Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ASSEMBLY ITEMS; IEC Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO;
Median Price
$0.936
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.473
100+ parts
$0.435
1k+ parts
$0.407
10k+ parts
-
TTI Europe
$0.361
TTI
$1.400
$0.940
CDM Electronics
Verical
$9.012
Nova Conductors
$0.410
Component Electronics Inc.
$3.850
$2.880
$2.500
Q Components
Bisco
Vyrian
J2 Sourcing AB
North Shore Components
Eastern End Electronics, LLC
Electronic Expediters
A2Z Electronics, Inc.
Electro Mavin
QIE Inc.
ECAB
FDH Electronics
Bristol Electronics
Resion
Continental Prestige Electronics
$0.402
Argo Parts USA
$0.398
Advanced Electronics
Authorized Procurement Solutions
GreenTree Electronics
Perfect Parts
Speed Components Ltd (Excess)
Assembly Products M23053/5-105-0 attributes and parameters. Explore more Assembly Products devices from Alpha Wire
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Protek Devices
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
Toshiba
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitano Enterprise
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Promax-johnton
Taiwan Semiconductor
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
SZPD-002T-P0.3
J S T Mfg
CONNECTOR ACCESSORY; Manufacturer Series: ZPD;
W12P
The TE Connectivity W12P is a UL-approved assembly product with operating temperatures ranging from -55°C to 125°C. It features a max wire size of 0 AWG and is designed for power and signal applications using polybutylene terephthalate material. Ideal for various industrial and commercial electrical connections.
MINI-SSHL-002T-P0.2
MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.
DF3-22SCF
DF3-22SCF by Hirose Electric is a female contact with bellowed type, made of phosphor bronze. It has a finish thickness of 39.4 and terminal length of 0.108 inch. This assembly product is used for crimp terminals in straight mounting applications.
19620005096
Harting Electronics & Kg
CONNECTOR ACCESSORY; Assembly Item Name: CABLE GLAND; Material: METAL; Minimum Cable Entry: .5512 inch; MIL Conformity: NO; Maximum Cable Entry: .7087 inch;
16-02-0087
Molex
CONNECTOR ACCESSORY;
12089188
Aptiv
Aptiv 12089188 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it allows cable entry from 0.067 to 0.075 inch. Ideal for assembly products requiring precise crimping on automotive wiring harnesses.
4-1437284-3
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
0460-220-1231
TE Connectivity's 0460-220-1231 crimp terminal features machined contact design, suitable for wire gauges 12-14 AWG. With a rated current of 25A and operating temperatures ranging from -55 to 125°C, it is ideal for various assembly applications.
DF11-22SCA
281934-4
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
1-350524-9
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0;
13697414
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;
AW3P
Amphenol
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
963530-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M23053/16-004-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Assembly Item Name: TAPER SLEEVE; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO;
M23053/16-003-0
TE Connectivity's M23053/16-003-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating b/w -75°C to 150°C. Ideal for various assembly applications requiring high temperature resistance and robust insulation.
ASSEMBLY ITEMS; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN;
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
M23053/5-102-0
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
ASSEMBLY ITEMS; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
Brady
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
M23053/5-111-9
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; IEC Conformity: NO;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO;
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved