Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 166310-2 is a CRIMP terminal with 30 finish thickness, rated for 250V and 3A. Ideal for DISCRETE WIRE applications, it features FEMALE contact gender and PHOSPHOR BRONZE material. With operating temperatures from -65 to 105 °C, it suits POWER AND SIGNAL designs.
Median Price
$0.424
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Boersig
1+ parts
$0.230
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.471
$0.359
$0.203
Bürklin Elektronik
$0.590
$0.520
$0.460
Conrad
$0.718
$0.632
Mouser Electronics
$0.720
$0.498
$0.444
$0.372
TTI Europe
$0.296
$0.277
DigiKey
$0.340
$0.320
Verical
$0.304
$0.298
Powell Electronics
$0.353
$0.332
Element14
$0.439
$0.368
$0.336
Newark
$0.494
$0.410
$0.399
Farnell
$0.282
$0.280
$0.242
Chip1Stop
Nova Conductors
$0.442
TME
$0.680
$0.479
$0.385
$0.346
Rapid Electronics
$0.457
IBS Electronics
$0.451
$0.420
NAC Semi
$0.398
$0.367
Electro Sonic
$0.343
$0.317
Vyrian
VNN
Corel Iberica Componentes, S.L.
Rebound Electronics
Kepictronics
Abacus Technologies
Assy Fe
Futuretech Components
EMSNET (Excess)
Netroflash
$0.433
$0.411
This product is approved by CSA and UL, ensuring quality and safety compliance.
The 30 finish thickness provides durability and protection against wear and tear.
The crimp terminal design offers a secure and reliable connection.
With a high rated voltage of 250 V, this product is suitable for a wide range of applications.
The high maximum operating temperature of 105°C allows for reliable performance in various environments.
The rated AC voltage of 250 V ensures compatibility with standard power sources.
The low minimum operating temperature of -65°C enables use in extreme cold conditions.
The 26 AWG wire gauge provides flexibility and versatility in wiring setups.
The assembly item name of "CONTACT" indicates its primary function for establishing connections.
The small cross-section area allows for efficient use of space in compact designs.
This product can accommodate wires up to 26 AWG for various wiring configurations.
The 3 A rated current capacity makes this product suitable for low to moderate power applications.
Compatible with discrete wire types, providing flexibility for different wiring setups.
The female contact gender ensures compatibility with corresponding male connectors.
The low contact resistance of 12 mohm helps maintain signal integrity and efficiency.
The design for both power and signal transmission makes this product versatile for multiple applications.
Constructed with durable phosphor bronze material for longevity and reliable performance.
Assembly Products 166310-2 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Approvals (V):
Assembly Item Name:
Cable Types:
Connector Accessory Type:
Contact Gender:
Contact Resistance:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated AC Voltage:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
1SET111002R0000
TE Connectivity
TE Connectivity's 1SET111002R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 20 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
SSH-003GA-P0.2-H
J S T Mfg
J S T Mfg's SSH-003GA-P0.2-H is a CRIMP terminal CONTACT with 32-28 AWG wire size range, rated for 1A current at 50V AC/DC. With approvals from CSA and UL, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts in straight mounting style.
90119-0109
Molex
Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.
500798020
The Molex 500798020 assembly product features UL approval, crimp terminal type, and a max operating temperature of 105°C. It is used for the 51021 HOUSING application with contact design CHAIN and rated AC voltage of 125V.
936012157
CONNECTOR ACCESSORY;
39-00-0040
Molex 39-00-0040 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.051-0.122 inch cable entry, and BRASS material. Ideal for 5559, 30068, 42475 SERIES HOUSING applications with SQUARE PIN-SOCKET contact design.
1766274-1
TE Connectivity's 1766274-1 is a male power contact with copper alloy material, rated for 200A current. It has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting and accommodating up to 0 AWG wire sizes.
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
W12S-P012
TE Connectivity's W12S-P012 is a POWER AND SIGNAL WEDGE LOCK with max. operating temp of 125°C and min. of -55°C. Supports wire size up to 0 AWG, made of POLYBUTYLENE TEREPHTHALATE. Ideal for assembly applications requiring secure power and signal connections in various environments.
Alpha Wire
ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
962835-3
TE Connectivity's 962835-3 is a FEMALE contact assembly product with 0.094" min cable entry and 2.62 mm² cross section area for 17-13 AWG wires. Ideal for DISCRETE WIRE applications, it features STRAIGHT mounting style and PHOSPHOR BRONZE material with 0.146" max cable entry.
50079-8000
The Molex 50079-8000 is an assembly product with a finish thickness of 35, featuring crimp terminal type and chain contact design. It is used with the 51021 housing for female contacts in straight mounting style. The bellowed contact material is made of phosphor bronze, suitable for wire sizes ranging from 28 AWG to 26 AWG.
5-1532137-9
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;
2-929939-1
TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.
M39029/76-425
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Gender: MALE; Mounting Style: STRAIGHT; Maximum Wire Size: 0 AWG; Design: SIGNAL;
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
15305171
Aptiv
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;
5011937000
Molex 5011937000 is a PICO-CLASP CONNECTOR with CRIMP terminals. It has a rated current of 1.5A and can handle up to 50V AC/DC voltage. The contact material is PHOSPHOR BRONZE, suitable for wire sizes ranging from 32-28 AWG in straight mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-66361-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 90 Cel; MIL Conformity: NO; DIN Conformity: NO; Cable Types: DISCRETE WIRE;
1663682
Phoenix Contact
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; MIL Conformity: NO; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE;
1-66361-4
TE Connectivity 1-66361-4 is a CPC/VDE connector with crimp terminals, suitable for wire gauges 14-18 AWG. It has a rated current of 25A and can operate b/w -55 to 150°C. Ideal for power and signal applications, featuring male contacts made of copper-nickel alloy.
1-66361-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Minimum Cable Entry: .08 inch; Wire Gauge (AWG): 14;
1-66359-4
TE Connectivity 1-66359-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for wire sizes ranging from 18 to 14 AWG with a rated current of 13A. Made of brass, it operates b/w -55°C to 90°C, ideal for power and signal applications.
1-66360-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Additional Features: UNDERPLATING THICKNESS (30); Assembly Item Name: CONTACT; Cross Section Area: 2 mm2;
1-66358-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Usage: CPC/G SERIES/M SERIES CONNECTORS; Cable Types: DISCRETE WIRE; Wire Gauge (AWG): 14; Minimum Operating Temperature: -55 Cel;
1-66358-6
CONNECTOR ACCESSORY; Rated Current: 13 A; Cable Types: DISCRETE WIRE; IEC Conformity: NO; Material: BRASS; DIN Conformity: NO;
1-66399-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Wire Size: 24 AWG; Usage: CPC/G SERIES/M SERIES CONNECTORS; Assembly Item Name: CONTACT; MIL Conformity: NO;
1-66359-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Wire Gauge (AWG): 14; DIN Conformity: NO; Finish Thickness: 100;
1-66360-3
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Cable Types: DISCRETE WIRE; Minimum Wire Size: 18 AWG; Maximum Cable Entry: .1 inch;
1-66358-0
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .08 inch; MIL Conformity: NO; Usage: CPC/G SERIES/M SERIES CONNECTORS; Maximum Wire Size: 14 AWG;
1663307
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
1663336
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Type: CRIMP; DIN Conformity: NO; Material: BRASS; Contact Style: RND PIN-SKT;
1663990000
Weidmueller & Kg
1-66361-1
TE Connectivity 1-66361-1 is a crimp contact for CPC/G and M series connectors. It has a wire gauge range of 18-14 AWG, rated current of 13A, and operating temperature from -55 to 90°C. Ideal for power and signal applications with male contact gender in straight mounting style.
1663417
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Contact Style: ROUND PIN-SOCKET;
1663611
The Phoenix Contact 1663611 CONTACT is a CRIMP terminal with copper alloy material. It has a max operating temp of 125°C and min of -40°C, suitable for 14 AWG wire. This male round pin contact is EAC approved, ideal for assembly products requiring straight mounting style.
1663255
166310-3
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 3 A; Approvals (V): CSA; UL; Material: PHOSPHOR BRONZE; Cross Section Area: .15 mm2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved