONDUCTOR technology ensures reliable performance in ENHANCEMENT MODE operation at up to 150°C.
2SK3878(F)
Toshiba's 2SK3878(F) is a N-CHANNEL Power FET with 9A max drain current and 150W power dissipation. Ideal for applications requiring high power handling in enhancement mode operation, such as power supplies and motor control systems.
2SK3868
Toshiba's 2SK3868 is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A IDM and 180mJ EAS, operating in ENHANCEMENT MODE. The transistor has a max power dissipation of 35W and an on-resistance of 1.7 ohm, suitable for high-power circuit designs.
2SK3920-01
Fuji Electric
Fuji Electric's 2SK3920-01 is a N-channel power FET with 120V DS breakdown voltage, ideal for switching applications. It features a max IDM of 268A and EAS of 719.1mJ, operating in enhancement mode at up to 150°C. The transistor has a single configuration with built-in diode and can handle a max ID of 67A.
2SK3667
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 45 W; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
2SK3569
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Avalanche Energy Rating (EAS): 363 mJ; Transistor Element Material: SILICON; Qualification: Not Qualified;
2SK3497(F)
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 130 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 150 Cel;
2SK3176(F)
Power Field-Effect Transistors;
2SK3176
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Drain Current (ID): 30 A; Package Style (Meter): FLANGE MOUNT;
2SK3050TL
ROHM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Package Shape: RECTANGULAR; Terminal Finish: TIN COPPER;
2SK3397
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 30 V;
2SK3476(TE12L,Q)
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): 3 A;
2SK3756(TE12L,F)
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain Current (ID): 1 A; Maximum Operating Temperature: 150 Cel;
2SK385
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain-Source On Resistance: .6 ohm; Case Connection: DRAIN; No. of Elements: 1;
2SK3466(TE24L,Q)
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (ID): 5 A;
2SK3473
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 900 V;
2SK3662
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 35 W; Package Style (Meter): FLANGE MOUNT; Transistor Application: SWITCHING;
2SK3767
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Case Connection: ISOLATED; Transistor Element Material: SILICON;
2SK3279TP-FA
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
2SK3550-01R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved