Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TISP2082F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a max breakdown voltage of 82V and can handle a non-repetitive peak on-state current of 6A. Ideal for applications requiring protection against surges in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Parana Technologies
$2.305
$2.804
DigiPath Technology Company
$2.538
$2.335
ChromeModa Solutions
$2.590
$2.124
IDEA Electronic Components Group
$2.331
AZTECH Wire
$6.079
Ampacity Inc.
$10.100
One Stop Electronics
$14.100
Semicontronic
$23.100
$22.522
$22.407
Corphita
Corohmni
The use of plastic/epoxy material provides durability and protection against environmental factors, making the surge protector suitable for various applications.
The delta connected configuration with 3 elements enhances the efficiency and performance of the surge protector in suppressing surges and protecting connected devices.
With a high maximum breakdown voltage of 82 V, this surge protector can effectively handle and suppress surges, providing reliable protection to connected equipment.
The use of silicon surge protector as the trigger device ensures fast response and efficient surge protection, safeguarding devices from potential damage.
Silicon Surge Protectors TISP2082F3SL attributes and parameters. Explore more Silicon Surge Protectors devices from Texas Instruments
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TISP2082F3SL Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3203F
Idec
ROTARY SWITCH;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NXP Semiconductors
Sensitron Semiconductor
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
NP2600SCMCT3G
Onsemi
NP2600SCMCT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 220V and max breakdown voltage of 300V. It operates b/w -55 °C to 150°C, making it suitable for protecting electronic devices from power surges in various applications. This surface-mount device features a thyristor surge protector configuration and is UL recognized.
TISP4360H4BJR
Texas Instruments
TISP4360H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a plastic/epoxy package body, surface mount capability, and a max breakdown voltage of 360V. Ideal for protecting electronic circuits from voltage surges in various applications.
TISP4265H4BJR
TISP4265H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 265V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage surges in various applications.
TISP3115H3SL
TISP3115H3SL by Texas Instruments is a silicon surge protector with 60A peak current, 90V off-state voltage, and 115V breakdown voltage. It is used for surge protection in various applications due to its thyristor trigger device type and series-connected configuration.
NTVB300SB-L
NTVB300SB-L by Onsemi is a single silicon surge protector with a max breakdown voltage of 400V. It has a trigger device type and operates b/w -40 °C to 150°C. Ideal for surface mount applications in protecting electronic devices from voltage surges.
NP1100SAT3G
NP1100SAT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 90V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring UL recognized surge protection in small outline packages.
TISP7072F3SL
TISP7072F3SL by Texas Instruments is a 3-element surge protector with 5A peak current and 72V breakdown voltage. It features a thyristor trigger device, suitable for protecting against surges in electronic circuits. The package is rectangular with through-hole terminals, ideal for inline applications requiring UL recognized standards compliance.
TISP4070M3LMR
TISP4070M3LMR by Texas Instruments is a single silicon surge protector with 32A non-repetitive peak on-state current. It operates b/w -40°C to 150°C, has a max breakdown voltage of 70V, and is UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP4080H3LP
TISP4080H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 80V max breakdown voltage. It features a cylindrical package style and wire terminal form, making it ideal for protecting electronic devices from power surges in various applications.
TISP7125F3D
TISP7125F3D by Texas Instruments is a silicon surge protector with 4.3A peak current, 100V DC off-state voltage, and 125V breakdown voltage. It features a delta connected configuration with 3 elements and is ideal for protecting electronic devices from power surges in various applications.
SP723AP
Littelfuse
SP723AP by Littelfuse is a complex silicon surge protector with 6 elements and 8 terminals. It has a max operating temperature of 105°C and min of -40°C, making it suitable for protecting electronic devices from power surges in various applications. The package style is in-line with a rectangular shape and through-hole terminals.
TISP3145H3SL
TISP3145H3SL by Texas Instruments is a Silicon Surge Protector with 60A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 2 elements. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4360H3BJR
TISP4360H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 290V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and small outline package.
TISP4220M3LM
TISP4220M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 220V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
SMTPA100
STMicroelectronics' SMTPA100 is a silicon surge protector with 16A non-repetitive peak on-state current and 100V repetitive peak reverse voltage. It is a surface-mount device in a rectangular package, ideal for protecting electronic circuits from voltage spikes in various applications.
TISP2240F3D
TISP2240F3D by Texas Instruments is a Silicon Surge Protector with 3 elements in a delta configuration. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 240V. Ideal for protecting circuits from voltage spikes, it features gull wing terminals and is UL recognized for reliable performance.
TISP4300H3LM
TISP4300H3LM by Texas Instruments is a single silicon surge protector with 60A peak current and 230V DC voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. Operating temperature ranges from -40°C to 150°C, making it ideal for various industrial settings.
TISP4070M3LM
TISP4070M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 70V. Ideal for UL-recognized applications requiring thyristor surge protection in through-hole configurations.
TISP4350H3LMFR
TISP4350H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current, 275V DC voltage, and 150°C max temperature. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protector design.
NP2600GARLG
NP2600GARLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max DC off-state voltage of 220V and a max breakdown voltage of 300V. This thyristor surge protector is UL recognized and commonly used for isolating case connections in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TISP4240M3BJR-S
Bourns
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
TISP4400T3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP4P020L1NR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
TISP4015L1AJR-S
Bourns TISP4015L1AJR-S is a single silicon surge protector with 22A peak current, ideal for surface mount applications. Featuring 8V DC off-state voltage and 15V breakdown voltage, it offers protection against transient surges. With UL recognition, this thyristor surge protector in a small outline package is suitable for various electronic devices.
TISP4070M3AJR-S
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
TISP4070M3AJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4070M3BJR-S
Bourns TISP4070M3BJR-S is a single silicon surge protector with 32A peak current, ideal for protecting circuits. With a max breakdown voltage of 70V and operating temperature range from -40 to 150°C, it ensures reliable performance. This surface-mount device in small outline package suits various applications requiring transient voltage suppression.
TISP4015L1BJR-S
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
TISP4070H3BJR-S
Bourns TISP4070H3BJR-S is a single silicon surge protector with 60A peak current, 58V max voltage, and -40 to 150°C operating range. Ideal for protecting circuits from transient overvoltage events in various applications.
TISP4040H1BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
TISP4082F3SL
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Breakdown Voltage: 82 V;
TISP4250J3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
TISP4265M3BJR-S
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
TISP4395J3BJR-S
TISP4350H3BJR-S
TISP2082F3D
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: DELTA CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 82 V;
TISP1082F3P
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved