Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1062-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 125°C.
Median Price
$0.169
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Boersig
1+ parts
$0.101
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.196
$0.186
TTI Europe
$0.116
Arrow
$0.106
RS Americas
$0.188
Verical
Element14
$0.258
$0.219
Farnell
$0.190
$0.142
$0.122
Powell Electronics
$0.150
Nova Conductors
TME
$0.240
$0.172
$0.153
$0.146
CustomConnectorKits
$0.300
Component Electronics Inc.
$1.380
$1.040
$0.900
Vyrian
Electro Sonic
$0.329
$0.229
$0.202
NAC Semi
$0.149
EMSNET
IBS Electronics
$0.195
LJR Electronics
Chip Stock
ABC Electronics Ltd.
Elcom Components
Lakeview Electronics
American Connector Supply Corp
VNN
Extreme Components
A&K Electronics
Rotakorn
Bristol Electronics
Semicontronic
$0.086
$0.084
$0.083
Argo Parts USA
$0.180
Advanced Electronics
Modulus Dynamics
$0.206
$0.204
$0.198
Aztec Data Supply Inc.
$5.929
Perfect Parts
EMSNET (Excess)
Resion (Excess)
ErreBi Group
Eastek
Allen Electronics Distributors
Benley Electronics
Assy Fe
Futuretech Components
Continental Prestige Electronics
$0.285
$0.105
S.R.D Solutions
Netroflash
$0.184
$0.179
$0.175
Robosynatics
Lucentia Tech
Crimp terminals are quick and easy to install, providing a secure connection for the wires.
Allows for flexibility in cable size, accommodating smaller cables for various applications.
Withstands high temperatures, making it suitable for a wide range of environments.
Stamped contacts ensure consistent quality and performance in electrical connections.
Capable of functioning in extremely low temperatures, ideal for cold environments.
Compatible with standard 16 AWG wire sizes, commonly used in electrical applications.
Handles a current rating of 7.5 amps, suitable for many power applications.
Designed for power applications, ensuring efficient and reliable power transmission.
Straight mounting style allows for easy installation and secure placement of the contacts.
Assembly Products 1062-20-0122 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
IEC Conformity:
MIL Conformity:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1062-20-0122 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - 106y-20-0yyy Revision Increase 24/Sep/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Diodes Incorporated
Nexperia
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
General Transistor
Comset Semiconductors
02-08-1001
Molex 02-08-1001 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in Assembly Products for STRAIGHT mounting applications.
3-640252-1
TE Connectivity
TE Connectivity 3-640252-1 is a signal contact with crimp terminal type, rated for 250V AC/DC and 6.5A current. It has a brass construction, CSA and UL approvals, suitable for SL-156 housing applications at temperatures ranging from -55 to 105°C.
1SET111007R0000
TE Connectivity's 1SET111007R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temperature of 105°C, it offers reliable performance in various straight mounting setups.
16-02-0105
CONNECTOR ACCESSORY;
1053251004
0-0281934-4
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
AT62-201-20141
Amphenol
3595
Keystone Electronics
Assembly Items;
1658670-1
TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.
AT06-3S-CAP
221-523/000-004
Wago
TERMINAL BLOCK ACCESSORY;
W4S-P012
TE Connectivity's W4S-P012 is an Assembly Product with -55 to 125°C operating range. It supports up to 0 AWG wire, designed for power and signal applications using Polybutylene Terephthalate material.
293726-1
1766195-1
TE Connectivity's 1766195-1 is a CRIMP terminal with copper alloy material, suitable for POWER applications. With a finish thickness of 200 µm, it supports wire gauge from 14 to 12 AWG and can handle up to 35 A current. Ideal for male contact gender in straight mounting style, operating b/w -55°C to 105°C.
3030174
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO;
1729532201
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
221-525/000-004
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
1062-20-0222
TE Connectivity 1062-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and straight mounting style with copper alloy material.
1062-16-1222
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 12; Contact Gender: FEMALE; Minimum Cable Entry: .075 inch; Cross Section Area: 3.3 mm2;
1062-14-0122
TE Connectivity's 1062-14-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge 14-18 AWG, rated for 13A current. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
1062-16-0644
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
1062-20-0244
TE Connectivity 1062-20-0244 is a CRIMP terminal with stamped contact design. It has a wire gauge of 16 AWG, rated for 7.5A current at 1500V AC. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-12-0222
TE Connectivity's 1062-12-0222 CONTACT features CRIMP terminal type, suitable for 10 AWG wire gauge with rated current of 25 A. With stamped contact design and copper alloy material, it is ideal for applications requiring female gender contacts in straight mounting style.
1062-12-0144
TE Connectivity's 1062-12-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.113" to 0.176".
1062-16-0177
TE Connectivity's 1062-16-0177 is a CRIMP terminal with a wire gauge range of 18 AWG to 14 AWG. It has a max operating temperature of 125°C and can handle a rated current of 13 A. This assembly product is commonly used in applications requiring secure wire connections.
1062-20-0622
TE Connectivity's 1062-20-0622 is a CRIMP terminal with a wire gauge of 14 AWG and a cross-section area of 2 mm2. It can handle temperatures ranging from -55 to 125 °C and has a rated current of 7.5 A. This terminal is commonly used in assembly products for female contact applications.
1062-16-0677
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 16; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Cable Entry: .1 inch;
1062-20-0322
TE Connectivity's 1062-20-0322 crimp terminal features stamped contact design, suitable for wire gauge 16 AWG with a cross-section area of 1.5 mm². With a rated current of 7.5 A, it is ideal for applications requiring a female contact gender and operating temperatures ranging from -55 to 125°C.
1062-14-0144
TE Connectivity's 1062-14-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 18 to 14 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.095 to 0.15 inch.
1062-16-0988
TE Connectivity's 1062-16-0988 is a CRIMP terminal with stamped contact design. It supports wire gauge 14 (2 mm2) and rated current of 13A, suitable for applications requiring female contact gender and cable entry from 0.075 to 0.14 inch.
1062-20-0122-E
CONNECTOR ACCESSORY; Rated Current: 7.5 A; Maximum Wire Size: 16 AWG; DIN Conformity: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved