Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
Median Price
$0.074
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.061
100+ parts
-
1k+ parts
10k+ parts
$0.051
Heilind Electronics
$0.066
$0.053
Master Electronics
$0.068
$0.059
Mouser Electronics
$0.110
$0.080
$0.057
Element14
$0.142
$0.138
$0.134
Arrow
$0.174
$0.097
$0.075
RS Americas
$0.185
$0.124
$0.102
DigiKey
$0.190
$0.108
$0.084
Adafruit Industries
$6.985
$6.636
TTI
$0.047
$0.043
PEI Genesis
NEP Electronics
$0.073
$0.049
Chip1Stop
$0.054
Powell Electronics
$0.064
RS (Exports)
$0.107
Verical
$0.060
Newark
$0.094
$0.076
TTI Europe
$0.042
Farnell
PSC Electronics
DF Sales Co.
$0.020
Digiode
$0.044
TestEquity
$0.070
Nova Conductors
TME
$0.100
Component Electronics Inc.
$0.150
$0.120
Vyrian
NAC Semi
$0.081
Standard Data Resources
Jameco Electronics
VNN
Classic Components Corporation
IBS Electronics
Van Brakel Electronic
R&J Components
Lighthouse Electronics, Inc.
Mil-Aero Solutions, Inc.
Beckwith Electronics
Bristol Electronics
Elcom Components
EMSNET
Speed Components Ltd
Atlantic Semiconductor
A2Z Electronics, Inc.
Bisco
J2 Sourcing AB
Resion
Prism Electronics
Semicontronic
$0.039
$0.038
Corphita
$0.041
Argo Parts USA
Netroflash
$0.078
Continental Prestige Electronics
$0.177
$0.093
$0.079
Benley Electronics
$1.750
Aztec Data Supply Inc.
$1.970
J3
$5.701
Advanced Electronics
Perfect Parts
Assy Fe
Abacus Technologies
Authorized Procurement Solutions
Glotronic Ltd.
EMSNET (Excess)
The thick finish provides durability and protection for the assembly product, ensuring a long lifespan.
Crimp terminals provide a secure connection, reducing the risk of loose connections or electrical faults.
The minimum cable entry size allows for compatibility with a wide range of cable sizes, providing flexibility in usage.
The loose contact design allows for easy installation and removal, making maintenance and repairs convenient.
The specific assembly item name indicates that this product is designed for making electrical contacts, ensuring its suitability for the task.
Being able to accommodate small wire sizes allows for versatility in use cases, catering to a wider range of applications.
The maximum wire size ensures compatibility with thicker wires, making this product suitable for a variety of wiring needs.
The maximum cable entry size allows for compatibility with a range of cable sizes, ensuring versatility in connection options.
The female contact gender is commonly used in electrical connections, ensuring compatibility with a wide range of devices and equipment.
The straight mounting style provides a clean and simple installation process, ensuring stability and secure placement of the assembly product.
Brass is a durable and conductive material, making it a reliable choice for electrical applications, ensuring longevity and efficient performance.
The length of the terminal provides ample space for secure connections, reducing the risk of short circuits or electrical failures.
Assembly Products 08-50-0108 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-50-0108 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Vicor
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
43030-0007
Molex
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
SVF-61T-P2.0
J S T Mfg
SVF-61T-P2.0 by J S T Mfg is a CSA, TUV, UL approved VL connector with crimp terminal type for 20-14 AWG wires. It has a rated current of 20A and can handle up to 600V AC/DC. Ideal for applications requiring female contacts, straight mounting style, and operating temperatures from -25°C to 90°C.
M23053/16-003-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
10757690
Aptiv
CONNECTOR ACCESSORY;
1SET111002R0000
TE Connectivity
TE Connectivity's 1SET111002R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 20 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
1701065
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: PITCH SPACER; MIL Conformity: NO; Manufacturer Series: 1701065; DIN Conformity: NO;
SPH-002T-P0.5S
SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.
W2SB-P012
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Material: POLYBUTYLENE TEREPHTHALATE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
794606-1
TE Connectivity's 794606-1 CONTACT features stranded construction, crimp terminal type, and a rated voltage of 250V. Ideal for discrete wire applications with a wire gauge range from 24 to 20 AWG. Suitable for power design with approvals from CSA, UL, and VDE.
282466-1
TE Connectivity's 282466-1 plug housing has a finish thickness of 236.22µm, supports crimp terminals for wire gauge sizes ranging from 15 AWG to 13 AWG. With a rated current of 14A and operating temperatures from -40°C to 125°C, it is ideal for discrete wire applications requiring female contacts in straight mounting style.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
AT62-201-16141
Amphenol
828904-1
TE Connectivity 828904-1 CONTACT features CRIMP terminal type, 0.047" min cable entry, and -40 to 130°C operating temp range. Ideal for applications requiring STRAIGHT mounting style with 0 AWG wire size compatibility.
5023810000
Molex 5023810000 is a signal contact assembly product with compression-style male contact. It has a rated current of 1A and rated AC/DC voltage of 50V. Designed for use with CLIK-MATE housing, it supports wire sizes from 26-28 AWG and cable entries up to 0.8 inch.
W8P
The TE Connectivity W8P is a wedge item designed for power and signal assemblies in the DT Series. It supports wire sizes up to 0 AWG, with a temperature range from -55°C to 125°C. Made of polybutylene terephthalate, it's ideal for applications requiring high-performance connectivity.
43031-0006
The Molex 43031-0006 contact is designed for use with 43020, 43640, and 44300 assemblies. It features a CRIMP terminal type, CHAIN contact design, and PHOSPHOR BRONZE material. This male contact supports wire sizes from 30 to 26 AWG with a 0.137 inch length for various applications.
39-00-0047
Molex 39-00-0047 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 28 AWG to 22 AWG such as 5557, 30067, and more. Offers a 0.035-0.071 inch cable entry range for versatile use in various assemblies.
DTM06-3S-C017
TE Connectivity's DTM06-3S-C017 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, ideal for POWER AND SIGNAL applications. With an operating temperature range of -55°C to 125°C, it ensures reliable performance in various environments.
216-201
Wago
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Assembly Item Name: FERRULE;
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
08-50-0031
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; DIN Conformity: NO; Contact Gender: FEMALE; Contact Style: COMPRESSION;
08-50-0187
Molex 08-50-0187 is a brass contact with bellowed design for 20-18 AWG wires. It's used in 6442 and 41695 housing assemblies, featuring a 0.1" cable entry and straight mounting style. Ideal for applications requiring female crimp terminals with 0.213" length.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
08-50-0107
Molex 08-50-0107 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.65" cable entry with 26-22 AWG wire sizes. Suitable for straight mounting in assembly products.
08-50-0004
CONNECTOR ACCESSORY; Maximum Cable Entry: .06 inch; Finish Thickness: 200; Mounting Style: STRAIGHT; Material: BRASS; IEC Conformity: NO;
08-50-0134
Molex 08-50-0134 CONTACT features CRIMP terminal type, 0.65" max cable entry, and PHOSPHOR BRONZE material. Ideal for applications requiring FEMALE contact gender, 26-22 AWG wire sizes, and STRAIGHT mounting style.
08-50-0185
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Contact Design: LOOSE; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP;
08-50-0160
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Contact Gender: FEMALE; Finish Thickness: 100; Additional Features: CONTACT FINISH: TIN OVER NICKEL (50); Terminal Type: CRIMP;
08-50-0120
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30); Contact Gender: FEMALE; Usage: 2139, 3001, 3069, 2574, 6422, 41695 SERIES HOUSING; DIN Conformity: NO; Minimum Wire Size: 24 AWG;
08-50-0159
Molex 08-50-0159 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for FEMALE contacts in assemblies with 0.062" cable entry, accepting wire sizes from 30 to 22 AWG. Suitable for applications requiring STRAIGHT mounting and COMPRESSION contact style.
08-50-0116
Molex 08-50-0116 CONTACT features CRIMP terminal type, LOOSE contact design, and BRASS material. Ideal for 20-18 AWG wires with 0.11" cable entry. Used in applications 2574 and 2139 for FEMALE COMPRESSION contacts.
08-50-0136
CONNECTOR ACCESSORY; DIN Conformity: NO; Contact Style: COMPRESSION; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO;
08-50-0112
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; Minimum Wire Size: 26 AWG;
08-50-0124
CONNECTOR ACCESSORY; Maximum Cable Entry: .062 inch; Minimum Wire Size: 30 AWG; DIN Conformity: NO; Contact Style: COMPRESSION; Contact Design: CHAIN;
08-50-0151
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Maximum Cable Entry: .62 inch; Contact Design: LOOSE; DIN Conformity: NO; Contact Style: COMPRESSION;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved