Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Texas Instruments MPC507AU is a CMOS differential multiplexer with 2 channels, operating at industrial temperature grade. It features a max on-state resistance of 1800 ohm and common output voltage. Ideal for applications requiring high-speed switching with low power consumption in compact designs.
Median Price
$17.882
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Rochester
1+ parts
$9.850
100+ parts
$9.650
1k+ parts
$9.460
10k+ parts
-
Chip1Stop
$12.500
Texas Instruments
$15.348
$13.407
$9.246
RS (Exports)
$20.415
$15.305
Verical
$22.844
$16.796
$15.687
Mouser Electronics
$26.990
$19.350
$18.250
DigiKey
$18.967
$17.863
Arrow
$13.268
$12.306
Digiode
$12.198
Vyrian
$12.700
Chip Stock
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Digital Electronic Gebert Verwaltungs UG
LWI Electronics Inc
Mil-Aero Solutions, Inc.
PC Components Company LLC
Euro-Tech
Bristol Electronics
One Stop Electronics
$10.910
Corphita
$11.556
Parana Technologies
$19.065
$19.118
DigiPath Technology Company
$20.993
$19.313
ChromeModa Solutions
$21.421
$17.565
IDEA Electronic Components Group
$20.350
$19.279
Microchip USA
$54.910
$54.120
$53.730
$53.340
A-Z Elektronik GmbH
Lixinc
Authorized Procurement Solutions
Glotronic Ltd.
Assy Fe
Kepictronics
Perfect Parts
GreenTree Electronics
A-Plus Industry Inc.
This material is lightweight and durable, making the product suitable for various applications.
Ease of installation and space-saving design.
Compatible with standard power supply voltages.
Allows for multiple connections and flexibility in circuit design.
Can operate efficiently in a wide range of temperature environments.
Low power consumption and high noise immunity, ideal for digital circuits.
Provides low resistance for efficient signal transmission.
Prevents short circuits by ensuring the previous connection is broken before a new one is made.
Multiplexers & Switches MPC507AU attributes and parameters. Explore more Multiplexers & Switches devices from Texas Instruments
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Nominal Negative Supply Voltage (Vsup):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MPC507AU Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
EU2B-YS3203F
Idec
ROTARY SWITCH;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Gec Plessey Semiconductors
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Pulse Electronics
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MAX399ESE+
MAX399ESE+ by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at industrial temperature grade, with on-state resistance of 100 ohm and off-state isolation of 75 dB. Ideal for applications requiring fast switching times and precise signal routing in compact designs.
ADG408BRZ
ADG408BRZ by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It operates in industrial temperature range, making it suitable for applications requiring precise signal routing in harsh environments.
ADG601BRTZ-REEL
ADG601BRTZ-REEL by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 2.5 ohm and switching time of 120 ns. Ideal for industrial applications requiring low-profile switches with high isolation and fast response times.
MAX4053ACPE
Maxim Integrated
MAX4053ACPE by Maxim Integrated is a 16-terminal SPDT multiplexer with 3 functions, operating at 5V. It features a max on-state resistance of 100 ohm and switching time of 175 ns. Ideal for applications requiring high-speed signal routing in commercial temperature environments.
CD4052BPWRE4
CD4052BPWRE4 by Texas Instruments is a CMOS differential multiplexer with 4 channels. It operates at temperatures ranging from -55 to 125°C and has a max supply voltage of 20V. With a package size of 5x4.4mm, it is suitable for military-grade applications requiring low power consumption and high on-state resistance match.
CD4053BE
CD4053BE by Texas Instruments is a 3-channel CMOS multiplexer with 16 terminals. It operates at a supply voltage range of 3-20V and offers a max on-state resistance of 1050 ohm. Ideal for military-grade applications, it has a bandwidth of 30 kHz and features break-before-make switching for seamless performance.
74HC4051D
NXP Semiconductors
NXP Semiconductors' 74HC4051D is an 8-channel CMOS multiplexer with a max on-state resistance of 180 ohm and switching type of BREAK-BEFORE-MAKE. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications requiring high isolation (50 dB) and low signal current (0.025 A).
ADG708BRUZ-REEL
ADG708BRUZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 125°C, with a max on-state resistance of 4.5 ohm and common output. Ideal for automotive applications due to its small size (5x4.4mm) and low supply current (0.001mA).
DG411DYZ
Intersil
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4053PWRG4
CD74HC4053PWRG4 by Texas Instruments is a CMOS technology-based multiplexer with 3 channels, offering a max bandwidth of 180 kHz. It operates within a temperature range of -55 to 125 °C and has a low on-state resistance of 130 ohm. Ideal for applications requiring signal switching in military-grade environments.
ADG1407BRUZ-REEL7
ADG1407BRUZ-REEL7 by Analog Devices is an 8-channel CMOS differential multiplexer with a max on-state resistance of 25 ohm. It operates at a nominal voltage of 5V and can handle power supplies ranging from +-15V to +-5V. With a small outline package style, it is ideal for automotive applications requiring precise signal switching in tight spaces.
7705201EA
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FSA5157P6X
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4564EKA+T
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G66DBVR
SN74LVC1G66DBVR by Texas Instruments is a SPST switch with 5 terminals, operating at 2.3V to 5.5V. It offers low on-state resistance of 20 ohm and fast switching times of 6.5ns on and 6.9ns off, suitable for industrial applications requiring high-speed signal routing in compact spaces.
CD74HC4051MM96EP
CD74HC4051MM96EP by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures ranging from -55 to 125 °C and has a max on-state resistance of 130 ohm. Ideal for military-grade applications, it offers a nominal bandwidth of 180 kHz and features break-before-make switching technology.
SN74LVC2G66DCUR
SN74LVC2G66DCUR by Texas Instruments is a CMOS SPST switch with 2 channels, 30 ohm Ron, and 5.6 ns switch-on time. It operates at -40 to 85°C, has a supply voltage range of 1.65-5.5 V, and is ideal for industrial applications requiring low on-state resistance and fast switching speeds.
DG412DY-T1-E3
Vishay Intertechnology's DG412DY-T1-E3 is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 35 ohm max on-state resistance. It has separate outputs, 220 ns switch-on time, and is ideal for industrial applications requiring high isolation (68 dB) and break-before-make switching.
DG413DYZ-T
Renesas Electronics
Renesas Electronics' DG413DYZ-T is a CMOS SPST switch with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and has a max supply voltage of 20 V. Ideal for industrial applications requiring high isolation and fast switching times.
74LVC1G3157GW
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MPC508AU
The Texas Instruments MPC508AU is a CMOS single-ended multiplexer with 8 channels, operating at temperatures ranging from -40 to 85°C. It features a max on-state resistance of 1500 ohm and common output voltage. Ideal for industrial applications requiring a compact rectangular package with surface mount capabilities.
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC508AUG4
The Texas Instruments MPC508AUG4 is a CMOS single-ended multiplexer with 8 channels, operating at industrial temperature grade. It features a max on-state resistance of 1500 ohm and common output voltage. With a package size of 10.3mm x 7.5mm x 2.65mm, it is ideal for applications requiring fast switching times and high isolation levels in industrial settings.
MPC508AU/1K
The Texas Instruments MPC508AU/1K is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of +-15V and has a max on-state resistance of 1500 ohm. This industrial-grade device, with its small outline package style, is commonly used in applications requiring signal switching and isolation.
MPC508AU/1KG4
The Texas Instruments MPC508AU/1KG4 is an 8-channel CMOS multiplexer with a max on-state resistance of 1500 ohm and common output. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring fast switching times of 500 ns. The small outline package with gull wing terminals ensures easy surface mount installation in compact spaces.
MPC506AUG4
The Texas Instruments MPC506AUG4 is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 1800 ohm. Ideal for industrial applications requiring common output switching with a supply current of up to 1.5 mA.
MPC506AU/1K
The Texas Instruments MPC506AU/1K is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at industrial temperature grades, with a max supply current of 1.5mA and nominal voltage of +-15V. Ideal for applications requiring common output, it offers fast switching times and high off-state isolation.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC506AU
The Texas Instruments MPC506AU is a single-ended multiplexer with 1 channel and a max on-state resistance of 1800 ohm. It operates at temperatures ranging from -40 to 85 °C and has a small outline package style. This multiplexer is commonly used in industrial applications requiring CMOS technology and a supply voltage of +-15 V.
MPC506AU/1KG4
The Texas Instruments MPC506AU/1KG4 is a CMOS single-ended multiplexer with 16 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 1500 ohm. This small outline package switch is ideal for industrial applications requiring high isolation and fast switching times.
MPC509AU/1K
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC509AU/1KG4
MPC508APG4
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC507AP
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC506APG4
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC507APG4
MPC507AU/1K
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved