Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 33001-2004 CONTACT features crimp terminal type for 20-18 AWG wire sizes. Female gender, bellowed style, straight mounting. Ideal for assembly products with finish thickness of 30 units.
Median Price
$0.204
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.093
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.185
$0.158
$0.151
Adafruit Industries
$0.208
Arrow
$0.272
$0.186
$0.142
Newark
$0.303
Distrelec
$0.354
$0.150
DigiKey
$0.370
$0.220
$0.175
Element14
$0.406
$0.242
$0.192
$0.176
Mouser Electronics
$0.181
Avnet
Master Electronics
$0.180
Verical
$0.170
TTI
$0.149
TTI Europe
$0.160
Chip1Stop
$0.211
$0.205
$0.200
RS (Exports)
$0.145
Heilind Electronics
Interstate Connecting
$0.239
Digiode
$0.088
Freelance Electronics
$0.110
$0.116
$0.109
Nova Conductors
Rapid Electronics
$849.260
IBS Electronics
$0.157
Q Components
Vyrian
Rutronik
$0.120
VNN
FDH Electronics
Corphita
$0.084
Semicontronic
$0.172
$0.168
$0.167
Argo Parts USA
$0.198
Advanced Electronics
Continental Prestige Electronics
$0.353
$0.148
Andel Nordic
$5.734
$5.505
Aztec Data Supply Inc.
$6.509
Authorized Procurement Solutions
Assy Fe
EMSNET (Excess)
GreenTree Electronics
Netroflash
$0.194
$0.190
The 30 finish thickness of this product provides durability and reliability for long-lasting performance.
The crimp terminal type ensures a secure and stable connection, making it ideal for various assemblies.
The contact assembly item name ensures easy identification and compatibility with other components.
With a minimum wire size of 20 AWG, this product is suitable for a wide range of wiring applications.
The maximum wire size of 18 AWG allows for flexibility in wire compatibility, making it versatile for different projects.
The female contact gender ensures proper mating and compatibility with male connectors for seamless connections.
The straight mounting style offers a simple and effective installation process for convenience and ease of use.
The bellowed type contact style provides enhanced protection and performance in harsh environments.
Assembly Products 33001-2004 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
33001-2004 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Mult Devs Material Supplier 17/Aug/2021
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Goodwork Semiconductor
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Plessey Semiconductors Discrete Components Div
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
43030-0002
Molex
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
2411-002-1805
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
12124075
Aptiv
Aptiv's 12124075 CONTACT features FEMALE gender, CRIMP terminal type, and 0.079-0.094 inch cable entry. Ideal for STRAIGHT mounting in Assembly Products, with COMPRESSION contact style and 0.224" terminal length.
13697414
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;
M24308/26-2F
Itt Cannon
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SCREWLOCK; Material: STEEL; MIL Conformity: YES;
64320-1301
CONNECTOR ACCESSORY; Assembly Item Name: CAP ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
39-00-0218
The Molex 39-00-0218 CONTACT is a FEMALE CRIMP terminal with SQUARE PIN-SOCKET style, ideal for 16 AWG wires. Made of PHOSPHOR BRONZE, it has a 0.217" length and STRAIGHT mounting style. Perfect for various Assembly Products applications.
1060-20-0222
TE Connectivity 1060-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current, and operates b/w -55 to 125 °C. Ideal for power applications requiring male gender contacts with 0.051-0.085 inch cable entry.
HBL60CM31
Hubbell
CONNECTOR ACCESSORY;
221-523/000-004
Wago
TERMINAL BLOCK ACCESSORY;
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
HKP-F413
Honda Tsushin Kogyo
HKP-F413 by Honda Tsushin Kogyo is a female contact assembly product with a finish thickness of 4. It features crimp terminals, loose contact design, and square pin-socket style. Ideal for applications requiring straight mounting, it accommodates wire sizes from 28 AWG to 24 AWG using phosphor bronze material.
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
DF13-3032SCF
DF13-3032SCF by Hirose Electric is a CRIMP terminal with POLYAMIDE insulator. Rated for 150V AC, it has a contact resistance of 30 mohm and can handle up to 1A current. Ideal for applications requiring FEMALE contacts, such as in UL-approved assemblies operating b/w -35°C to 85°C.
7810.6569.0
500798001
Molex 500798001 is a UL-approved assembly product with finish thickness of 35.43µm. It features crimp terminal type, rated for 2A at 125V AC/DC. Ideal for applications like 51021 housing with female contact gender and blade pin-skt design.
50217-9001
The Molex 50217-9001 is a female contact with crimp terminal type for 51067 SERIES HOUSING. It supports wire sizes from 24 AWG to 18 AWG, with 0.055" to 0.118" cable entry. The contact design features a square pin-socket made of brass, suitable for straight mounting applications.
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
AT60-202-20141
Amphenol
3200014
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Material: COPPER ALLOY; DIN Conformity: NO; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33000-1002
The Molex 33000-1002 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can operate in temperatures ranging from -40 to 105°C. Suitable for wire sizes b/w 20-16 AWG, with a contact resistance of 8 mΩ and rated DC voltage of 500V.
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
33000-1004
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
33000-0002
CONNECTOR ACCESSORY; Minimum Wire Size: 20 AWG; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel; Rated DC Voltage: 500 V; DIN Conformity: NO;
33000-1001
The Molex 33000-1001 is a male contact assembly product for MX150 connectors. It features crimp terminals, rated at 22A and 500V DC, with a contact resistance of 8 mohm. Suitable for use in applications requiring a max wire size of 14 AWG and operating temperatures ranging from -40 to 105°C.
33000-0001
CONNECTOR ACCESSORY; Rated Current: 22 A; Assembly Item Name: CONTACT; Maximum Operating Temperature: 105 Cel; Usage: MX150 CONNECTOR; Mounting Style: STRAIGHT;
33001-2003
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG; IEC Conformity: NO; Finish Thickness: 30;
33000-0003
CONNECTOR ACCESSORY; Rated Current: 10 A; Material: COPPER ALLOY; DIN Conformity: NO; Usage: MX150 CONNECTOR; Additional Features: CONTACT FINISH: TIN OVER NICKEL;
33000-0004
33001-2021
CONNECTOR ACCESSORY; Finish Thickness: 30; Contact Style: BELLOWED TYPE; Terminal Type: CRIMP; MIL Conformity: NO; Mounting Style: STRAIGHT;
33001-2005
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Assembly Item Name: CONTACT; IEC Conformity: NO; Mounting Style: STRAIGHT; Terminal Type: CRIMP;
33001-5003
33001-0003
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); MIL Conformity: NO; Contact Style: COMPRESSION; Contact Gender: FEMALE;
33001-1004
CONNECTOR ACCESSORY; DIN Conformity: NO; Terminal Type: CRIMP; Maximum Wire Size: 16 AWG; Assembly Item Name: CONTACT; Contact Style: COMPRESSION;
33001-2022
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Minimum Wire Size: 20 AWG; Finish Thickness: 30; Mounting Style: STRAIGHT;
33001-2023
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Contact Style: BELLOWED TYPE; Finish Thickness: 30; IEC Conformity: NO; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89);
33001-3005
Molex 33001-3005 CONTACT features CRIMP terminal type, FEMALE gender, and BELLOWED contact style. Ideal for 22 AWG wire in STRAIGHT mounting applications.
33001-3022
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; IEC Conformity: NO; Minimum Wire Size: 20 AWG; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG;
33001-3023
CONNECTOR ACCESSORY; Additional Features: MATING: GOLD OVER NICKEL (89), TERMINATION: TIN (157) OVER NICKEL (89); Contact Gender: FEMALE; DIN Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved