Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-66358-6 is a crimp contact for CPC/G and M series connectors. It has a wire gauge of 14 AWG, rated current of 13A, and operates b/w -55 to 90°C. Ideal for power and signal applications with female contact gender and brass material.
Median Price
$0.539
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.802
100+ parts
$0.537
1k+ parts
$0.497
10k+ parts
-
Powell Electronics
$0.990
$0.750
RS (Exports)
$1.020
$0.870
$0.810
Newark
$1.030
$0.746
$0.634
DigiKey
$1.120
$0.807
$0.686
TE Connectivity
$1.140
$1.050
$0.980
$0.940
Heilind Electronics
$0.254
Master Electronics
$0.525
$0.455
Verical
$0.617
$0.536
TTI Europe
$0.376
TTI
Arrow
$0.476
Interstate Connecting
$0.274
Future Electronics
$0.395
Mouser Electronics
Farnell
$0.503
$0.454
$0.434
Element14
Chip1Stop
$0.599
Nova Conductors
$0.296
DF Sales Co.
$0.354
Electro Sonic
$0.515
$0.440
IBS Electronics
$0.551
$0.538
Rapid Electronics
Vyrian
NAC Semi
FDH Electronics
VNN
Semtec, LLC
Semicontronic
$0.217
$0.212
$0.210
Argo Parts USA
$0.288
Allen Electronics Distributors
$0.600
$0.570
Aztec Data Supply Inc.
$5.120
Perfect Parts
EMSNET (Excess)
GreenTree Electronics
Abacus Technologies
Kepictronics
Authorized Procurement Solutions
Assy Fe
Glotronic Ltd.
Continental Prestige Electronics
$0.495
$0.417
Eastek
These connectors are suitable for use in a wide range of applications, providing versatility and flexibility for different projects.
With a sufficient finish thickness of 100, this product offers durability and longevity in various operating conditions.
Crimp terminals are known for providing a secure and reliable connection, ensuring efficient performance of the assembly product.
Being able to withstand high temperatures up to 90°C, this product is suitable for applications where heat resistance is essential.
The ability to operate in low temperatures down to -55°C ensures this product can be used in diverse environments without performance issues.
With a rated current of 13A, this product can handle moderate levels of electrical current, making it suitable for power and signal applications.
Assembly Products 1-66358-6 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-66358-6 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - 66358 Drawing Correction 30/May/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Semiconductor Technology
1393366-1
TE Connectivity's 1393366-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 11A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40 to 125°C.
M23053/16-003-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
35021-1160
Molex
Molex 35021-1160 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and RIGHT ANGLE mounting style. Ideal for use with 35022-00, 35023-00, and 68418 assemblies. Supports wire sizes from 28 AWG to 22 AWG with a 0.074 inch cable entry.
967067-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
3030174
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO;
770520-1
TE Connectivity 770520-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 8A current, and operates b/w -40 to 125 °C. Ideal for applications requiring FEMALE contact gender, ROUND PIN-SOCKET style in straight mounting.
16-02-0077
CONNECTOR ACCESSORY;
DE24657R
Japan Aviation Electronics Industry
CONNECTOR ACCESSORY; Manufacturer Series: DE24657R;
AWP-4S
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: WEDGE LOCK; Usage: ATP06; DIN Conformity: NO; Material: POLYETHYLENE;
M23053/5-103-9
Alpha Wire
ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
12048159
Aptiv
The Aptiv 12048159 is a CRIMP CONTACT with MALE gender and BLADE PIN-SOCKET style. It has a min cable entry of 0.08" and max cable entry of 0.123". Ideal for applications requiring straight mounting, such as automotive or industrial assemblies.
1053002300
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
183025-1
TE Connectivity's 183025-1 is a CRIMP terminal with a wire gauge range of 18 AWG to 15 AWG. It has a max operating temperature of 125°C and can handle a rated current of 14 A. This CONTACT assembly product, made of PHOSPHOR BRONZE, is commonly used in connectors for various applications.
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
CC79L-2024-01-L
Samtec
The Samtec CC79L-2024-01-L contact features a loose design with finish thickness of 10. Made of phosphor bronze, it accommodates wire sizes ranging from 20 AWG to 24 AWG. Ideal for assembly products, this contact is suitable for various applications requiring reliable electrical connections.
0800886
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;
W12S-P012
TE Connectivity's W12S-P012 is a POWER AND SIGNAL WEDGE LOCK with max. operating temp of 125°C and min. of -55°C. Supports wire size up to 0 AWG, made of POLYBUTYLENE TEREPHTHALATE. Ideal for assembly applications requiring secure power and signal connections in various environments.
RM16M23K
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 16; Contact Resistance: 3 mohm; Contact Style: ROUND PIN-SOCKET; Maximum Wire Size: 16 AWG;
16-02-0078
M23053/5-108-0
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1663682
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE;
1-66361-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 90 Cel; MIL Conformity: NO; DIN Conformity: NO; Cable Types: DISCRETE WIRE;
1-66361-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Minimum Cable Entry: .08 inch; Wire Gauge (AWG): 14;
1-66361-4
TE Connectivity 1-66361-4 is a CPC/VDE connector with crimp terminals, suitable for wire gauges 14-18 AWG. It has a rated current of 25A and can operate b/w -55 to 150°C. Ideal for power and signal applications, featuring male contacts made of copper-nickel alloy.
1-66360-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (30); Assembly Item Name: CONTACT; Cross Section Area: 2 mm2;
1-66358-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Usage: CPC/G SERIES/M SERIES CONNECTORS; Cable Types: DISCRETE WIRE; Wire Gauge (AWG): 14; Minimum Operating Temperature: -55 Cel;
1-66359-4
TE Connectivity 1-66359-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates b/w -55°C to 90°C, ideal for power and signal applications.
1-66358-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Maximum Wire Size: 14 AWG;
1663336
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Type: CRIMP; DIN Conformity: NO; Material: BRASS; Contact Style: RND PIN-SKT;
1-66359-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Wire Gauge (AWG): 14; DIN Conformity: NO; Finish Thickness: 100;
1-66359-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; Minimum Wire Size: 18 AWG; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO;
1663433
The Phoenix Contact 1663433 is a CRIMP terminal CONTACT with FEMALE gender and BRASS material. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly applications requiring reliable electrical connections in various industries.
1663705
The Phoenix Contact 1663705 is a CRIMP terminal with approvals from GOST and UL. It features a max operating temperature of 125°C and min of -40°C, suitable for applications requiring FEMALE contacts with 12 AWG wire size. Ideal for use in straight mounting styles, this CONTACT is made of COPPER ALLOY for durability.
1-66331-4
TE Connectivity 1-66331-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 90°C. Ideal for power and signal applications with female contact gender.
1-66359-9
CONNECTOR ACCESSORY; Rated Current: 25 A; Terminal Type: CRIMP; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Operating Temperature: -55 Cel;
1-66360-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Cable Types: DISCRETE WIRE; Minimum Wire Size: 18 AWG; Maximum Cable Entry: .1 inch;
1663307
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
1-66332-4
TE Connectivity 1-66332-4 is a CRIMP CONTACT for CPC/G and M SERIES connectors. It has a 0.6 mm2 cross section area, rated at 13A current, suitable for 20-24 AWG wires. Ideal for POWER AND SIGNAL applications with BRASS material and male contact gender.
Tyco Electronics Amp
CONNECTOR ACCESSORY; Terminal Type: CRIMP; MIL Conformity: NO; Material: PHOSPHOR BRONZE; DIN Conformity: NO; Assembly Item Name: CONTACT;
1-66359-7
CONNECTOR ACCESSORY; Rated Current: 25 A; Wire Gauge (AWG): 14; Maximum Operating Temperature: 150 Cel; Finish Thickness: 100; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved