Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-66359-1 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, with wire gauge support from 18 to 14 AWG. Designed for power and signal applications, it can handle up to 13A current at temperatures ranging from -55°C to 150°C.
Median Price
$0.624
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.814
100+ parts
$0.642
1k+ parts
$0.560
10k+ parts
$0.494
DigiKey
$1.080
$0.779
$0.662
-
TE Connectivity
$1.320
$1.200
$1.110
Master Electronics
$1.270
Newark
PEI Genesis
Verical
$0.530
Farnell
$0.509
Powell Electronics
Chip1Stop
$0.142
$0.141
$0.140
Nova Conductors
$0.870
IBS Electronics
$1.559
$0.572
Rapid Electronics
$0.429
TME
$0.475
Electro Sonic
$1.250
$1.213
$0.445
VNN
Semicontronic
$0.121
$0.118
$0.117
Continental Prestige Electronics
$0.853
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$2.395
Perfect Parts
Assy Fe
These connectors are compatible with a wide range of CPC and M Series connectors, offering versatility and compatibility with various devices and systems.
The finish thickness of 100 ensures durability and long-lasting performance of the product, making it a reliable choice for assembly projects.
Crimp terminals provide a secure connection between the wires and the connector, ensuring efficient and stable electrical connections.
With a high maximum operating temperature of 150°C, this product can withstand high temperatures without compromising its performance.
The low minimum operating temperature of -55°C ensures the product can perform effectively in cold environments without any issues.
The 14 AWG wire gauge ensures compatibility with standard wire sizes and allows for efficient power and signal transmission.
The CONTACT assembly item name indicates that this product is specifically designed for establishing contacts and connections, making it suitable for a wide range of assembly applications.
With a rated current of 13 A, this product can handle high current loads, making it perfect for applications that require efficient power transmission.
Phosphor bronze material offers excellent conductivity and durability, ensuring reliable connections and long-lasting performance of the product.
Assembly Products 1-66359-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-66359-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
D38999/33F11R
CONNECTOR ACCESSORY; Shell Sizes: 11; Maximum Operating Temperature: 175 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Material: METAL;
39-00-0073
Molex
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
97-3057-1012-1(689)
Amphenol
CONNECTOR ACCESSORY;
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
09200030301
Harting Electronics & Kg
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: HOUSING; Maximum Operating Temperature: 125 Cel;
5054311100
13711548
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CONTACT; Minimum Cable Entry: .0669 inch; Cable Types: FLRY-B; Material: COPPER ALLOY;
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
3025163
Phoenix Contact
The Phoenix Contact 3025163 is a steel CLAMPING ITEM with EN and IEC approvals. It has a min cable entry of 0.118" and max cable entry of 0.315". Ideal for securing cables in industrial applications using M4 mounting option.
030-1953-000
Itt Cannon
ITT Cannon's 030-1953-000 contact features crimp terminal type, machined design, and copper alloy material. With approvals from CSA and UL, it is rated for 1000V AC voltage and 5A current. Ideal for applications requiring a female round pin-socket contact with wire sizes ranging from 24 to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
02-06-1103
Molex 02-06-1103 contact features brass material, crimp terminal type, and round pin-socket design. Suitable for applications requiring female contact gender with wire sizes ranging from 24 AWG to 18 AWG. Ideal for assembly products with a min cable entry of 0.06" and max of 1.52".
08-55-0102
Molex 08-55-0102 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for FEMALE contacts in STRAIGHT mounting applications.
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
WP-4S
TE Connectivity's WP-4S is an Assembly Product for DTP SERIES. With a temp range of -55 to 125°C, it supports 0 AWG wires. Designed for POWER AND SIGNAL applications with POLYBUTYLENE TEREPHTHALATE material.
08-70-1030
Molex 08-70-1030 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wires. With 0.051-0.126 inch cable entry, it's ideal for FEMALE connectors in STRAIGHT mounting style. Made of BRASS with SQUARE PIN-SOCKET contact style, it has a 0.197 inch terminal length for secure connections.
M23053/5-106-9
Brady
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
1-66109-7
TE Connectivity 1-66109-7, a crimp terminal for CPC/G and M series connectors, features brass material, 24-26 AWG wire gauge compatibility, and 13A rated current. Ideal for power and signal applications with CSA/UL approvals and operating temperatures from -55 to 90°C.
3200030
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-66359-5
TE
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Contact Gender: MALE; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel;
1663682
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE;
1-66361-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 90 Cel; MIL Conformity: NO; DIN Conformity: NO; Cable Types: DISCRETE WIRE;
1-66361-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Minimum Cable Entry: .08 inch; Wire Gauge (AWG): 14;
1-66361-4
TE Connectivity 1-66361-4 is a CPC/VDE connector with crimp terminals, suitable for wire gauges 14-18 AWG. It has a rated current of 25A and can operate b/w -55 to 150°C. Ideal for power and signal applications, featuring male contacts made of copper-nickel alloy.
1-66360-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (30); Assembly Item Name: CONTACT; Cross Section Area: 2 mm2;
1-66358-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Usage: CPC/G SERIES/M SERIES CONNECTORS; Cable Types: DISCRETE WIRE; Wire Gauge (AWG): 14; Minimum Operating Temperature: -55 Cel;
1-66358-6
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; IEC Conformity: NO; Material: BRASS; DIN Conformity: NO;
1-66359-4
TE Connectivity 1-66359-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates b/w -55°C to 90°C, ideal for power and signal applications.
1-66358-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Maximum Wire Size: 14 AWG;
1663336
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Type: CRIMP; DIN Conformity: NO; Material: BRASS; Contact Style: RND PIN-SKT;
1-66359-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; Minimum Wire Size: 18 AWG; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (50) OVER NICKEL; MIL Conformity: NO;
1663433
The Phoenix Contact 1663433 is a CRIMP terminal CONTACT with FEMALE gender and BRASS material. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly applications requiring reliable electrical connections in various industries.
1663705
The Phoenix Contact 1663705 is a CRIMP terminal with approvals from GOST and UL. It features a max operating temperature of 125°C and min of -40°C, suitable for applications requiring FEMALE contacts with 12 AWG wire size. Ideal for use in straight mounting styles, this CONTACT is made of COPPER ALLOY for durability.
1-66331-4
TE Connectivity 1-66331-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 20 AWG, rated current of 13A, and operates b/w -55 to 90°C. Ideal for power and signal applications with female contact gender.
1-66359-9
CONNECTOR ACCESSORY; Rated Current: 25 A; Terminal Type: CRIMP; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Operating Temperature: -55 Cel;
1-66360-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Cable Types: DISCRETE WIRE; Minimum Wire Size: 18 AWG; Maximum Cable Entry: .1 inch;
1663307
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
1-66332-4
TE Connectivity 1-66332-4 is a CRIMP CONTACT for CPC/G and M SERIES connectors. It has a 0.6 mm2 cross section area, rated at 13A current, suitable for 20-24 AWG wires. Ideal for POWER AND SIGNAL applications with BRASS material and male contact gender.
Tyco Electronics Amp
CONNECTOR ACCESSORY; Terminal Type: CRIMP; MIL Conformity: NO; Material: PHOSPHOR BRONZE; DIN Conformity: NO; Assembly Item Name: CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved