Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
Median Price
$0.063
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.103
100+ parts
$0.098
1k+ parts
10k+ parts
-
Distrelec
$0.228
$0.087
$0.065
Verical
$0.068
PEI Genesis
Powell Electronics
NEP Electronics
$0.044
Master Electronics
$0.054
Mouser Electronics
$0.066
Heilind Electronics
$0.043
TTI Europe
$0.057
Avnet
RS (Exports)
$0.178
$0.152
TTI
$0.059
Interstate Connecting
$0.050
Chip1Stop
Farnell
$0.046
$0.045
Element14
$0.127
$0.113
$0.104
Sager
Newark
$0.102
Bürklin Elektronik
$0.030
PSC Electronics
TestEquity
DF Sales Co.
$0.064
Digiode
$0.089
Nova Conductors
$0.095
Maritex
$0.211
$0.138
$0.110
$0.107
IBS Electronics
$0.048
Jameco Electronics
Vyrian
Sensible Micro Corp
Rutronik
$0.023
Semtec, LLC
MISTER SPROCKETS
Bristol Electronics
Q Components
NAC Semi
Elcom Components
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
VNN
Semicontronic
$0.025
$0.024
Corphita
$0.085
Argo Parts USA
$0.094
$0.091
Modulus Dynamics
$0.100
J3
Advanced Electronics
Continental Prestige Electronics
$0.191
$0.076
Aztec Data Supply Inc.
$5.715
Perfect Parts
EMSNET (Excess)
Assy Fe
GreenTree Electronics
Kepictronics
Benley Electronics
Netroflash
$0.093
$0.090
$0.088
Robosynatics
$0.096
Lucentia Tech
The 15 finish thickness provides durability and longevity to the product.
The crimp terminal type ensures a secure and reliable connection.
The chain contact design allows for smooth and efficient electrical conductivity.
The assembly item name "CONTACT" clearly identifies the purpose of the product.
The 30 AWG minimum wire size allows for compatibility with a wide range of wires.
The 22 AWG maximum wire size ensures compatibility with thicker wires.
The 0.062 inch maximum cable entry provides flexibility for various cable sizes.
The female contact gender allows for compatibility with male counterparts.
The straight mounting style offers easy installation and alignment.
The compression contact style ensures a strong and secure connection.
The brass material provides excellent conductivity and durability.
The 0.186 inch terminal length allows for easy connections and fitment.
Assembly Products 08-55-0101 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-55-0101 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
Semtech
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
HKP-F413
Honda Tsushin Kogyo
HKP-F413 by Honda Tsushin Kogyo is a female contact assembly product with a finish thickness of 4. It features crimp terminals, loose contact design, and square pin-socket style. Ideal for applications requiring straight mounting, it accommodates wire sizes from 28 AWG to 24 AWG using phosphor bronze material.
SPH-004T-P0.5S
J S T Mfg
SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.
5226
Keystone Electronics
CONNECTOR ACCESSORY;
1766245-1
TE Connectivity's 1766245-1 is a male power contact with solder terminal type, rated for 35A current. Made of brass, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting with wire sizes up to 0 AWG.
33000-1003
Molex
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
M23053/5-106-9
Insultab
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE;
W12S-P012
TE Connectivity's W12S-P012 is a POWER AND SIGNAL WEDGE LOCK with max. operating temp of 125°C and min. of -55°C. Supports wire size up to 0 AWG, made of POLYBUTYLENE TEREPHTHALATE. Ideal for assembly applications requiring secure power and signal connections in various environments.
DF14-2628SCFA
Hirose Electric
DF14-2628SCFA by Hirose Electric is a 1A contact with crimp terminal type. It has a rated AC voltage of 150V and operating temperature range from -35 to 85°C. Ideal for discrete wire applications, featuring bellowed type contact style and phosphor bronze material for durability.
0800886
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;
SXA-01T-P0.6
SXA-01T-P0.6 by J S T Mfg is a CRIMP terminal CONTACT for XM SERIES CONNECTOR. It supports 24-20 AWG wires, rated at 3A and 250V AC/DC. With a temperature range of -25 to 85 °C, it's ideal for applications requiring FEMALE contacts with 0.059-0.075 inch cable entry.
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
1061200000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Approvals (V): UL; Material: GLASS FILLED PA66; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Assembly Item Name: END BRACKET;
1053001100
350551-6
The TE Connectivity 350551-6 is a universal mate-n-lok plug/socket housing with stranded construction and crimp terminals. Rated for 600V AC/DC, it has a max temp of 105°C and min temp of -55°C. With approvals from CSA and VDE, it's ideal for power applications with wire sizes ranging from 20-14 AWG.
WM-12S
TE Connectivity's WM-12S, part of Assembly Products, is designed for DTM SERIES applications. With a temperature range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a POWER AND SIGNAL WEDGE ITEM.
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-55-0102
Molex 08-55-0102 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for FEMALE contacts in STRAIGHT mounting applications.
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
08-55-0131
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; Maximum Wire Size: 22 AWG; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: GOLD FLASH OVER NICKEL (50); Finish Thickness: 30; MIL Conformity: NO;
08-55-0104
CONNECTOR ACCESSORY; MIL Conformity: NO; Terminal Type: CRIMP; IEC Conformity: NO; Material: BRASS; Additional Features: CONTACT FINISH: GOLD OVER NICKEL (30);
08-55-0129
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Terminal Type: CRIMP; Maximum Wire Size: 24 AWG; Assembly Item Name: CONTACT; MIL Conformity: NO;
08-55-0130
Molex 08-55-0130 contact features crimp terminal type, chain contact design, and compression style. Ideal for applications requiring female contacts with wire sizes ranging from 30 to 22 AWG. Suitable for straight mounting with a max cable entry of 0.062 inch.
08-55-0103
Molex 08-55-0103 is a CRIMP terminal with BRASS material, suitable for 2139, 3001, 3069 SERIES HOUSING. It supports wire sizes from 24 AWG to 18 AWG and has a 0.118 inch max cable entry. The FEMALE contact has a 0.213 inch length and STRAIGHT mounting style.
08-55-0105
CONNECTOR ACCESSORY; IEC Conformity: NO; Terminal Length: .213 inch; Minimum Wire Size: 26 AWG; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30);
08-55-0106
CONNECTOR ACCESSORY; Minimum Wire Size: 26 AWG; Contact Design: LOOSE; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30); IEC Conformity: NO;
08-55-0121
CONNECTOR ACCESSORY; Maximum Cable Entry: .065 inch; Material: BRASS; Maximum Wire Size: 22 AWG; DIN Conformity: NO; Contact Gender: FEMALE;
08-55-0132
CONNECTOR ACCESSORY; Minimum Wire Size: 26 AWG; Terminal Type: CRIMP; Terminal Length: .213 inch; Contact Style: COMPRESSION; Mounting Style: STRAIGHT;
08-55-0126
CONNECTOR ACCESSORY; Contact Design: CHAIN; DIN Conformity: NO; Terminal Length: .186 inch; Maximum Cable Entry: .062 inch; IEC Conformity: NO;
08-55-0127
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT;
08-55-0128
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved