Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-66399-0 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a 0.6 mm2 cross section area, rated for 13A current, with wire sizes ranging from 24 to 20 AWG. Ideal for power and signal applications with female contact gender.
Median Price
$0.811
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Avnet
1+ parts
$0.367
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$0.694
$0.465
Arrow
$0.750
$0.643
$0.579
$0.571
Farnell
$0.489
$0.401
$0.393
Interstate Connecting
$0.770
$0.646
$0.610
Chip1Stop
$0.847
$0.556
$0.538
$0.535
Heilind Electronics
$0.853
$0.696
$0.675
Mouser Electronics
$0.990
$0.775
$0.658
$0.519
TE Connectivity
$0.920
$0.870
$0.820
Newark
$1.010
$0.782
$0.587
$0.561
RS (Exports)
$1.090
$0.930
$0.860
DigiKey
$1.170
$0.845
$0.718
$0.664
Element14
$0.875
$0.805
Powell Electronics
$1.864
Master Electronics
$0.466
$0.444
Future Electronics
$0.435
$0.415
Verical
$0.502
TTI
$0.720
Distrelec
Nova Conductors
$0.463
DF Sales Co.
$0.480
TME
$0.697
$0.604
IBS Electronics
$1.087
$0.653
$0.623
Electro Sonic
$0.756
$0.583
$0.511
NAC Semi
$0.779
Vyrian
VNN
Prism Electronics
SPM Sales
Cyclops Electronics Ltd
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Continental Prestige Electronics
$0.461
$0.414
These connectors are compatible with CPC/G and M Series connectors, allowing for easy and secure connections.
The 100 finish thickness provides durability and protection, ensuring a long-lasting and reliable connection.
Crimp terminals provide a secure and stable connection between the wire and connector, reducing the risk of signal loss or disconnection.
With a high maximum operating temperature of 90°C, this connector is suitable for a wide range of environments and applications.
The low minimum operating temperature of -55°C ensures reliable performance even in cold conditions.
Compatible with 20 AWG wire gauge, this connector is ideal for high current applications.
With a rated current of 13 A, this connector can handle high power loads without overheating or degrading performance.
Constructed from brass, a durable and conductive material, this connector ensures a reliable and long-lasting connection.
Assembly Products 1-66399-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-66399-0 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
3030527
Phoenix Contact
CONNECTOR ACCESSORY;
50394-8100
Molex
Molex 50394-8100 is a crimp terminal with a contact design of loose and bellowed contact style. It has a finish thickness of 15 and is commonly used in assembly products for applications requiring female contacts, straight mounting style, and 0.093 inch terminal length.
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
AWM-12P
Amphenol
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Wire Gauge (AWG): 0; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
221-505/000-004
Wago
TERMINAL BLOCK ACCESSORY;
13697408
Aptiv
Aptiv 13697408 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.0551-0.0748 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
DF1B-2428SCA
Hirose Electric
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
DF22A-1416SCFA
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
50217-9101
Molex 50217-9101 is a female contact with square pin-socket style, made of brass. It is designed for 51067 series housing with crimp terminal type. Suitable for wire sizes ranging from 24 AWG to 18 AWG, with min cable entry of 0.055" and max of 0.118".
929939-3
TE Connectivity 929939-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 130°C, suitable for wire sizes ranging from 20 to 17 AWG. With a rated current of 30A, it's commonly used in assembly products for female contacts.
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
7-1452665-1
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
39-00-0082
The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.
AT60-204-12141
560124-0101
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-66361-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 90 Cel; MIL Conformity: NO; DIN Conformity: NO; Cable Types: DISCRETE WIRE;
1663682
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE;
1-66361-4
TE Connectivity 1-66361-4 is a CPC/VDE connector with crimp terminals, suitable for wire gauges 14-18 AWG. It has a rated current of 25A and can operate b/w -55 to 150°C. Ideal for power and signal applications, featuring male contacts made of copper-nickel alloy.
1-66361-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Minimum Cable Entry: .08 inch; Wire Gauge (AWG): 14;
1-66359-4
TE Connectivity 1-66359-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates b/w -55°C to 90°C, ideal for power and signal applications.
1-66360-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (30); Assembly Item Name: CONTACT; Cross Section Area: 2 mm2;
1-66358-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Usage: CPC/G SERIES/M SERIES CONNECTORS; Cable Types: DISCRETE WIRE; Wire Gauge (AWG): 14; Minimum Operating Temperature: -55 Cel;
1-66358-6
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; IEC Conformity: NO; Material: BRASS; DIN Conformity: NO;
166310-2
TE Connectivity 166310-2 is a CRIMP terminal with 30 finish thickness, rated for 250V and 3A. Ideal for DISCRETE WIRE applications, it features FEMALE contact gender and PHOSPHOR BRONZE material. With operating temperatures from -65 to 105 °C, it suits POWER AND SIGNAL designs.
1-66359-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Wire Gauge (AWG): 14; DIN Conformity: NO; Finish Thickness: 100;
1-66360-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Cable Types: DISCRETE WIRE; Minimum Wire Size: 18 AWG; Maximum Cable Entry: .1 inch;
1-66358-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Maximum Wire Size: 14 AWG;
1663307
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
1663336
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Type: CRIMP; DIN Conformity: NO; Material: BRASS; Contact Style: RND PIN-SKT;
1663990000
Weidmueller & Kg
1-66361-1
TE Connectivity 1-66361-1 is a crimp contact for CPC/G and M series connectors. It has a wire gauge range of 18-14 AWG, rated current of 13A, and operating temperature from -55 to 90°C. Ideal for power and signal applications with male contact gender in straight mounting style.
1663417
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Contact Style: ROUND PIN-SOCKET;
1663611
The Phoenix Contact 1663611 CONTACT is a CRIMP terminal with copper alloy material. It has a max operating temp of 125°C and min of -40°C, suitable for 14 AWG wire. This male round pin contact is EAC approved, ideal for assembly products requiring straight mounting style.
1663255
1-66399-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Wire Size: 24 AWG; IEC Conformity: NO; Finish Thickness: 100; Material: BRASS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved