Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 100 mA; Maximum Holding Current: 75 mA; JESD-609 Code: e0; Maximum RMS On-state Current: 6 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
NAC Semi
1+ parts
100+ parts
1k+ parts
10k+ parts
Assy Fe
Triode For Alternating Current (TRIAC) 2N6342A attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Teccor Electronics
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
2N6342A Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Teccor - Littelfuse Company Overview Teccor Electronics was a manufacturer of semiconductor products for the telecommunications and industrial market segments. The company manufactured two product groups: a line of transient voltage suppressor devices and a line of power switching devices. Tecor Electronics was acquired by Littelfuse in July, 2003. Teccor - Littelfuse Products The types of products manufactured by Teccor - Littelfuse include transient voltage suppressor devices and power switching devices.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
LM358N
EU2B-YS2J03F
Idec
ROTARY SWITCH;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Kec
BT137S-600E
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA25-600CW3G
BTA25-600CW3G by Onsemi is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125 °C, ideal for snubberless applications requiring up to 35mA DC gate trigger current. The package style is flange mount with isolated case connection, suitable for various AC control systems.
MAC997A6RLRPG
MAC997A6RLRPG by Onsemi is a single TRIAC with 3 terminals. It has a max RMS on-state current of 0.8A and can handle a repetitive peak off-state voltage of 400V. Ideal for applications requiring precise AC power control in various electronic devices.
MAC15A8
MAC15A8 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 15A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
BT138-800G
TRIAC; Surface Mount: NO; Maximum Holding Current: 60 mA; Maximum DC Gate Trigger Current: 50 mA; Maximum RMS On-state Current: 12 A; Terminal Finish: Matte Tin (Sn);
DTB3
DTB3 by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 3A max RMS on-state current. It is commonly used in applications requiring precise AC power control such as dimmer switches and motor speed controllers due to its high repetitive peak off-state voltage of 600V.
MAC9NG
MAC9NG by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 8A, and max. DC gate trigger voltage of 1.5V. It operates b/w -40 to 125 °C and is ideal for AC power control applications due to its high repetitive peak off-state voltage of 800V and low leakage current of 2mA.
TIC201B
Texas Instruments
TIC201B by Texas Instruments is a TRIAC with 2.5A RMS on-state current, 25mA max DC gate trigger current, and 200V repetitive peak off-state voltage. It operates b/w -40°C to 110°C and is ideal for AC power control applications requiring precise switching capabilities.
T405-600W
STMicroelectronics
STMicroelectronics' T405-600W is a 4A TRIAC with 600V repetitive peak off-state voltage. It operates b/w -40°C to 125°C, suitable for AC power control applications. Featuring a max DC gate trigger current of 5mA, it is designed as a single quadrant logic level TRIAC.
TIC216D
TIC216D by Texas Instruments is a TRIAC with 400V repetitive peak off-state voltage, 6A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for AC power control applications in various industries due to its 4-quadrant logic level TRIAC configuration and -40°C to 110°C operating temperature range.
DTA05B
DTA05B by Onsemi is a TRIAC with max on-state voltage of 2V, DC gate trigger current of 15mA, and leakage current of 0.1mA. It operates b/w -25 °C to 110°C, suitable for AC applications requiring max RMS on-state current of 0.5A.
T810-600B-TR
T810-600B-TR by STMicroelectronics is a single TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40°C to 125°C, with a max DC gate trigger voltage of 1.3V. Ideal for applications requiring precise AC power control in various electronic devices.
AVS12CB
STMicroelectronics' AVS12CB is a TRIAC with 600V repetitive peak off-state voltage and 12A max RMS on-state current. It operates b/w 0-125°C, ideal for AC power control applications. The package style is flange mount with through-hole terminals in a rectangular shape.
BTA316-800B
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC236M
TIC236M by Texas Instruments is a TRIAC with 12A RMS on-state current, 600V repetitive peak off-state voltage, and 110°C max operating temp. Ideal for AC power control applications due to its 50mA DC gate trigger current, -40°C min operating temp, and 2mA max leakage current.
BTB16-800BW3G
BTB16-800BW3G by Onsemi is a TRIAC with 16A max RMS current, 800V repetitive peak off-state voltage, and 50mA max DC gate trigger current. Ideal for applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC997B8RLRP
MAC997B8RLRP by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in devices like dimmers, motor speed controllers, and heating regulators.
BT139-600E/DG,127
TRIAC; Surface Mount: NO; Maximum Holding Current: 45 mA; Maximum RMS On-state Current: 16 A; JESD-609 Code: e3; Maximum Leakage Current: .5 mA;
T2550-12G
T2550-12G by STMicroelectronics is a snubberless TRIAC with 1200V repetitive peak off-state voltage and 25A max RMS on-state current. It is designed for AC power control applications, featuring a small outline package, Gull Wing terminals, and UL recognized reference standard.
MAC97A6RLRFG
MAC97A6RLRFG by Onsemi is a TRIAC with 400V repetitive peak off-state voltage, 0.6A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring 4 quadrant logic level TRIACs in environments ranging from -40 °C to 110°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Teccor Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved