Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-55-0130 contact features crimp terminal type, chain contact design, and compression style. Ideal for applications requiring female contacts with wire sizes ranging from 30 to 22 AWG. Suitable for straight mounting with a max cable entry of 0.062 inch.
Median Price
$0.374
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
100+ parts
$0.260
1k+ parts
$0.203
10k+ parts
-
DigiKey
$0.660
$0.430
$0.338
Verical
$0.140
Master Electronics
$0.393
TTI
Chip1Stop
$0.251
Element14
$0.292
Mouser Electronics
$0.437
$0.426
Nova Conductors
$0.293
Digiode
$0.627
IBS Electronics
$0.295
TME
$0.105
Vyrian
VNN
Semicontronic
$0.076
$0.074
Aranea Global
$0.287
$0.275
Argo Parts USA
$0.284
Continental Prestige Electronics
Advanced Electronics
$0.299
J3
$0.351
Corphita
$0.594
Aztec Data Supply Inc.
$5.786
Perfect Parts
EMSNET (Excess)
S.R.D Solutions
Kepictronics
Authorized Procurement Solutions
Having a thickness of 30 ensures durability and long-lasting performance for the product.
Crimp terminals provide a secure connection between wires, reducing the risk of connectivity issues.
The chain contact design offers reliable and consistent electrical connectivity, ideal for various applications.
The contact assembly item name indicates that this product is specifically designed for establishing connections.
Support for a minimum wire size of 30 AWG ensures compatibility with smaller gauge wires, providing versatility in usage.
With support for wire sizes up to 22 AWG, this product can accommodate a wide range of wire thicknesses for various applications.
The maximum cable entry size of 0.062 inch allows for easy installation and connection with different cable sizes.
The female contact gender is compatible with male connectors, ensuring a secure and reliable connection.
The straight mounting style provides a simple and easy installation process for the product.
Compression contact style ensures a tight and secure connection, minimizing the risk of signal loss or electrical interference.
Made of brass, a durable and conductive material, ensuring long-term performance and reliability.
The terminal length of 0.186 inch provides ample space for secure wire connections, reducing the risk of accidental disconnection.
Assembly Products 08-55-0130 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-55-0130 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
AWM-3S
Amphenol
CONNECTOR ACCESSORY;
12045773
Aptiv
Aptiv 12045773 CONTACT is a MALE CRIMP terminal with 0.067-0.109" cable entry. It has a STRAIGHT mounting style, 0.315" terminal length, and is made of NONFERROUS material. Ideal for assembly products requiring precise male contact connections.
HKP-F413
Honda Tsushin Kogyo
HKP-F413 by Honda Tsushin Kogyo is a female contact assembly product with a finish thickness of 4. It features crimp terminals, loose contact design, and square pin-socket style. Ideal for applications requiring straight mounting, it accommodates wire sizes from 28 AWG to 24 AWG using phosphor bronze material.
F22891-000
TE Connectivity
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
2170704-5
TE Connectivity's 2170704-5 is a QSFP28 cable assembly with UL approval. It features compliant fit terminals, operating from -40 to 85°C. Designed for signal transmission, it uses nickel silver alloy material and supports up to 0 AWG wire size.
2832991
Phoenix Contact
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Manufacturer Series: 2832991; DIN Conformity: NO; Assembly Item Name: PROTECTIVE CAP;
02-08-1001
Molex 02-08-1001 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in Assembly Products for STRAIGHT mounting applications.
A3B-2630SCC
Hirose Electric
A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.
SA3348/1
Bulgin
1SNK908302R0000
TE Connectivity's 1SNK908302R0000, made of POLYAMIDE, operates b/w -55 to 110 °C with a max AC/DC voltage of 600 V. It supports up to 0 AWG wire size and handles a rated current of 57 A. Ideal for various assembly applications requiring high voltage and current capabilities.
500798020
The Molex 500798020 assembly product features UL approval, crimp terminal type, and a max operating temperature of 105°C. It is used for the 51021 HOUSING application with contact design CHAIN and rated AC voltage of 125V.
593708000
The Molex 593708000 CONTACT is a CRIMP type terminal with CHAIN contact design. It supports wire sizes from 28 AWG to 22 AWG and has a max cable entry of 0.059 inch. Ideal for use in the 51216 SERIES applications requiring FEMALE contact gender and STRAIGHT mounting style with SQUARE PIN-SOCKET contact design made of PHOSPHOR BRONZE material.
CP-MSTB
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: CODING ITEM; MIL Conformity: NO;
0462-201-2031
TE Connectivity's 0462-201-2031 CONTACT features CRIMP terminal type, MACHINED contact design, and COPPER ALLOY material. With a rated current of 7.5A, it is ideal for applications requiring FEMALE contact gender and wire gauge up to 20 AWG. Operating temperature ranges from -55°C to 150°C make it suitable for various assembly products.
WP-4S
CONNECTOR ACCESSORY; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; DIN Conformity: NO; Usage: DTP SERIES;
SSHL-003T-P0.2
J S T Mfg
SSHL-003T-P0.2 by J S T Mfg is a CRIMP terminal with POLYBUTYLENE TEREPHTHALATE insulator, suitable for wire and discrete cable types. It has a contact resistance of 40 mohm, rated current of 1 A, and operates b/w -25 to 85 °C. Ideal for signal applications requiring FEMALE contacts with SQUARE PIN-SOCKET design.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
5-965906-1
TE Connectivity's 5-965906-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 7.5 A. Ideal for applications requiring a female contact gender, it operates b/w -40 to 120 °C temperature range.
1-329631-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; DIN Conformity: NO; Usage: BNC CONNECTOR; IEC Conformity: NO; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-55-0102
Molex 08-55-0102 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for FEMALE contacts in STRAIGHT mounting applications.
08-55-0101
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
08-55-0131
CONNECTOR ACCESSORY; Contact Style: COMPRESSION; Maximum Wire Size: 22 AWG; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: GOLD FLASH OVER NICKEL (50); Finish Thickness: 30; MIL Conformity: NO;
08-55-0104
CONNECTOR ACCESSORY; MIL Conformity: NO; Terminal Type: CRIMP; IEC Conformity: NO; Material: BRASS; Additional Features: CONTACT FINISH: GOLD OVER NICKEL (30);
08-55-0129
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Terminal Type: CRIMP; Maximum Wire Size: 24 AWG; Assembly Item Name: CONTACT; MIL Conformity: NO;
08-55-0103
Molex 08-55-0103 is a CRIMP terminal with BRASS material, suitable for 2139, 3001, 3069 SERIES HOUSING. It supports wire sizes from 24 AWG to 18 AWG and has a 0.118 inch max cable entry. The FEMALE contact has a 0.213 inch length and STRAIGHT mounting style.
08-55-0123
CONNECTOR ACCESSORY; Material: BRASS; Mounting Style: STRAIGHT; DIN Conformity: NO; Minimum Cable Entry: .65 inch; IEC Conformity: NO;
08-55-0137
CONNECTOR ACCESSORY; Minimum Wire Size: 26 AWG; Mounting Style: STRAIGHT; Maximum Wire Size: 22 AWG; Finish Thickness: 30; Assembly Item Name: CONTACT;
08-55-0121
CONNECTOR ACCESSORY; Maximum Cable Entry: .065 inch; Material: BRASS; Maximum Wire Size: 22 AWG; DIN Conformity: NO; Contact Gender: FEMALE;
08-55-0132
CONNECTOR ACCESSORY; Minimum Wire Size: 26 AWG; Terminal Type: CRIMP; Terminal Length: .213 inch; Contact Style: COMPRESSION; Mounting Style: STRAIGHT;
08-55-0126
CONNECTOR ACCESSORY; Contact Design: CHAIN; DIN Conformity: NO; Terminal Length: .186 inch; Maximum Cable Entry: .062 inch; IEC Conformity: NO;
08-55-0127
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT;
08-55-0128
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved