Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Texas Instruments MPC508APG4 is an 8-channel single-ended multiplexer with a max on-state resistance of 1500 ohm and switching voltage of +-15 V. It is designed for industrial applications, featuring a package style of IN-LINE and operating temperatures ranging from -40 to 85 °C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
One Stop Electronics
$0.500
Semicontronic
$0.488
$0.485
Ampacity Inc.
$5.500
AZTECH Wire
$17.960
Parana Technologies
$18.438
$1,712.260
$16.594
DigiPath Technology Company
$20.303
ChromeModa Solutions
$20.717
$16.988
IDEA Electronic Components Group
$19.681
$18.645
Component Stockers USA
$99.990
Corphita
Corohmni
Perfect Parts
The use of plastic/epoxy material ensures durability and resistance to temperature variations, making this product suitable for industrial applications.
Operates efficiently at a nominal supply voltage of 15V, providing stable performance.
Offers 8 channels, allowing for versatile and flexible signal routing options.
Utilizes CMOS technology for low power consumption and high noise immunity, enhancing reliability.
With a low on-state resistance of 1500 ohm, this product minimizes signal loss and distortion.
Multiplexers & Switches MPC508APG4 attributes and parameters. Explore more Multiplexers & Switches devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MPC508APG4 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MAX4784ETE-T
MAX4784ETE-T by Maxim Integrated is a CMOS multiplexer with 2 channels, 4 functions, and 3 ohm max on-state resistance. Operating at -40 to 85 °C, it has a supply voltage range of 1.6-3.6 V ideal for industrial applications requiring fast switching with low power consumption.
ADG419BRMZ-REEL7
Analog Devices
ADG419BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. Operating at -40 to 85 °C, it has a peak reflow temperature of 260 C and offers 80 dB off-state isolation. Ideal for industrial applications requiring fast switching times and high reliability in compact designs.
FSA221L10X
FSA221L10X by Onsemi is a 10-terminal DPDT chip carrier switch with 3.3V nominal voltage and 5 ohm max on-state resistance. It operates in industrial temperature range, has separate outputs, and offers 37dB off-state isolation. Ideal for applications requiring high-speed switching in compact designs.
ADG1206YRUZ
ADG1206YRUZ by Analog Devices is a CMOS single-ended multiplexer with 16 channels. It operates at a nominal voltage of 15V and has a max on-state resistance of 200 ohm. This automotive-grade switch is ideal for applications requiring high off-state isolation and fast switching times.
CD74HC4067M96
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1413YCPZ-REEL7
ADG1413YCPZ-REEL7 by Analog Devices is a 4-function multiplexer & switch with a square package shape. It operates at a nominal voltage of 5V and has a max operating temperature of 125°C. This IC is suitable for automotive applications due to its temperature grade and moisture sensitivity level.
MAX4565EWP+
MAX4565EWP+ by Analog Devices is a 4-function audio/video switch with 60 ohm Ron, 150 ns switch-on time, and 100 ns switch-off time. It operates b/w -40 to 85 °C and has a terminal pitch of 1.27 mm. Ideal for industrial applications requiring high isolation and low resistance match.
MAX14778ETP+T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ADG1606BRUZ-REEL7
ADG1606BRUZ-REEL7 by Analog Devices is a 16-channel CMOS multiplexer with 5V supply voltage, -40 to 125 °C operating temperature range. It features a max on-state resistance of 7.5 ohm and common output. Ideal for automotive applications due to its small outline package and high isolation of 62 dB.
74HC4051D-T
NXP Semiconductors
NXP Semiconductors' 74HC4051D-T is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a nominal off-state isolation of 50dB and a max on-state resistance of 180 ohm. Ideal for automotive applications, this small outline package switch has a peak reflow temperature of 260°C and operates b/w -40 to 125°C.
MC14052BDG
MC14052BDG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact small outline package.
FSA2257MUX
FSA2257MUX by Onsemi is a CMOS SPDT multiplexer with 2 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and nominal off-state isolation of 70 dB. Ideal for industrial applications requiring separate outputs and a supply voltage range of 1.65V to 5.5V in a small outline package with dual terminals.
ADG439FBRZ-REEL
ADG439FBRZ-REEL by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125 °C and has a max on-state resistance of 270 ohm. With a package size of 9.9mm x 3.9mm, it is ideal for automotive applications requiring precise signal switching.
ADG719BRTZ-REEL
ADG719BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a voltage range of 1.8V to 5.5V. It features a max on-state resistance of 12 ohm and offers high off-state isolation of 67 dB. Ideal for automotive applications due to its CMOS technology and compact design with low profile package style.
SN74LVC1G66DCKRE4
Texas Instruments
SN74LVC1G66DCKRE4 by Texas Instruments is a SPST switch with 5 terminals, operating at 2.3V to 5.5V. It offers a max on-state resistance of 20 ohm and fast switching times of 6.5 ns on and 6.9 ns off, suitable for industrial applications requiring low power consumption and high bandwidth up to 300 kHz.
DG508ACJ
Vishay Intertechnology
Vishay Intertechnology's DG508ACJ is an 8-channel CMOS multiplexer with a max on-state resistance of 450 ohm and max switch-on time of 1500 ns. It operates at temperatures b/w 0 to 70 °C and has a supply current of up to 2.4 mA. Ideal for applications requiring high-speed signal switching in commercial-grade environments.
MC74HC4051ADTR2G
MC74HC4051ADTR2G by Onsemi is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This IC is commonly used in applications requiring signal switching and multiplexing.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BMT
CD4066BMT by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm max on-state resistance, and 40 kHz nominal bandwidth. It operates at -55 to 125 °C, has a peak reflow temp of 260 C, and is suitable for military-grade applications requiring low power consumption and fast switching speeds.
SN74LVC2G66DCTR
SN74LVC2G66DCTR by Texas Instruments is a CMOS SPST switch with 2 channels, low on-state resistance (30 ohm), and fast switching times (5.6 ns on, 6.9 ns off). It operates at industrial temperatures (-40 to 85°C) and has a wide supply voltage range of 1.65V to 5.5V, making it ideal for high-speed signal routing in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
MPC508AU
The Texas Instruments MPC508AU is a CMOS single-ended multiplexer with 8 channels, operating at temperatures ranging from -40 to 85°C. It features a max on-state resistance of 1500 ohm and common output voltage. Ideal for industrial applications requiring a compact rectangular package with surface mount capabilities.
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC508AUG4
The Texas Instruments MPC508AUG4 is a CMOS single-ended multiplexer with 8 channels, operating at industrial temperature grade. It features a max on-state resistance of 1500 ohm and common output voltage. With a package size of 10.3mm x 7.5mm x 2.65mm, it is ideal for applications requiring fast switching times and high isolation levels in industrial settings.
MPC508AU/1K
The Texas Instruments MPC508AU/1K is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of +-15V and has a max on-state resistance of 1500 ohm. This industrial-grade device, with its small outline package style, is commonly used in applications requiring signal switching and isolation.
MPC508AU/1KG4
The Texas Instruments MPC508AU/1KG4 is an 8-channel CMOS multiplexer with a max on-state resistance of 1500 ohm and common output. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring fast switching times of 500 ns. The small outline package with gull wing terminals ensures easy surface mount installation in compact spaces.
MPC506AUG4
The Texas Instruments MPC506AUG4 is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 1800 ohm. Ideal for industrial applications requiring common output switching with a supply current of up to 1.5 mA.
MPC506AU/1K
The Texas Instruments MPC506AU/1K is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at industrial temperature grades, with a max supply current of 1.5mA and nominal voltage of +-15V. Ideal for applications requiring common output, it offers fast switching times and high off-state isolation.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC506AU
The Texas Instruments MPC506AU is a single-ended multiplexer with 1 channel and a max on-state resistance of 1800 ohm. It operates at temperatures ranging from -40 to 85 °C and has a small outline package style. This multiplexer is commonly used in industrial applications requiring CMOS technology and a supply voltage of +-15 V.
MPC506AU/1KG4
The Texas Instruments MPC506AU/1KG4 is a CMOS single-ended multiplexer with 16 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 1500 ohm. This small outline package switch is ideal for industrial applications requiring high isolation and fast switching times.
MPC509AU/1K
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC509AU/1KG4
MPC507AP
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC506APG4
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC507APG4
MPC507AU
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC508AP
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved