Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1062-14-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge 14-18 AWG, rated for 13A current. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
Median Price
$0.178
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Boersig
1+ parts
$0.139
100+ parts
-
1k+ parts
10k+ parts
Element14
$0.408
$0.291
$0.246
TTI Europe
$0.151
RS Americas
$0.564
TE Connectivity
$0.190
Verical
$0.174
Farnell
Chip1Stop
$0.222
Powell Electronics
$0.170
CustomConnectorKits
$0.260
Nova Conductors
$0.365
Maritex
$0.447
$0.256
$0.202
IBS Electronics
$0.245
Vyrian
NAC Semi
$0.206
LJR Electronics
ComSIT Distribution GmbH
ComSIT USA
Electro Sonic
$0.640
$0.387
ACDS - Activité Composants Distribution Service
TME
Cyclops Electronics Ltd
Extreme Components
Elcom Components
VNN
Semicontronic
$0.118
$0.115
$0.114
Argo Parts USA
$0.360
$0.349
Continental Prestige Electronics
$0.353
Advanced Electronics
$0.371
$0.352
Aztec Data Supply Inc.
$4.549
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Allen Electronics Distributors
$0.390
$0.351
EMSNET (Excess)
Assy Fe
Futuretech Components
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
Netroflash
$0.358
$0.347
$0.340
Crimped terminals provide a secure and reliable connection, ensuring stable performance.
Accommodates a wide range of cable sizes, offering flexibility in installation.
Can withstand high temperatures, suitable for various operating environments.
Stamped contact design ensures consistent performance and durability.
Capable of functioning in extreme cold conditions, making it versatile in different climates.
Suitable for supporting a range of wire gauges, making it versatile for different wiring applications.
Provides ample surface area for electrical conduction, ensuring efficient power transfer.
Capable of handling a relatively high current, making it suitable for various electrical applications.
Female contact gender allows for easy mating with compatible male connectors, ensuring secure connections.
Copper alloy material offers excellent conductivity and corrosion resistance, ensuring long-lasting performance.
Assembly Products 1062-14-0122 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
Cross Section Area:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Length:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - 1-06y-1y-0yyy - material chg 21/APR/2021 Global Footprint Change 15/MAR/2022
PCN Packaging - 1062-(14,16)-01(22,222) Packaging 28/Feb/2018 1062-1(4,6)-(01,12)22 Packaging Reversal 07/May/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ROHM
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
International Semiconductor
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
New Jersey Semiconductor Products
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
02-09-2116
Molex
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
43031-0003
Molex 43031-0003 CONTACT features CHAIN design, PHOSPHOR BRONZE material. Supports wire sizes 24-20 AWG with 0.073" cable entry. Ideal for 43020, 43640, and 44300 applications requiring male contacts in straight mounting style.
RJFTVC7G
Amphenol
CONNECTOR ACCESSORY; Material: ALUMINIUM; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 85 Cel;
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
DF14-3032SCFA
Hirose Electric
DF14-3032SCFA by Hirose Electric is a crimp contact assembly product with UL approval. It features bellowed female contacts for 32-30 AWG wires, suitable for UL1571 cables. The straight mounting style and phosphor bronze material make it ideal for various electronic applications.
WP-4P
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Usage: DTP SERIES; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: WEDGE LOCK;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
M83513/05-07
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
507528200
Molex 507528200 CONTACT features CRIMP terminals for 22-20 AWG wires, rated at 3.5A and 250V AC/DC. Suitable for applications requiring FEMALE CHAIN contacts with 0.0591-0.0709 inch cable entry, ideal for Assembly Products.
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
46999-0101
The Molex 46999-0101 is a female contact with compression style, made of brass. It is used in the 7880 Series Housing assembly products for wire sizes ranging from 30 AWG to 24 AWG. The contact design is loose, with a finish thickness of 100 and terminal length of 0.186 inch, suitable for straight mounting applications.
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
7-1452668-3
TE Connectivity's 7-1452668-3 is a CRIMP terminal with a wire gauge range of 20-18 AWG and a cross-section area of 0.75 mm2. It can handle temperatures from -40 to 150 °C and has a rated current of 16 A. This female contact design is commonly used in assembly products.
1SET111002R0000
TE Connectivity's 1SET111002R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 20 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
2002-1492
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;
1SNK900103R0000
Abb
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
M23053/5-103-9
Alpha Wire
ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYCARBONATE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel;
855-9900
TERMINAL BLOCK ACCESSORY;
FSD77-8-D
Panduit
Panduit's FSD77-8-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a 0.12" cable entry. Ideal for electrical assembly applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0122
TE Connectivity's 1062-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 125°C.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
1062-20-0222
TE Connectivity 1062-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and straight mounting style with copper alloy material.
1062-16-1222
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 12; Contact Gender: FEMALE; Minimum Cable Entry: .075 inch; Cross Section Area: 3.3 mm2;
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
1062-16-0644
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
1062-20-0244
TE Connectivity 1062-20-0244 is a CRIMP terminal with stamped contact design. It has a wire gauge of 16 AWG, rated for 7.5A current at 1500V AC. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-12-0222
TE Connectivity's 1062-12-0222 CONTACT features CRIMP terminal type, suitable for 10 AWG wire gauge with rated current of 25 A. With stamped contact design and copper alloy material, it is ideal for applications requiring female gender contacts in straight mounting style.
1062-12-0144
TE Connectivity's 1062-12-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.113" to 0.176".
1062-16-0177
TE Connectivity's 1062-16-0177 is a CRIMP terminal with a wire gauge range of 18 AWG to 14 AWG. It has a max operating temperature of 125°C and can handle a rated current of 13 A. This assembly product is commonly used in applications requiring secure wire connections.
1062-20-0622
TE Connectivity's 1062-20-0622 is a CRIMP terminal with a wire gauge of 14 AWG and a cross-section area of 2 mm2. It can handle temperatures ranging from -55 to 125 °C and has a rated current of 7.5 A. This terminal is commonly used in assembly products for female contact applications.
1062-16-0677
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 16; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Cable Entry: .1 inch;
1062-20-0322
TE Connectivity's 1062-20-0322 crimp terminal features stamped contact design, suitable for wire gauge 16 AWG with a cross-section area of 1.5 mm². With a rated current of 7.5 A, it is ideal for applications requiring a female contact gender and operating temperatures ranging from -55 to 125°C.
1062-14-0144
TE Connectivity's 1062-14-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 18 to 14 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.095 to 0.15 inch.
1062-16-0988
TE Connectivity's 1062-16-0988 is a CRIMP terminal with stamped contact design. It supports wire gauge 14 (2 mm2) and rated current of 13A, suitable for applications requiring female contact gender and cable entry from 0.075 to 0.14 inch.
1062-14-0122-LD
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .095 inch; DIN Conformity: NO; Contact Gender: FEMALE; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved