Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TISP7082F3SL by Texas Instruments is a 3-element surge protector with 5A peak current, 82V breakdown voltage, and UL recognition. It is used for surge protection in applications requiring a thyristor-based trigger device, such as telecommunications equipment and industrial electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$3.534
$328.203
$3.181
DigiPath Technology Company
$3.892
$3.580
ChromeModa Solutions
$3.971
$3.256
IDEA Electronic Components Group
$3.574
AZTECH Wire
$14.146
Ampacity Inc.
$16.100
Semicontronic
$17.100
$16.672
$16.587
One Stop Electronics
$20.100
Corphita
Corohmni
Assy Fe
The plastic/epoxy package body material provides durability and protection for the surge protector, ensuring a longer lifespan.
Delta connected configuration with 3 elements enhances the efficiency and reliability of the surge protector in diverting surges away from sensitive equipment.
With a non repetitive peak on-state current of 5 A, this surge protector can handle sudden high currents during surge events, effectively protecting connected devices.
Rectangular package shape allows for easy installation and integration into various electronic devices and systems.
Through-hole terminal form provides secure and reliable connections, minimizing the risk of disconnection during surge events.
Having 3 elements allows for better surge protection performance and higher reliability in safeguarding equipment against voltage spikes.
With 3 terminals, this surge protector offers easy connectivity and installation in electronic circuits.
The in-line package style makes it convenient to incorporate the surge protector into existing systems and circuits without taking up much space.
The maximum DC off-state voltage of 66 V ensures reliable protection for electronic devices against various types of voltage fluctuations and surges.
The thyristor surge protector is known for its fast response time and high surge handling capability, making it an ideal choice for protecting sensitive equipment.
Single terminal position simplifies the installation process and ensures a secure connection for effective surge protection.
With a maximum breakdown voltage of 82 V, this surge protector can effectively handle voltage spikes above this threshold, safeguarding connected devices.
Being UL recognized assures the quality and safety of the surge protector, meeting industry standards for surge protection devices.
Silicon Surge Protectors TISP7082F3SL attributes and parameters. Explore more Silicon Surge Protectors devices from Texas Instruments
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TISP7082F3SL Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Hitano Enterprise
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Rugao Dachang Electronic
TISP4290F3D
TISP4290F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 220V voltage, and 150°C max temp. Ideal for protecting circuits in electronics from voltage spikes. Suitable for surface mount applications due to its gull wing terminals and small outline package style.
TISP4165M3LMR
TISP4165M3LMR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 165V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
SMP100LC-270
STMicroelectronics
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
2N4990
Harris Semiconductor
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum Breakdown Voltage: 9 V; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Breakdown Voltage: 7 V;
TISP4265H3BJ
TISP4265H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 200V DC voltage, and 265V breakdown voltage. It is a thyristor surge protector for applications requiring protection against electrical surges. Suitable for surface mount installations in various electronic devices.
TPA120
STMicroelectronics' TPA120 is a single silicon surge protector with 16A non-repetitive peak current and 120V repetitive reverse voltage. It features a plastic/epoxy body, wire terminals, and operates b/w -55 °C to 150°C. Ideal for applications requiring isolated case connections in protecting against surges.
TISP4145H3BJR
TISP4145H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 120V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection technology.
TBU-CA065-500-WH
Bourns
SILICON SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1;
TISP2082F3SL
TISP2082F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a max breakdown voltage of 82V and can handle a non-repetitive peak on-state current of 6A. Ideal for applications requiring protection against surges in electronic circuits.
TISP7080H3SL
TISP7080H3SL by Texas Instruments is a THYRISTOR SURGE PROTECTOR with 3 DELTA CONNECTED elements. It has a Max Breakdown Voltage of 80V and Non Repetitive Peak On-state Current of 60A. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4015L1BJR-S
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
NP2600SBT3G
The Onsemi NP2600SBT3G is a single silicon surge protector with a max breakdown voltage of 300V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against voltage surges. With UL recognition, this thyristor surge protector is ideal for surface mount installations in electronic devices.
TISP3082F3P
TISP3082F3P by Texas Instruments is a Silicon Surge Protector with 6A Non Repetitive Peak On-state Current and 82V Max Breakdown Voltage. It features SERIES CONNECTED, CENTER TAP configuration for surge protection applications. The device has 8 terminals in an IN-LINE package style suitable for UL RECOGNIZED standards.
SMP30-130
STMicroelectronics SMP30-130 is a single silicon surge protector with 14A non-repetitive peak on-state current. It has a max breakdown voltage of 173V, suitable for surface mount applications in protecting electronic devices from voltage surges.
TISP7165H3SL
TISP7165H3SL by Texas Instruments is a THYRISTOR SURGE PROTECTOR with 60A Non Repetitive Peak On-state Current, 165V Max Breakdown Voltage, and 150°C Max Operating Temperature. It is used for surge protection in various applications like telecommunications equipment and industrial machinery.
TISP4150F3LM
TISP4150F3LM by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max DC off-state voltage of 120V and operates b/w -40°C to 150°C. This thyristor surge protector is used for protecting electronic devices from voltage spikes in various applications.
TISP7150F3D
TISP7150F3D by Texas Instruments is a silicon surge protector with 4.3A peak current, 120V DC off-state voltage, and 150V breakdown voltage. It is a thyristor surge protector in a small outline package, suitable for surface mount applications requiring reliable overvoltage protection.
TISP7145H3SL
TISP7145H3SL by Texas Instruments is a silicon surge protector with 60A non-repetitive peak on-state current. It features a thyristor surge protector trigger device and can operate b/w -40°C to 150°C. Ideal for applications requiring protection against voltage surges in electronic circuits.
TISP2180L
TISP2180L by Texas Instruments is a silicon surge protector with 3 delta-connected elements, 10A non-repetitive peak on-state current, and 180V max breakdown voltage. It is used for surge protection in various applications due to its through-hole terminal form and rectangular package shape.
TPA130A-18
STMicroelectronics TPA130A-18 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package, matte tin terminal finish, and 173V max breakdown voltage. Ideal for surge protection in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TISP4240M3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
TISP4400T3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP4P020L1NR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
TISP4015L1AJR-S
Bourns TISP4015L1AJR-S is a single silicon surge protector with 22A peak current, ideal for surface mount applications. Featuring 8V DC off-state voltage and 15V breakdown voltage, it offers protection against transient surges. With UL recognition, this thyristor surge protector in a small outline package is suitable for various electronic devices.
TISP4070M3AJR-S
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
TISP4070M3AJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4070M3BJR-S
Bourns TISP4070M3BJR-S is a single silicon surge protector with 32A peak current, ideal for protecting circuits. With a max breakdown voltage of 70V and operating temperature range from -40 to 150°C, it ensures reliable performance. This surface-mount device in small outline package suits various applications requiring transient voltage suppression.
TISP4070H3BJR-S
Bourns TISP4070H3BJR-S is a single silicon surge protector with 60A peak current, 58V max voltage, and -40 to 150°C operating range. Ideal for protecting circuits from transient overvoltage events in various applications.
TISP4040H1BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
TISP4082F3SL
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Breakdown Voltage: 82 V;
TISP4250J3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
TISP4265M3BJR-S
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
TISP4395J3BJR-S
TISP4350H3BJR-S
TISP2082F3D
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: DELTA CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 82 V;
TISP1082F3P
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved