Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-50-0133 contact features crimp terminal type, chain contact design, and compression style. Ideal for applications requiring female contacts with wire sizes ranging from 26 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 100 and made of phosphor bronze material.
Median Price
$0.033
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Arrow
1+ parts
$0.054
100+ parts
$0.023
1k+ parts
$0.019
10k+ parts
-
DigiKey
$0.100
$0.044
$0.037
Element14
$0.140
$0.074
$0.062
Adafruit Industries
$7.433
$6.764
$6.095
Newark
Powell Electronics
$0.020
Master Electronics
$0.038
Verical
$0.026
Heilind Electronics
Chip1Stop
$0.032
Mouser Electronics
NEP Electronics
TTI
$0.028
TTI Europe
Interstate Connecting
$0.024
RS (Exports)
$0.055
$0.049
TestEquity
DF Sales Co.
$0.021
Nova Conductors
$0.030
Digiode
$0.051
Component Electronics Inc.
$0.080
$0.060
$0.050
Freelance Electronics
$0.188
$0.197
$0.186
TME
IBS Electronics
Inventory MP
Vyrian
EMSNET
SPM Sales
VNN
Elcom Components
Bristol Electronics
Mil-Aero Solutions, Inc.
Q Components
Aranea Global
$0.029
Corphita
Advanced Electronics
Perfect Parts
Assy Fe
Glotronic Ltd.
Kepictronics
Authorized Procurement Solutions
The 100 finish thickness ensures durability and longevity of the product, making it a reliable choice for assembly projects.
The crimp terminal type provides a secure and strong connection, making it ideal for ensuring stable electrical connections in assemblies.
The chain contact design offers reliable continuity and conductivity, making this product a dependable choice for assembly tasks.
The contact assembly item name emphasizes the importance of this component in ensuring smooth functionality, making it essential for assembly projects.
With a minimum wire size of 26 AWG, this product can accommodate smaller wires, allowing for flexibility in various assembly applications.
The maximum wire size of 22 AWG ensures compatibility with thicker wires, making this product versatile for different assembly needs.
The maximum cable entry of 0.065 inch allows for easy installation and secure connections, enhancing the convenience and efficiency of assembly tasks.
The female contact gender offers compatibility with various male connectors, making this product a versatile choice for assembly projects.
The straight mounting style provides a simple and easy installation process, enhancing the user-friendliness of this product for assembly tasks.
The compression contact style ensures a reliable and secure connection, making this product a dependable choice for assembly projects.
Constructed with phosphor bronze material, this product offers excellent conductivity and durability, making it a high-quality option for assembly tasks.
The 0.213 inch terminal length provides ample space for secure wire connections, making this product a practical choice for assembly projects.
Assembly Products 08-50-0133 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
08-50-0133 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Multiple Devices Production 16/Apr/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Synsemi
Panjit International
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Promax-johnton
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
13711548
Aptiv
Aptiv 13711548 CONTACT features FEMALE gender, CRIMP terminal type, and COPPER ALLOY material. Ideal for FLRY-B cable types with 0.0669-0.0827 inch cable entry. Used in Assembly Products applications.
39-00-0079
Molex
Molex 39-00-0079 is a crimp terminal with square pin-socket contact design. It supports up to 16 AWG wire size and 0.122" cable entry, ideal for 5557, 30067, 42474, and 44516 series housing applications. Made of phosphor bronze with a finish thickness of 35, it features female contact gender and straight mounting style.
030-1952-000
Itt Cannon
The ITT Cannon 030-1952-000 is a male contact assembly product with a crimp terminal type. It has a max operating temperature of 105°C and is rated for AC voltage up to 1000V. This contact is made of copper alloy and is commonly used in applications requiring a round pin-socket contact design.
AW12S
Amphenol
AW12S by Amphenol is an assembly product designed for AT series connectors. It has a temperature range of -55°C to 125°C, with polyethylene material. Supports wire sizes from 20 AWG to 14 AWG, making it ideal for various industrial applications.
794606-1
TE Connectivity
TE Connectivity's 794606-1 CONTACT features stranded construction, crimp terminal type, and a rated voltage of 250V. Ideal for discrete wire applications with a wire gauge range from 24 to 20 AWG. Suitable for power design with approvals from CSA, UL, and VDE.
C88E000209M3S
Northern Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Usage: CM CONNECTOR; Mounting Option-1: M3;
057105-000
CONNECTOR ACCESSORY;
HBL60CM31
Hubbell
AT62-201-2031
C88E000209
Mh Connectors
C88E000209 by Mh Connectors is a BACKSHELL assembly product made of ZINC. It has a max operating temperature of 90°C and a min operating temperature of -25°C. It can be mounted using JACK SCREW or 4-40, making it suitable for various applications requiring secure connections in challenging environments.
DF1B-2022SCF
Hirose Electric
The Hirose Electric DF1B-2022SCF is a CRIMP terminal CONTACT with FEMALE gender and SQ PIN-SKT style. Made of BRASS, it is used in STRAIGHT mounting applications. Ideal for assembly products requiring reliable electrical connections.
2411-001-2405
TE Connectivity 2411-001-2405 nut item for HDP Series Size 24 assemblies. Features include max operating temp of 125°C, min operating temp of -55°C, and contact gender female. Ideal for use with 0 AWG wire due to glass-filled PEI material.
AWM-4P
9028240000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
13711542
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
0460-010-20141
TE Connectivity's 0460-010-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 16-18 AWG wires at 7.5A current. Ideal for male connectors in straight mounting applications.
1658670-1
TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.
207445-3
TE Connectivity's 207445-3 is a RECEPTACLE with Shell Sizes of 17. It can operate b/w -55 to 105°C, accommodating wire sizes up to 0 AWG. Made of POLYETHYLENE, it's ideal for various Assembly Products applications.
39-00-0217
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
08-50-0031
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Mounting Style: STRAIGHT; DIN Conformity: NO; Contact Gender: FEMALE; Contact Style: COMPRESSION;
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
08-50-0187
Molex 08-50-0187 is a brass contact with bellowed design for 20-18 AWG wires. It's used in 6442 and 41695 housing assemblies, featuring a 0.1" cable entry and straight mounting style. Ideal for applications requiring female crimp terminals with 0.213" length.
08-50-0189
Molex 08-50-0189 is a brass contact with crimp terminal type for 20-18 AWG wires. It has a 0.1 inch cable entry and is used in 6442 and 41695 housing assemblies. The bellowed female contact design features a straight mounting style, ideal for various assembly products.
08-50-0107
Molex 08-50-0107 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.65" cable entry with 26-22 AWG wire sizes. Suitable for straight mounting in assembly products.
08-50-0134
Molex 08-50-0134 CONTACT features CRIMP terminal type, 0.65" max cable entry, and PHOSPHOR BRONZE material. Ideal for applications requiring FEMALE contact gender, 26-22 AWG wire sizes, and STRAIGHT mounting style.
08-50-0116
Molex 08-50-0116 CONTACT features CRIMP terminal type, LOOSE contact design, and BRASS material. Ideal for 20-18 AWG wires with 0.11" cable entry. Used in applications 2574 and 2139 for FEMALE COMPRESSION contacts.
08-50-0185
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Contact Design: LOOSE; Assembly Item Name: CONTACT; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP;
08-50-0109
08-50-0109 by Molex is a power compression contact with a rated AC voltage of 250V and a max current of 5A. It is designed for use in crimp housings (41696) and can accommodate wire sizes ranging from 18 AWG to 22 AWG.
08-50-0004
CONNECTOR ACCESSORY; Maximum Cable Entry: .06 inch; Finish Thickness: 200; Mounting Style: STRAIGHT; Material: BRASS; IEC Conformity: NO;
08-50-0160
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Contact Gender: FEMALE; Finish Thickness: 100; Additional Features: CONTACT FINISH: TIN OVER NICKEL (50); Terminal Type: CRIMP;
08-50-0120
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN OVER NICKEL (30); Contact Gender: FEMALE; Usage: 2139, 3001, 3069, 2574, 6422, 41695 SERIES HOUSING; DIN Conformity: NO; Minimum Wire Size: 24 AWG;
08-50-0159
Molex 08-50-0159 CONTACT features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for FEMALE contacts in assemblies with 0.062" cable entry, accepting wire sizes from 30 to 22 AWG. Suitable for applications requiring STRAIGHT mounting and COMPRESSION contact style.
08-50-0136
CONNECTOR ACCESSORY; DIN Conformity: NO; Contact Style: COMPRESSION; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO;
08-50-0183
CONNECTOR ACCESSORY; Contact Design: CHAIN; Terminal Type: CRIMP; Minimum Wire Size: 26 AWG; Additional Features: CONTACT FINISH: TIN; Maximum Wire Size: 22 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved