Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-66361-3 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates in temperatures from -55 to 90°C, ideal for power and signal applications.
Median Price
$0.818
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
RS Americas
1+ parts
100+ parts
$0.622
1k+ parts
$0.499
10k+ parts
-
DigiKey
$1.140
$0.826
$0.702
$0.658
RS (Exports)
$1.160
$0.990
$0.920
Newark
$1.230
$0.883
$0.779
$0.671
Master Electronics
$1.470
Verical
$0.570
$0.560
Chip1Stop
$0.687
$0.588
Powell Electronics
Farnell
$0.646
DF Sales Co.
$0.320
Nova Conductors
$0.483
IBS Electronics
$1.317
$1.059
$0.897
TME
$0.625
$0.532
Vyrian
Rapid Electronics
$0.585
VNN
Argo Parts USA
$0.443
$0.429
Continental Prestige Electronics
$0.434
Aranea Global
$0.474
$0.455
Advanced Electronics
$0.493
Semicontronic
$0.530
$0.517
$0.514
Allen Electronics Distributors
$0.674
$0.527
Aztec Data Supply Inc.
$3.930
Assy Fe
Kepictronics
Perfect Parts
Compatible with a variety of connectors, providing flexibility in usage.
Durable finish thickness ensures long-lasting performance.
Crimped terminals ensure secure connections for reliable performance.
Allows for easy insertion of cables with small diameters.
Can withstand high temperatures, suitable for a range of environments.
Can operate in extreme cold conditions without compromising performance.
Compatible with 14 AWG wire, commonly used in power and signal applications.
Optimal cross-sectional area for efficient electrical conductivity.
Can accommodate smaller wire sizes for versatile connections.
Can handle larger wire sizes for heavier-duty applications.
Suitable for applications requiring a maximum current rating of 13 A.
Compatible with discrete wire types, offering compatibility with various cable configurations.
Allows for insertion of slightly larger cables for increased flexibility.
Designed for male contacts, ensuring compatibility with corresponding female connectors.
Suitable for both power and signal applications, providing versatility in usage.
Straight mounting style for easy installation and connection.
Constructed with durable brass material for reliable performance and longevity.
Assembly Products 1-66361-3 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-66361-3 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
DF22A-1416SCFA
Hirose Electric
CONNECTOR ACCESSORY;
9025770000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: FERRULE-STRAIGHT; Approvals (V): CSA; GOST; UL;
M300-0010045
Harwin Plc
Harwin PLC's M300-0010045 CONTACT features CRIMP terminal type, 175°C max operating temp, -65°C min operating temp. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and ROUND PIN-SOCKET contact style. Supports wire sizes from 20 AWG to 18 AWG with a rated current of 10 A.
SVH-21T-P1.1
J S T Mfg
SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.
16-02-0114
Molex
281934-2
TE Connectivity
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
1053438
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
AT62-14-0122
Amphenol
350689-1
TE Connectivity 350689-1 is a universal mate-n-lok plug and cap housing with crimp terminals. Rated for 600V, it supports wire gauge from 24 to 18 AWG and rated current of 19A. Ideal for power applications with approvals from CSA, UL, VDE.
5-66506-3
TE Connectivity 5-66506-3 is a male signal contact with brass material. It has a finish thickness of 30, supports wire gauge up to 20 AWG, and operates b/w -55°C to 105°C. Ideal for applications requiring crimp terminals with 0.05" to 0.06" cable entry.
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
293727-1
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
13697415
Aptiv
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
DZ5CE003
Schneider Electric Sa
DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.
1-1393310-8
CONNECTOR ACCESSORY; Manufacturer Series: 1393310;
0800886
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;
5-963715-1
TE Connectivity 5-963715-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, cross section area of 0.75 mm2, and rated current of 7.5 A. Ideal for applications requiring female contact gender and operating temperatures ranging from -40 to 120 °C.
3595
Keystone Electronics
Assembly Items;
963530-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1663682
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE;
1-66361-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Minimum Cable Entry: .08 inch; Wire Gauge (AWG): 14;
1-66361-4
TE Connectivity 1-66361-4 is a CPC/VDE connector with crimp terminals, suitable for wire gauges 14-18 AWG. It has a rated current of 25A and can operate b/w -55 to 150°C. Ideal for power and signal applications, featuring male contacts made of copper-nickel alloy.
1-66360-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (30); Assembly Item Name: CONTACT; Cross Section Area: 2 mm2;
1-66358-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Usage: CPC/G SERIES/M SERIES CONNECTORS; Cable Types: DISCRETE WIRE; Wire Gauge (AWG): 14; Minimum Operating Temperature: -55 Cel;
1-66358-6
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; IEC Conformity: NO; Material: BRASS; DIN Conformity: NO;
1-66359-4
TE Connectivity 1-66359-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates b/w -55°C to 90°C, ideal for power and signal applications.
1-66358-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Maximum Wire Size: 14 AWG;
1663336
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Type: CRIMP; DIN Conformity: NO; Material: BRASS; Contact Style: RND PIN-SKT;
1-66359-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Wire Gauge (AWG): 14; DIN Conformity: NO; Finish Thickness: 100;
1-66359-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; Minimum Wire Size: 18 AWG; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO;
1663433
The Phoenix Contact 1663433 is a CRIMP terminal CONTACT with FEMALE gender and BRASS material. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly applications requiring reliable electrical connections in various industries.
1663705
The Phoenix Contact 1663705 is a CRIMP terminal with approvals from GOST and UL. It features a max operating temperature of 125°C and min of -40°C, suitable for applications requiring FEMALE contacts with 12 AWG wire size. Ideal for use in straight mounting styles, this CONTACT is made of COPPER ALLOY for durability.
1-66331-4
TE Connectivity 1-66331-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 90°C. Ideal for power and signal applications with female contact gender.
1-66359-9
CONNECTOR ACCESSORY; Rated Current: 25 A; Terminal Type: CRIMP; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Operating Temperature: -55 Cel;
1-66360-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Cable Types: DISCRETE WIRE; Minimum Wire Size: 18 AWG; Maximum Cable Entry: .1 inch;
1663307
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
1-66332-4
TE Connectivity 1-66332-4 is a CRIMP CONTACT for CPC/G and M SERIES connectors. It has a 0.6 mm2 cross section area, rated at 13A current, suitable for 20-24 AWG wires. Ideal for POWER AND SIGNAL applications with BRASS material and male contact gender.
Tyco Electronics Amp
CONNECTOR ACCESSORY; Terminal Type: CRIMP; MIL Conformity: NO; Material: PHOSPHOR BRONZE; DIN Conformity: NO; Assembly Item Name: CONTACT;
1-66361-1
TE Connectivity 1-66361-1 is a crimp contact for CPC/G and M series connectors. It has a wire gauge range of 18-14 AWG, rated current of 13A, and operating temperature from -55 to 90°C. Ideal for power and signal applications with male contact gender in straight mounting style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved