Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-50-0031 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contact gender, straight mounting style, and compression contact style. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 120.
Median Price
$0.040
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.021
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.054
DigiKey
$0.140
$0.072
$0.060
TTI Europe
$0.080
Verical
NEP Electronics
Farnell
$0.043
Powell Electronics
Newark
$0.025
TTI
PEI Genesis
RS (Exports)
$0.023
Chip1Stop
$0.048
Arrow
$0.027
Compona
$0.010
Element14
$0.055
Heilind Electronics
$0.037
Sager
Interstate Connecting
$0.036
Mouser Electronics
Digiode
$0.020
DF Sales Co.
$0.042
Mobius Materials
$0.044
TME
$0.019
Nova Conductors
$0.063
Component Electronics Inc.
$0.090
$0.070
Maritex
$0.099
NAC Semi
Rutronik
$0.009
Vyrian
Martec Srl
IBS Electronics
ICP Electronique
Prism Electronics
Electronics Depot
LIBRA Elektronik GmbH
ABC Electronics Ltd.
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
VNN
Bristol Electronics
Semicontronic
Corphita
Argo Parts USA
$0.053
$0.051
J3
Modulus Dynamics
Advanced Electronics
Aztec Data Supply Inc.
$3.205
EMSNET (Excess)
Abacus Technologies
Assy Fe
Continental Prestige Electronics
$0.067
$0.035
Infinite Electronics LLP (Excess)
Eastek
Kepictronics
Metaverse IC Inc.
Perfect Parts
Authorized Procurement Solutions
ErreBi Group
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Robosynatics
$0.052
Lucentia Tech
Netroflash
$0.062
$0.058
GreenTree Electronics
The thick finish coating provides durability and protection, ensuring a longer lifespan for the product.
Crimped terminals provide a secure and reliable connection, ideal for ensuring proper functionality and reducing the risk of loose connections.
The chain contact design allows for consistent and reliable contact between components, ensuring smooth operation and minimal signal loss.
The specific item name makes it easy to identify and order the correct component for assembly, simplifying the procurement process.
Supports smaller wire sizes, allowing for versatility in use with different types of wires and cables.
Can accommodate thicker wire sizes, providing flexibility in usage applications.
Allows for compatibility with cables of varying thicknesses, making it suitable for a wide range of applications.
The female contact gender is commonly used in electrical connections, providing compatibility with a wide range of male connectors.
The straight mounting style makes installation simpler and ensures a clean and organized setup.
Compression contacts provide a secure and stable connection, reducing the risk of signal interference or loss.
Brass is known for its conductivity and durability, making it a reliable choice for electrical components that require high performance and longevity.
The specified terminal length ensures proper connectivity and secure attachment to other components in the assembly.
Assembly Products 08-50-0031 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-50-0031 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
General Instrument
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Jinan Jingheng Electronics
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Rfe International
08-52-0071
Molex
Molex 08-52-0071 is a CRIMP terminal with PHOSPHOR BRONZE material. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications in various SERIES HOUSING models with 0.11" to 0.118" cable entry.
AT60-202-16141-22
Amphenol
CONNECTOR ACCESSORY;
9025760000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 24 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; MIL Conformity: NO;
0460-202-20141
TE Connectivity
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
SWPR-001T-P025
J S T Mfg
SWPR-001T-P025 by J S T Mfg is a UL approved CONTACT for JWPF SERIES CONNECTOR. It features CRIMP terminal type, 26-22 AWG wire size compatibility, and 3A rated current. Ideal for applications requiring FEMALE contacts with COPPER ALLOY material in STRAIGHT mounting style.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
1-963530-1
5205817-1
TE Connectivity 5205817-1 is a hardware female screwlock for metal shell or all plastic connectors. It supports max wire size of 0 AWG, made of steel, and mounts with #4-40 UNC screws. Ideal for secure assembly in various applications.
221-523/000-004
Wago
TERMINAL BLOCK ACCESSORY;
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
1060-12-0166
TE Connectivity's 1060-12-0166 contact features crimp terminal type, stamped design, and copper alloy material. With a wire gauge of 12 AWG and rated current of 25 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style. Operating temperatures range from -55 to 125°C.
13711544
Aptiv
Aptiv 13711544 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.067-0.083 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
39-00-0220
Molex 39-00-0220 CONTACT features square pin-socket design, made of phosphor bronze. Suitable for 5559, 30068, 42475 SERIES HOUSING with wire sizes ranging from 24 AWG to 18 AWG. Offers 0.051" to 0.122" cable entry and 0.169" terminal length for CRIMP terminals.
FI-C3-A1-15000
Japan Aviation Electronics Industry
FI-C3-A1-15000 by Japan Aviation Electronics features crimp terminal type, operating temp -40 to 80°C, and contact resistance of 40 mohm. Ideal for signal applications with wire sizes ranging from 32 to 28 AWG, rated current of 1A, and female contact gender.
AW3S-1939
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
17790000011
Harting Electronics & Kg
1SNK150051R0000
Abb
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Mounting Style: RIGHT ANGLE;
112263-90
TE Connectivity's 112263-90 is an Assembly Product with HD30 Series Connector. It features Female Contact Gender, Aluminum Material, and supports up to 0 AWG wire size. With a temperature range of -55 to 125°C, it is ideal for various industrial applications.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
08-50-0187
Molex 08-50-0187 is a brass contact with bellowed design for 20-18 AWG wires. It's used in 6442 and 41695 housing assemblies, featuring a 0.1" cable entry and straight mounting style. Ideal for applications requiring female crimp terminals with 0.213" length.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
08-50-0107
Molex 08-50-0107 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.65" cable entry with 26-22 AWG wire sizes. Suitable for straight mounting in assembly products.
08-50-0004
CONNECTOR ACCESSORY; Maximum Cable Entry: .06 inch; Finish Thickness: 200; Mounting Style: STRAIGHT; Material: BRASS; IEC Conformity: NO;
08-50-0134
Molex 08-50-0134 CONTACT features CRIMP terminal type, 0.65" max cable entry, and PHOSPHOR BRONZE material. Ideal for applications requiring FEMALE contact gender, 26-22 AWG wire sizes, and STRAIGHT mounting style.
08-50-0185
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Contact Design: LOOSE; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP;
08-50-0160
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Contact Gender: FEMALE; Finish Thickness: 100; Additional Features: CONTACT FINISH: TIN OVER NICKEL (50); Terminal Type: CRIMP;
08-50-0120
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30); Contact Gender: FEMALE; Usage: 2139, 3001, 3069, 2574, 6422, 41695 SERIES HOUSING; DIN Conformity: NO; Minimum Wire Size: 24 AWG;
08-50-0159
Molex 08-50-0159 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for FEMALE contacts in assemblies with 0.062" cable entry, accepting wire sizes from 30 to 22 AWG. Suitable for applications requiring STRAIGHT mounting and COMPRESSION contact style.
08-50-0116
Molex 08-50-0116 CONTACT features CRIMP terminal type, LOOSE contact design, and BRASS material. Ideal for 20-18 AWG wires with 0.11" cable entry. Used in applications 2574 and 2139 for FEMALE COMPRESSION contacts.
08-50-0045
CONNECTOR ACCESSORY; Finish Thickness: 100; Contact Gender: FEMALE; Minimum Cable Entry: .1 inch; Additional Features: CONTACT FINISH: TIN; DIN Conformity: NO;
08-50-0061
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Finish Thickness: 200; MIL Conformity: NO; DIN Conformity: NO; Minimum Cable Entry: .65 inch;
08-50-0062
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; DIN Conformity: NO; Terminal Length: .213 inch; Terminal Type: CRIMP;
08-50-0011
CONNECTOR ACCESSORY; Terminal Length: .21 inch; Finish Thickness: 100; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .11 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved