Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1062-20-0622 is a CRIMP terminal with a wire gauge of 14 AWG and a cross-section area of 2 mm2. It can handle temperatures ranging from -55 to 125 °C and has a rated current of 7.5 A. This terminal is commonly used in assembly products for female contact applications.
Median Price
$0.173
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.188
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$0.300
$0.251
$0.225
DigiKey
$0.310
$0.227
$0.193
TTI
$0.144
Mouser Electronics
Master Electronics
$0.146
$0.138
Verical
$0.169
Chip1Stop
$0.167
TE Connectivity
$0.140
Nova Conductors
$0.186
Electro Sonic
$0.229
$0.176
$0.163
Vyrian
Rapid Electronics
TME
LJR Electronics
VNN
IBS Electronics
$0.295
$0.228
$0.208
FDH Electronics
Elcom Components
Semicontronic
$0.118
$0.115
$0.114
Argo Parts USA
$0.180
Continental Prestige Electronics
$0.182
Netroflash
$0.177
Aztec Data Supply Inc.
$6.079
Perfect Parts
Allen Electronics Distributors
$0.195
$0.175
EMSNET (Excess)
Resion (Excess)
Robosynatics
$7.786
$7.210
Lucentia Tech
Crimped terminals provide a secure and reliable connection, ensuring long-lasting performance.
Fits smaller cable entries, allowing for versatility in installation options.
Can withstand high temperatures, making it suitable for a wide range of environments.
Stamped contact design ensures efficient and consistent electrical connectivity.
Capable of functioning in extremely low temperatures, making it suitable for various applications.
Designed to accommodate a range of wire gauges for flexibility in wiring configurations.
Provides ample cross-sectional area for efficient current flow.
Supports smaller wire sizes, enabling compatibility with a variety of wiring setups.
Capable of handling larger wire sizes for increased current-carrying capacity.
Suitable for moderate current applications, ensuring safe and reliable operation.
Accommodates larger cable entries, providing flexibility in installation options.
Designed as a female contact for mating with corresponding male connectors, ensuring compatibility and secure connections.
Assembly Products 1062-20-0622 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - 106y-20-0yyy Revision Increase 24/Sep/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bkc Semiconductors
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Pro-an Electronic
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Cheng-yi Electronic
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SPC TECHNOLOGY/ MULTICOMP
Micro Commercial Components
170204-2
TE Connectivity's 170204-2 CONTACT features CRIMP terminal type, rated voltage of 250V, and operating temperature up to 105°C. Ideal for SIGNAL applications with wire gauge ranging from 26 AWG to 20 AWG and a max current rating of 2A.
M24308/26-2F
Itt Cannon
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SCREWLOCK; Material: STEEL; MIL Conformity: YES;
350218-1
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
5-66504-9
TE Connectivity 5-66504-9 CONTACT features CRIMP terminal type, suitable for 24-20 AWG wires. With a finish thickness of 30, it has a straight mounting style and round pin-socket contact design. Ideal for applications requiring 0.05-0.06 inch cable entry such as automotive or industrial assemblies.
10757690
Delphi Connection Systems
CONNECTOR ACCESSORY;
221-515/000-004
Wago
TERMINAL BLOCK ACCESSORY;
8599-0720-900
Souriau
RC16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Rated AC Voltage: 220 V; Assembly Item Name: CONTACT; Contact Resistance: 2.5 mohm; Contact Gender: FEMALE;
1053002300
Molex
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
M23053/5-102-0
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
216-206
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; Maximum Wire Size: 14 AWG;
WM-6P
TE Connectivity's WM-6P is an Assembly Product for DTM SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. Designed for power and signal applications, it features Polybutylene Terephthalate material for robust performance.
7810.6412.0
13663715
Aptiv
685030101
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
3030161
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
M23053/16-004-0
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
1060-14-0122
TE Connectivity's 1060-14-0122 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in assembly products.
09150006102
Harting Electronics & Kg
Harting Electronics & Kg's 09150006102 is a HAN D CONNECTOR with CRIMP terminals, rated for 10A current. It features male contacts with 3mohm resistance and accepts up to 18 AWG wire size. Compliant with IEC standards, it is ideal for applications requiring reliable electrical connections in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-16-0622
TE Connectivity's 1062-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 13A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0122
TE Connectivity's 1062-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 125°C.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
1062-20-0222
TE Connectivity 1062-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and straight mounting style with copper alloy material.
1062-16-1222
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 12; Contact Gender: FEMALE; Minimum Cable Entry: .075 inch; Cross Section Area: 3.3 mm2;
1062-14-0122
TE Connectivity's 1062-14-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge 14-18 AWG, rated for 13A current. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
1062-16-0644
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
1062-20-0244
TE Connectivity 1062-20-0244 is a CRIMP terminal with stamped contact design. It has a wire gauge of 16 AWG, rated for 7.5A current at 1500V AC. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
1062-12-0222
TE Connectivity's 1062-12-0222 CONTACT features CRIMP terminal type, suitable for 10 AWG wire gauge with rated current of 25 A. With stamped contact design and copper alloy material, it is ideal for applications requiring female gender contacts in straight mounting style.
1062-12-0144
TE Connectivity's 1062-12-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.113" to 0.176".
1062-16-0177
TE Connectivity's 1062-16-0177 is a CRIMP terminal with a wire gauge range of 18 AWG to 14 AWG. It has a max operating temperature of 125°C and can handle a rated current of 13 A. This assembly product is commonly used in applications requiring secure wire connections.
1062-16-0677
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 16; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Cable Entry: .1 inch;
1062-20-0322
TE Connectivity's 1062-20-0322 crimp terminal features stamped contact design, suitable for wire gauge 16 AWG with a cross-section area of 1.5 mm². With a rated current of 7.5 A, it is ideal for applications requiring a female contact gender and operating temperatures ranging from -55 to 125°C.
1062-14-0144
TE Connectivity's 1062-14-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 18 to 14 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.095 to 0.15 inch.
1062-16-0988
TE Connectivity's 1062-16-0988 is a CRIMP terminal with stamped contact design. It supports wire gauge 14 (2 mm2) and rated current of 13A, suitable for applications requiring female contact gender and cable entry from 0.075 to 0.14 inch.
1062-20-0377
TE Connectivity's 1062-20-0377 crimp terminal features stamped contact design, suitable for wire gauge 15 AWG with a cross-section area of 1.5 mm². With a rated current of 7.5 A, it can operate in temperatures ranging from -55 to 125°C, making it ideal for various assembly applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved