Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
Median Price
$0.197
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.096
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.215
Element14
$0.260
$0.254
$0.241
Newark
$0.278
DigiKey
$0.380
$0.226
$0.180
Distrelec
$0.401
$0.282
$0.206
$0.173
Adafruit Industries
$5.285
$5.021
TTI
$0.142
TTI Europe
$0.137
Mouser Electronics
$0.201
NEP Electronics
Verical
$0.240
Interstate Connecting
$0.130
Farnell
$0.166
Powell Electronics
$0.160
Chip1Stop
$0.189
Heilind Electronics
$0.193
$0.182
CustomConnectorKits
$0.070
Digiode
$0.091
TME
$0.170
$0.155
$0.129
Nova Conductors
$0.233
Rapid Electronics
$1,113.408
NAC Semi
Vyrian
Q Components
IBS Electronics
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Bristol Electronics
Quittner & Schimek s.r.o.
EMSNET
VNN
Elcom Components
Semicontronic
$0.082
$0.080
Corphita
$0.086
Modulus Dynamics
$0.225
$0.223
$0.216
Netroflash
$0.221
$0.217
Argo Parts USA
Continental Prestige Electronics
$0.358
$0.188
$0.149
Advanced Electronics
Aztec Data Supply Inc.
$7.276
Andel Nordic
$10.131
$9.726
Glotronic Ltd.
Abacus Technologies
GreenTree Electronics
Perfect Parts
Assy Fe
Authorized Procurement Solutions
EMSNET (Excess)
Eastek
Futuretech Components
The thick finish ensures durability and longevity of the product, making it a reliable choice for various applications.
The crimp terminal type allows for secure connections, making installation quick and easy, making it an ideal choice for efficient assembly processes.
The contact assembly item name indicates that this product is specifically designed for connecting electrical components, ensuring reliable and efficient performance.
With a minimum wire size of 20 AWG, this product is suitable for a wide range of wire gauges, providing flexibility for different wiring setups.
The maximum wire size of 18 AWG ensures compatibility with thicker wires, allowing for versatile applications in various electrical systems.
The female contact gender offers compatibility with male connectors, making this product a suitable choice for creating secure and dependable electrical connections.
The straight mounting style enables easy and straightforward installation, ensuring a hassle-free assembly process for users.
The bellowed contact style helps protect the connections from dust, moisture, and other environmental factors, ensuring reliable performance in diverse conditions.
Assembly Products 33001-3004 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
33001-3004 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Mult Devs Tool Duplication 21/Apr/2022
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
Gulf Semiconductor
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM358N
1607355
Phoenix Contact
CONNECTOR ACCESSORY;
76823-0321
Molex
Molex 76823-0321 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. Ideal for applications requiring 16-14 AWG wire sizes such as 170001 and 171692 assemblies.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
293726-1
1-205089-1
TE Connectivity's 1-205089-1 CONTACT is a CRIMP terminal with operating temperatures from -55 to 125 °C. It supports wire gauges from 24 to 20 AWG, rated for 7.5A current. Ideal for SIGNAL applications, featuring MALE gender and RND PIN-SKT design in COPPER ALLOY material.
FI-C3-A1-15000
Japan Aviation Electronics Industry
FI-C3-A1-15000 by Japan Aviation Electronics features crimp terminal type, operating temp -40 to 80°C, and contact resistance of 40 mohm. Ideal for signal applications with wire sizes ranging from 32 to 28 AWG, rated current of 1A, and female contact gender.
56134-9100
Molex 56134-9100 CONTACT features CRIMP terminal type, 0.0354" min cable entry, and COPPER ALLOY material. Ideal for 51242, 51382, 51353 SERIES applications requiring FEMALE contact gender and SQUARE PIN-SOCKET style. Supports wire sizes from 28 AWG to 22 AWG with 0.067" max cable entry.
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
2-929939-1
TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.
SXH-001T-P0.6
J S T Mfg
SXH-001T-P0.6 by J S T Mfg is a CRIMP terminal with 28-22 AWG wire size range, rated for 3A current at 250V AC/DC. Featuring bellowed contact design, it's ideal for applications requiring female contacts and operating temperatures from -25 to 85°C.
1SNK900101R0000
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
39-00-0077
The Molex 39-00-0077 is a contact assembly product with a crimp terminal type and chain contact design. It is commonly used with 5557, 30067, 44516, or 42474 connectors. With a max wire size of 16 AWG and a mounting style of straight, it is ideal for applications requiring reliable electrical connections.
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
AT60-202-20141
Amphenol
1-1469492-1
TE Connectivity 1-1469492-1 is an Assembly Product with max. operating temp. of 105°C and min. operating temp. of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle zinc alloy material. Ideal for guiding items in various applications.
1-329631-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; DIN Conformity: NO; Usage: BNC CONNECTOR; IEC Conformity: NO; MIL Conformity: NO;
66101-4
TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.
WM-2S
TE Connectivity's WM-2S is an assembly product designed for the DTM SERIES. With a max operating temperature of 125°C and a min operating temperature of -55°C, it is suitable for power and signal applications. This wedge item can accommodate wire sizes up to 0 AWG and is made from polybutylene terephthalate.
7824.6509.0
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33000-1002
The Molex 33000-1002 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can operate in temperatures ranging from -40 to 105°C. Suitable for wire sizes b/w 20-16 AWG, with a contact resistance of 8 mΩ and rated DC voltage of 500V.
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
33000-1004
33000-0002
CONNECTOR ACCESSORY; Minimum Wire Size: 20 AWG; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel; Rated DC Voltage: 500 V; DIN Conformity: NO;
33001-2004
Molex 33001-2004 CONTACT features crimp terminal type for 20-18 AWG wire sizes. Female gender, bellowed style, straight mounting. Ideal for assembly products with finish thickness of 30 units.
33000-1001
The Molex 33000-1001 is a male contact assembly product for MX150 connectors. It features crimp terminals, rated at 22A and 500V DC, with a contact resistance of 8 mohm. Suitable for use in applications requiring a max wire size of 14 AWG and operating temperatures ranging from -40 to 105°C.
33000-0001
CONNECTOR ACCESSORY; Rated Current: 22 A; Assembly Item Name: CONTACT; Maximum Operating Temperature: 105 Cel; Usage: MX150 CONNECTOR; Mounting Style: STRAIGHT;
33001-2003
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG; IEC Conformity: NO; Finish Thickness: 30;
33000-0003
CONNECTOR ACCESSORY; Rated Current: 10 A; Material: COPPER ALLOY; DIN Conformity: NO; Usage: MX150 CONNECTOR; Additional Features: CONTACT FINISH: TIN OVER NICKEL;
33000-0004
33001-2021
CONNECTOR ACCESSORY; Finish Thickness: 30; Contact Style: BELLOWED TYPE; Terminal Type: CRIMP; MIL Conformity: NO; Mounting Style: STRAIGHT;
33001-2005
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Assembly Item Name: CONTACT; IEC Conformity: NO; Mounting Style: STRAIGHT; Terminal Type: CRIMP;
33001-5003
33001-0005
CONNECTOR ACCESSORY; IEC Conformity: NO; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); Contact Style: COMPRESSION; Maximum Wire Size: 22 AWG; MIL Conformity: NO;
33001-1005
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); Contact Gender: FEMALE; Finish Thickness: 30; IEC Conformity: NO;
33001-3003
CONNECTOR ACCESSORY; Finish Thickness: 30; Minimum Wire Size: 16 AWG; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); Mounting Style: STRAIGHT; DIN Conformity: NO;
33001-3005
Molex 33001-3005 CONTACT features CRIMP terminal type, FEMALE gender, and BELLOWED contact style. Ideal for 22 AWG wire in STRAIGHT mounting applications.
33001-3021
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Finish Thickness: 30; Terminal Type: CRIMP; DIN Conformity: NO; MIL Conformity: NO;
33001-3022
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; IEC Conformity: NO; Minimum Wire Size: 20 AWG; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG;
33001-3023
CONNECTOR ACCESSORY; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); Contact Gender: FEMALE; DIN Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved