Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CDCV855IPWR clock driver by Texas Instruments operates at 2.5V, with 4.5ns propagation delay and 12A max I (ol). It is used in industrial applications requiring a small outline package with differential input conditioning and 3-state output characteristics.
Median Price
$4.024
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.170
100+ parts
$3.970
1k+ parts
$3.630
10k+ parts
$3.580
Avnet
-
$1.877
Vyrian
$2.040
Digiode
Prism Electronics
Native Components
$0.231
$0.222
Northwest PG Solutions
$0.254
$0.224
Andel Nordic
$8.228
$7.899
Microchip USA
$13.060
$13.020
$12.980
Parana Technologies
$19.482
$19.488
DigiPath Technology Company
$21.452
$19.736
ChromeModa Solutions
$21.890
$17.950
IDEA Electronic Components Group
$20.796
$19.701
Lixinc
Kepictronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
GreenTree Electronics
Robosynatics
Lucentia Tech
$21.824
$20.209
Corphita
Perfect Parts
PLastic/Epoxy material provides durability and protection for the internal components of the clock driver, ensuring long-term reliability and performance.
Surface mount capability allows for easy and efficient installation on circuit boards, saving space and simplifying the assembly process.
Differential input conditioning helps to reduce noise and improve signal integrity, resulting in more accurate clock signal generation.
Operating at a low nominal supply voltage of 2.5V allows for energy efficiency and compatibility with a wide range of electronic devices.
Low propagation delay ensures quick response times and efficient data transfer, making the clock driver suitable for high-speed applications.
Industrial-grade temperature tolerance ensures reliable operation in harsh environments with varying temperature conditions.
High maximum operating frequency of 180MHz enables the clock driver to support high-performance systems and data processing speeds.
Clock Drivers & Buffers CDCV855IPWR attributes and parameters. Explore more Clock Drivers & Buffers devices from Texas Instruments
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
CDCV855IPWR Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Hitano Enterprise
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1554216004
Molex
WIRE AND CABLE;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Vicor
Eic Semiconductor
CDCVF310PW
The Texas Instruments CDCVF310PW clock driver has a 4ns propagation delay at 2.5V, with 24 terminals in a small outline package. It operates b/w -40 to 85°C and supports up to 200MHz frequency, ideal for industrial applications requiring precise timing control.
IDT2305-1DCGI8
Integrated Device Technology
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2305NZ-1HDCGI8
Renesas Electronics
Renesas Electronics clock driver 2305NZ-1HDCGI8 operates at 3.3V with 8 terminals in a small outline package. It features a max output current of 12A, propagation delay of 8.7ns, and industrial temperature grade. Ideal for applications requiring precise timing control in compact electronic devices.
LMK03318RHSR
LMK03318RHSR clock driver by Texas Instruments operates at 3.3V with 48 terminals in a square package style. It features differential mux input conditioning, 16 true outputs, and a min operating temperature of -40°C. Ideal for industrial applications requiring precise timing control and signal synchronization.
CDCM61004RHBR
CDCM61004RHBR clock driver by Texas Instruments operates at 3.3V, with 32 terminals and load capacitance of 5pF. It features input conditioning MUX for industrial applications, with a max operating temperature of 85°C and package style in CHIP CARRIER form.
AD9528BCPZ
Analog Devices
AD9528BCPZ by Analog Devices is a Clock Driver & Buffer with 72 terminals, operating at -40 to 85°C. It features 28 true outputs, differential mux input conditioning, and a max frequency of 1000 MHz. Ideal for industrial applications requiring precise clock distribution in compact spaces.
8SLVP1102ANLGI8
The Renesas Electronics clock driver 8SLVP1102ANLGI8 operates at 2.5/3.3V with 0.25ns propagation delay, suitable for industrial applications. It features a square package style, differential input conditioning, and matte tin terminal finish. With 16 terminals and a compact size of 3x3mm, it offers low power supply current of 106mA for efficient performance in various electronic systems.
LMK04906BISQE/NOPB
LMK04906BISQE/NOPB clock driver by Texas Instruments operates at 3.3V with 64 terminals in a square package. It features differential mux input conditioning, 6 true outputs up to 2600 MHz, and a max operating temperature of 85°C. Ideal for industrial applications requiring precise clock synchronization and signal buffering.
9DB633AFLF
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
CY2304SXC-1T
Infineon Technologies
CY2304SXC-1T clock driver by Infineon operates at 3.3V, with 8 terminals and a load capacitance of 15pF. It features a small outline package style, Gull Wing terminal form, and is suitable for commercial temperature grade applications up to 70°C.
8V79S680NLGI8
The Renesas Electronics 8V79S680NLGI8 clock driver features a propagation delay of 0.85 ns, 16 true outputs, and operates in industrial temperature grades. It is designed for applications requiring differential input conditioning and a nominal voltage of 3.3 V, with surface mount packaging suitable for various electronic systems.
DS90LV110TMTCX/NOPB
DS90LV110TMTCX/NOPB by Texas Instruments is a Clock Driver & Buffer with 3.6 ns Propagation Delay, 3.3V Nominal Voltage, and 28 Terminals. It is used in industrial applications requiring differential input conditioning and 3-STATE output characteristics. The package style is small outline with thin profile, suitable for surface mount assembly.
MC100LVEP14DTG
MC100LVEP14DTG clock driver by Onsemi features 0.525ns propagation delay, 2.5V nominal voltage, and 2000MHz min fmax. Ideal for industrial applications requiring differential mux input conditioning in a small outline package with -40 to 85°C operating temperature range.
8P34S1106NLGI
8P34S1106NLGI by Renesas Electronics is a Clock Driver with 0.4 ns Propagation Delay, 1.8V Nominal Voltage, and 12 True Outputs. It is used in applications requiring precise timing synchronization in industrial settings due to its low delay and high output count capabilities.
8SLVD1204-33NLGI
Renesas Electronics' 8SLVD1204-33NLGI clock driver has a propagation delay of 0.31 ns, operates at 3.3V, and offers differential mux input conditioning. Ideal for industrial applications requiring precise timing synchronization in compact spaces due to its small form factor and low power consumption.
SI5330B-B00206-GM
Silicon Labs
SI5330B-B00206-GM by Silicon Labs is a clock driver and buffer with surface mount capability. It has 1 function, operates at a nominal voltage of 1.8V, and has a propagation delay of 4ns. This chip carrier package is commonly used in industrial applications requiring precise timing control.
CDC337DW
The Texas Instruments CDC337DW clock driver has a propagation delay of 0.9 ns, operates at 5V, and offers 8 true outputs. Ideal for industrial applications requiring precise timing control in a compact package with surface mount capability.
SI5330F-B00214-GM
Skyworks Solutions
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ZL40223LDG1
Microchip Technology
ZL40223LDG1 clock driver by Microchip operates at 2.5V, with a propagation delay of 2ns. It features differential mux input conditioning and 16 true outputs, suitable for industrial applications requiring precise timing synchronization in a compact square package.
9DB403DGILFT
9DB403DGILFT by Renesas Electronics is a clock driver and buffer with a rectangular package, small outline, thin profile, and shrink pitch. It operates at a nominal voltage of 3.3V and has a max operating temperature of 85°C. This device is commonly used in industrial applications requiring precise timing synchronization.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
CDCV304PWR
CDCV304PWR by Texas Instruments is a clock driver with 3ns propagation delay, suitable for industrial applications. It operates at 2.5V nominal voltage and has 4 true outputs with a max frequency of 200MHz. This small outline package features surface mount design and standard input conditioning, making it ideal for compact electronic devices.
CDCV304PWRG4
CDCV304PWRG4 by Texas Instruments is a clock driver with 3ns propagation delay, 10pF load capacitance, and 24A max I (ol). It operates at a supply voltage of 2.5V to 3.3V and is ideal for industrial applications requiring precise timing synchronization in compact designs.
CDCV304PW
CDCV304PW by Texas Instruments is a clock driver with 3ns propagation delay, suitable for industrial applications. It operates at a supply voltage range of 2.3V to 3.6V and offers 4 true outputs with a max frequency of 200MHz. This small outline package features dual terminals and Gull Wing form, making it ideal for surface mount designs.
CDCV304PWG4
CDCV304PWG4 by Texas Instruments is a clock driver with 3ns propagation delay, 10pF load capacitance, and 200MHz min fmax. Ideal for industrial applications requiring precise timing control in a compact package.
CDCVF2505PWR
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCVF25081D
Texas Instruments CDCVF25081D clock driver has 6ns propagation delay at 3.3V, with 8 true outputs and 200MHz fmax. Ideal for industrial applications requiring precise timing control in compact designs due to its small outline package and standard input conditioning.
CDCVF2505PWRG4
CDCVF2505D
CDCVF25084PW
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCVF2509PW
PLL BASED CLOCK DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCVF2310PWRG4
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCVF25081PW
CDCV304TPWREP
The Texas Instruments CDCV304TPWREP clock driver has a 4.5 ns propagation delay at 2.5V, suitable for industrial applications. With 8 terminals and a small outline package style, it operates b/w -40 to 105°C with a load capacitance of 10 pF. This surface-mount device supports standard input conditioning and offers a max operating temperature of 260°C.
CDCVF2310PW
CDCVF2310PW by Texas Instruments is a clock driver & buffer with a propagation delay of 3.5 ns, operating at a voltage range of 2.3V to 3.6V. It is commonly used in industrial applications requiring high-speed signal transmission and precise timing control.
CDCV855IPWG4
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCV850DGGG4
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCV855IPWRG4
CDCV850DGGR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved