Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-50-0120 is a CRIMP terminal with BRASS material, suitable for 2139, 3001, 3069 SERIES HOUSING. Features 0.11" min cable entry, 0.118" max cable entry, and accepts wire sizes from 24 AWG to 18 AWG. Ideal for applications requiring FEMALE contact gender and STRAIGHT mounting style.
Median Price
$0.160
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.103
100+ parts
-
1k+ parts
10k+ parts
$0.084
Mouser Electronics
$0.117
$0.099
$0.091
DigiKey
$0.240
$0.137
$0.107
Digiode
$0.105
Vyrian
$0.111
VNN
Bristol Electronics
$1.313
$0.735
Nova Conductors
Corphita
$0.100
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Perfect Parts
This product is compatible with a variety of housing series, providing versatility and compatibility for different applications.
The 150 finish thickness provides durability and protection, ensuring a long-lasting and reliable product.
Crimp terminals are known for their secure connection and ease of installation, making this product user-friendly and reliable.
The minimum cable entry size allows for compatibility with small cables, providing flexibility in usage and installation.
The loose contact design allows for easy maintenance and repair, ensuring hassle-free operation of the product.
The contact assembly item ensures proper electrical connections, making this product an essential component for various applications.
The minimum wire size compatibility caters to smaller wire gauges, offering versatility in wiring options for different projects.
The maximum wire size compatibility allows for use with thicker wire gauges, accommodating a wide range of wiring needs.
The maximum cable entry size provides flexibility for using larger cables, ensuring compatibility with various cable sizes.
The female contact gender offers compatibility with male connectors, making this product suitable for different connection configurations.
The straight mounting style allows for easy integration into different setups, offering a simple and straightforward installation process.
Brass material is known for its durability and conductivity, ensuring a reliable and long-lasting product.
The terminal length provides enough room for secure connections, ensuring proper functionality and performance of the product.
Assembly Products 08-50-0120 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
08-50-0120 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Sangdest Microelectronics (Nanjing)
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Sensitron Semiconductor
Continental Device India
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Weitronic Enterprise
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
87116-2
TE Connectivity
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; MIL Conformity: NO; Material: NYLON66; Assembly Item Name: KEYING ITEM;
MINI-SSHL-002T-P0.2
J S T Mfg
MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.
114017-ZZ
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Assembly Item Name: SEALING ITEM; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; MIL Conformity: NO;
39-00-0022
Molex
Molex 39-00-0022 CONTACT features CRIMP terminals for 24-18 AWG wires, with 0.051-0.126 inch cable entry. Made of PHOSPHOR BRONZE, it has a 0.197" length and SQUARE PIN-SOCKET style. Ideal for FEMALE contacts in Assembly Products applications.
AT60-16-0122
Amphenol
CONNECTOR ACCESSORY;
108-2
Keystone Electronics
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; MIL Conformity: NO; Terminal Type: SOLDER;
2270024-1
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Wire Gauge (AWG): 12; Maximum Wire Size: 12 AWG;
W4P
W4P by TE Connectivity is an assembly product for the DT SERIES, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wire sizes up to 0 AWG. Made of polybutylene terephthalate, it is ideal for various industrial and automotive electrical connections.
DF11-22SC
Hirose Electric
770520-1
TE Connectivity 770520-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 8A current, and operates b/w -40 to 125 °C. Ideal for applications requiring FEMALE contact gender, ROUND PIN-SOCKET style in straight mounting.
1201578
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Insulator Material: POLYAMIDE; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RAIL ADAPTER;
43031-0008
Molex 43031-0008 CONTACT features CRIMP terminal type, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for use with 24-20 AWG wires in applications like 43020, 43640, and 44300 assemblies.
20824050001
Harting Electronics & Kg
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
DF1B-2428SCA
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
66570-8
TE Connectivity 66570-8 is a male signal contact with solder terminal type. It has a max operating temperature of 105°C and min of -55°C. Suitable for CPC connectors and Amplimite HDP-20, it features a finish thickness of 30 microns, wire gauge up to 18 AWG, and rated current of 3.1A.
16-02-0107
M23053/16-003-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
M23053/16-004-0
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO;
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
08-50-0031
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; DIN Conformity: NO; Contact Gender: FEMALE; Contact Style: COMPRESSION;
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
08-50-0187
Molex 08-50-0187 is a brass contact with bellowed design for 20-18 AWG wires. It's used in 6442 and 41695 housing assemblies, featuring a 0.1" cable entry and straight mounting style. Ideal for applications requiring female crimp terminals with 0.213" length.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
08-50-0107
Molex 08-50-0107 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.65" cable entry with 26-22 AWG wire sizes. Suitable for straight mounting in assembly products.
08-50-0004
CONNECTOR ACCESSORY; Maximum Cable Entry: .06 inch; Finish Thickness: 200; Mounting Style: STRAIGHT; Material: BRASS; IEC Conformity: NO;
08-50-0134
Molex 08-50-0134 CONTACT features CRIMP terminal type, 0.65" max cable entry, and PHOSPHOR BRONZE material. Ideal for applications requiring FEMALE contact gender, 26-22 AWG wire sizes, and STRAIGHT mounting style.
08-50-0185
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Contact Design: LOOSE; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP;
08-50-0160
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Contact Gender: FEMALE; Finish Thickness: 100; Additional Features: CONTACT FINISH: TIN OVER NICKEL (50); Terminal Type: CRIMP;
08-50-0159
Molex 08-50-0159 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for FEMALE contacts in assemblies with 0.062" cable entry, accepting wire sizes from 30 to 22 AWG. Suitable for applications requiring STRAIGHT mounting and COMPRESSION contact style.
08-50-0116
Molex 08-50-0116 CONTACT features CRIMP terminal type, LOOSE contact design, and BRASS material. Ideal for 20-18 AWG wires with 0.11" cable entry. Used in applications 2574 and 2139 for FEMALE COMPRESSION contacts.
08-50-0119
CONNECTOR ACCESSORY; DIN Conformity: NO; Material: BRASS; Maximum Cable Entry: .118 inch; Terminal Type: CRIMP; Terminal Length: .213 inch;
08-50-0146
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Usage: 2139 SERIES CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Maximum Wire Size: 18 AWG;
08-50-0147
CONNECTOR ACCESSORY; Terminal Length: .213 inch; Contact Gender: FEMALE; DIN Conformity: NO; Contact Design: LOOSE; Terminal Type: CRIMP;
08-50-0112
CONNECTOR ACCESSORY; Contact Design: LOOSE; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; Minimum Wire Size: 26 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved