Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
Median Price
$0.326
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.288
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$0.310
RS (Exports)
$0.610
$0.520
$0.441
DigiKey
$0.870
$0.627
$0.533
TE Connectivity
Arrow
Verical
$0.327
Future Electronics
$0.275
Mouser Electronics
$0.282
TTI Europe
$0.248
Newark
$0.448
Chip1Stop
$0.474
Master Electronics
$0.360
$0.246
Farnell
$0.385
$0.377
Nova Conductors
$0.552
TME
$0.560
$0.484
Vyrian
IBS Electronics
$0.502
$0.491
NAC Semi
$0.550
LJR Electronics
Q Components
Elcom Components
EMSNET
VNN
Electro Sonic
$0.453
$0.414
Extreme Components
FDH Electronics
Semicontronic
$0.211
$0.206
$0.205
Advanced Electronics
$0.397
Aranea Global
$0.541
$0.519
Argo Parts USA
$0.535
Aztec Data Supply Inc.
$6.854
Perfect Parts
GreenTree Electronics
EMSNET (Excess)
Glotronic Ltd.
Abacus Technologies
Eastek
Resion (Excess)
Allen Electronics Distributors
$0.433
$0.411
Continental Prestige Electronics
$0.273
Authorized Procurement Solutions
Assy Fe
Provides secure electrical connection and easy installation for various applications.
Accommodates a wide range of cable sizes, increasing versatility for use.
Ensures stable performance in high temperature environments.
Offers reliable contact pressure for consistent electrical conductivity.
Suitable for use in extreme cold conditions without compromising performance.
Compatible with a common wire size, making it a convenient choice for most applications.
Clearly identifies the product for easy inventory management and replacement.
Provides sufficient electrical conductivity for optimal performance.
Ensures compatibility with a variety of wire sizes for flexibility in installation.
Accommodates larger wire sizes for handling higher currents and power requirements.
Capable of carrying a substantial current load for various electrical applications.
Accommodates larger cable sizes, expanding the range of compatible cables.
Suitable for specific connection configurations, ensuring compatibility with male connectors.
Assembly Products 1062-16-0144 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1062-16-0144 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - 1-06y-1y-0yyy - material chg 21/APR/2021 Global Footprint Change 15/MAR/2022
PCN Packaging - 106y 12/Apr/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148WT
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
593708000
Molex
The Molex 593708000 CONTACT is a CRIMP type terminal with CHAIN contact design. It supports wire sizes from 28 AWG to 22 AWG and has a max cable entry of 0.059 inch. Ideal for use in the 51216 SERIES applications requiring FEMALE contact gender and STRAIGHT mounting style with SQUARE PIN-SOCKET contact design made of PHOSPHOR BRONZE material.
5749081-1
CONNECTOR ACCESSORY; Shielding: YES; MIL Conformity: NO; Wire Gauge (AWG): 0; Material: ZINC ALLOY; Additional Features: SHIELDED;
SSF-21T-P1.4
J S T Mfg
SSF-21T-P1.4 by J S T Mfg is a CSA and UL approved CRIMP terminal connector with 2.1" min cable entry, -40 to 105°C temp range, ideal for 22-18 AWG wires in power applications. Featuring a FEMALE contact gender, PHOSPHOR BRONZE material, and 7A rated current capacity for reliable connections.
1-968851-1
TE Connectivity 1-968851-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
3505-28B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
09300160301
Harting Electronics & Kg
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: HOUSING; IEC Conformity: NO; DIN Conformity: NO;
AT13-204-2005-SR
Amphenol
CONNECTOR ACCESSORY;
D38999/33F11R
CONNECTOR ACCESSORY; Shell Sizes: 11; Maximum Operating Temperature: 175 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Material: METAL;
348461-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Maximum Operating Temperature: 180 Cel;
0460-215-16141
TE Connectivity's 0460-215-16141 is a male power contact with crimp terminal type, suitable for 14 AWG wire. It has a rated current of 13A and operates b/w -55°C to 125°C. Ideal for applications requiring straight mounting, such as power assemblies.
8599-0720-900
Souriau
SPHD-001T-P0.5
SPHD-001T-P0.5 by J S T Mfg is a CRIMP terminal for PBV SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.039-0.059 inch cable entry. Ideal for 26-22 AWG wires in applications requiring FEMALE contacts at -25 to 85 °C temperature range.
AT60-12-0166
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
1766245-1
TE Connectivity's 1766245-1 is a male power contact with solder terminal type, rated for 35A current. Made of brass, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting with wire sizes up to 0 AWG.
1-104480-3
TE Connectivity 1-104480-3 is a crimp terminal with a rated voltage of 300V and a max operating temperature of 105°C. It is commonly used in power and signal applications, with approvals from CSA and UL.
828922-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0;
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0122
TE Connectivity's 1062-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 125°C.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
1062-20-0222
TE Connectivity 1062-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and straight mounting style with copper alloy material.
1062-16-1222
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 12; Contact Gender: FEMALE; Minimum Cable Entry: .075 inch; Cross Section Area: 3.3 mm2;
1062-14-0122
TE Connectivity's 1062-14-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge 14-18 AWG, rated for 13A current. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
1062-16-0644
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
1062-20-0244
TE Connectivity 1062-20-0244 is a CRIMP terminal with stamped contact design. It has a wire gauge of 16 AWG, rated for 7.5A current at 1500V AC. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-12-0222
TE Connectivity's 1062-12-0222 CONTACT features CRIMP terminal type, suitable for 10 AWG wire gauge with rated current of 25 A. With stamped contact design and copper alloy material, it is ideal for applications requiring female gender contacts in straight mounting style.
1062-12-0144
TE Connectivity's 1062-12-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.113" to 0.176".
1062-16-0177
TE Connectivity's 1062-16-0177 is a CRIMP terminal with a wire gauge range of 18 AWG to 14 AWG. It has a max operating temperature of 125°C and can handle a rated current of 13 A. This assembly product is commonly used in applications requiring secure wire connections.
1062-20-0622
TE Connectivity's 1062-20-0622 is a CRIMP terminal with a wire gauge of 14 AWG and a cross-section area of 2 mm2. It can handle temperatures ranging from -55 to 125 °C and has a rated current of 7.5 A. This terminal is commonly used in assembly products for female contact applications.
1062-16-0677
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 16; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Cable Entry: .1 inch;
1062-20-0322
TE Connectivity's 1062-20-0322 crimp terminal features stamped contact design, suitable for wire gauge 16 AWG with a cross-section area of 1.5 mm². With a rated current of 7.5 A, it is ideal for applications requiring a female contact gender and operating temperatures ranging from -55 to 125°C.
1062-14-0144
TE Connectivity's 1062-14-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 18 to 14 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.095 to 0.15 inch.
1062-16-0988
TE Connectivity's 1062-16-0988 is a CRIMP terminal with stamped contact design. It supports wire gauge 14 (2 mm2) and rated current of 13A, suitable for applications requiring female contact gender and cable entry from 0.075 to 0.14 inch.
1062-16-0144-LS
CONNECTOR ACCESSORY; Rated Current: 13 A; Cross Section Area: 2 mm2; Terminal Type: CRIMP; Maximum Cable Entry: .14 inch; Wire Gauge (AWG): 14;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved