Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-50-0134 CONTACT features CRIMP terminal type, 0.65" max cable entry, and PHOSPHOR BRONZE material. Ideal for applications requiring FEMALE contact gender, 26-22 AWG wire sizes, and STRAIGHT mounting style.
Median Price
$0.086
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.041
100+ parts
-
1k+ parts
10k+ parts
$0.036
Interstate Connecting
$0.048
$0.040
Newark
$0.113
$0.084
$0.064
RS Americas
$0.121
$0.092
$0.074
Mouser Electronics
$0.130
$0.094
$0.080
DigiKey
$0.190
$0.096
$0.081
$0.067
Element14
$0.202
$0.118
PEI Genesis
Chip1Stop
$0.052
Farnell
$0.072
$0.063
RS (Exports)
TTI Europe
$0.070
Powell Electronics
Verical
$0.127
PSC Electronics
Digiode
$0.042
DF Sales Co.
$0.068
Nova Conductors
TME
$0.090
Component Electronics Inc.
$0.150
$0.120
$0.100
Bristol Electronics
$0.375
$0.188
$0.131
Jameco Electronics
IBS Electronics
$0.035
Vyrian
VNN
Greenchips
A2Z Electronics, Inc.
Prism Electronics
Resion
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Extreme Components
Microfarads
Powertech Controls
Van Brakel Electronic
EMSNET
Bisco
ZD Integrated Circuits Inc.
Corphita
Argo Parts USA
$0.061
$0.059
Bastille Electronics
$0.076
$0.071
Continental Prestige Electronics
Aztec Data Supply Inc.
$7.391
Assy Fe
Perfect Parts
Authorized Procurement Solutions
Glotronic Ltd.
EMSNET (Excess)
GreenTree Electronics
Speed Components Ltd (Excess)
Standard Data Resources (Excess)
The 100 finish thickness provides durability and longevity, making this product a reliable choice for assembly projects.
The crimp terminal type ensures secure connections, making this product ideal for applications where reliable conductivity is essential.
With a minimum cable entry of 0.65 inch, this product offers versatility in compatible cable sizes, making it suitable for a variety of wiring setups.
The loose contact design allows for easy installations and replacements, enhancing the user experience and saving time on assembly processes.
The assembly item name clearly identifies its purpose, making it easy to find and select for specific assembly tasks.
Supporting a minimum wire size of 26 AWG, this product is suitable for projects requiring finer gauge wires, ensuring compatibility with a variety of applications.
With a maximum wire size of 22 AWG, this product offers flexibility in wire gauge options, accommodating a range of wiring requirements.
The maximum cable entry of 0.65 inch allows for compatibility with larger cable sizes, providing versatility for different wiring setups.
The female contact gender ensures compatibility with corresponding male connectors, making this product suitable for a variety of assembly configurations.
The straight mounting style simplifies installation and alignment, making this product a convenient choice for straightforward assembly setups.
Constructed with phosphor bronze, this product offers excellent conductivity and durability, making it a reliable choice for longevity and performance.
The 0.213 inch terminal length provides a secure connection point for wires, ensuring stable and reliable connections in assembly projects.
Assembly Products 08-50-0134 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-50-0134 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
Bytesonic Electronics
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SWPR-001T-P025
J S T Mfg
SWPR-001T-P025 by J S T Mfg is a UL approved CONTACT for JWPF SERIES CONNECTOR. It features CRIMP terminal type, 26-22 AWG wire size compatibility, and 3A rated current. Ideal for applications requiring FEMALE contacts with COPPER ALLOY material in STRAIGHT mounting style.
87421-0000
Molex
Molex 87421-0000 CONTACT features CRIMP terminal type, FEMALE gender, and 0.098" terminal length. Ideal for 26 AWG wire in assembly product applications like 87439 with STRAIGHT mounting style.
348462-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 180 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
SPH-002T-P0.5L
SPH-002T-P0.5L by J S T Mfg is a PAD SERIES CONNECTOR with CRIMP terminals, rated for 3A at 250V AC/DC. It has a contact resistance of 20 mohm and operates b/w -25°C to 85°C. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 28 AWG to 24 AWG.
AW2S-C
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: AW2S-C;
282403-1
TE Connectivity's 282403-1 plug housing has a finish thickness of 236.22, crimp terminal type, and operates b/w -40 to 125 °C. Ideal for discrete wire applications, it accommodates wire sizes from 22 to 20 AWG with a rated current of 6A.
33012-3002
The Molex 33012-3002 is a crimp terminal contact for MX150 connectors. It has a temperature range of -40 to 105°C, with wire sizes from 20 to 18 AWG. The female contact has a resistance of 8 mΩ and can handle up to 500V DC, making it ideal for various assembly applications.
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
N3505-2B
3m Electronic Products Division
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -55 Cel; Approvals (V): UL; IEC Conformity: NO;
0460-202-1631
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
1SNA199336R2000
TERMINAL BLOCK ACCESSORY;
221-505/000-004
Wago
77138-101LF
Amphenol Communications Solutions
Amphenol's 77138-101LF CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and BELLOWED CONTACT style. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 30 AWG to 26 AWG.
590
Keystone Electronics
Keystone Electronics 590 is a male contact with compression style, made of steel. It features right angle mounting and solder terminal type, with a length of 0.12". Ideal for assembly products requiring durable connections in tight spaces.
249-116
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO; Usage: TERMINAL BLOCK;
DT06-12SC-C017
TE Connectivity's DT06-12SC-C017 is a power and signal assembly product with a rated voltage of 250V and a max operating temperature of 125°C. With a rated current of 13A, it is designed for applications requiring female contact gender and can handle up to 250V DC voltage.
DTM06-12SB-EE04
TE Connectivity's DTM06-12SB-EE04 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 150°C. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.
1SNK900001R0000
TE Connectivity's 1SNK900001R0000 is a UL-approved terminal block with insulator material POLYAMIDE. It has a wide operating temperature range (-55 to 110 °C) and supports wire sizes up to 0 AWG. Ideal for various assembly applications requiring secure wire connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
08-50-0031
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; DIN Conformity: NO; Contact Gender: FEMALE; Contact Style: COMPRESSION;
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
08-50-0187
Molex 08-50-0187 is a brass contact with bellowed design for 20-18 AWG wires. It's used in 6442 and 41695 housing assemblies, featuring a 0.1" cable entry and straight mounting style. Ideal for applications requiring female crimp terminals with 0.213" length.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
08-50-0107
Molex 08-50-0107 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.65" cable entry with 26-22 AWG wire sizes. Suitable for straight mounting in assembly products.
08-50-0004
CONNECTOR ACCESSORY; Maximum Cable Entry: .06 inch; Finish Thickness: 200; Mounting Style: STRAIGHT; Material: BRASS; IEC Conformity: NO;
08-50-0185
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Contact Design: LOOSE; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP;
08-50-0160
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Contact Gender: FEMALE; Finish Thickness: 100; Additional Features: CONTACT FINISH: TIN OVER NICKEL (50); Terminal Type: CRIMP;
08-50-0120
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30); Contact Gender: FEMALE; Usage: 2139, 3001, 3069, 2574, 6422, 41695 SERIES HOUSING; DIN Conformity: NO; Minimum Wire Size: 24 AWG;
08-50-0159
Molex 08-50-0159 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for FEMALE contacts in assemblies with 0.062" cable entry, accepting wire sizes from 30 to 22 AWG. Suitable for applications requiring STRAIGHT mounting and COMPRESSION contact style.
08-50-0116
Molex 08-50-0116 CONTACT features CRIMP terminal type, LOOSE contact design, and BRASS material. Ideal for 20-18 AWG wires with 0.11" cable entry. Used in applications 2574 and 2139 for FEMALE COMPRESSION contacts.
08-50-0111
CONNECTOR ACCESSORY; Minimum Wire Size: 26 AWG; DIN Conformity: NO; Contact Gender: FEMALE; Finish Thickness: 100; Terminal Type: CRIMP;
08-50-0112
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; Minimum Wire Size: 26 AWG;
08-50-0133
Molex 08-50-0133 contact features crimp terminal type, chain contact design, and compression style. Ideal for applications requiring female contacts with wire sizes ranging from 26 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 100 and made of phosphor bronze material.
08-50-0183
CONNECTOR ACCESSORY; Contact Design: CHAIN; Terminal Type: CRIMP; Minimum Wire Size: 26 AWG; Additional Features: CONTACT FINISH: TIN; Maximum Wire Size: 22 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved