Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's B84112B0000B060 EMI Mains Filter is UL, CSA, and ENEC-10 approved with a rated voltage of 250V. With dimensions of L63.5xB50.8xH28.6 (mm), it has a max leakage current of 0.5mA and can handle a rated current of 6A. Ideal for single-phase EMI filtering applications in various electronic devices due to its high pot rating of 2700V.
Median Price
$48.690
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$33.120
100+ parts
$26.020
1k+ parts
-
10k+ parts
Mouser Electronics
$43.210
$33.370
DigiKey
$46.610
$33.378
Newark
$50.770
$43.150
Bürklin Elektronik
$51.470
$43.190
$41.960
Element14
$62.480
$51.460
Distrelec
Verical
Nova Conductors
$42.315
TME
$48.460
Vyrian
VNN
AZTECH Wire
$12.804
Ampacity Inc.
$28.250
Netroflash
$40.199
$39.353
Authorized Procurement Solutions
Perfect Parts
Having approvals from UL, CSA, and ENEC-10 ensures that this EMI mains filter meets high safety and quality standards.
With a rated voltage of 250V, this EMI mains filter is suitable for use in a wide range of applications.
Being a single-phase EMI filter, this product effectively suppresses electromagnetic interference for better performance of connected equipment.
With a width of 50.8mm, this EMI mains filter can easily fit into various setups and configurations.
Operating at 50/60Hz, this EMI mains filter is compatible with standard power systems.
Having a length of 63.5mm, this EMI mains filter is compact and space-saving.
With a high pot rating of 2700V, this EMI mains filter can withstand high voltage levels, ensuring reliable performance.
With a maximum leakage current of 0.5mA, this EMI mains filter efficiently prevents excess current flow, improving safety.
Featuring panel mount installation, this EMI mains filter can be easily integrated into various systems.
Measuring L63.5XB50.8XH28.6 (mm), this EMI mains filter is compact and versatile for different applications.
With a rated current of 6A, this EMI mains filter is suitable for handling moderate power loads.
Having a height of 28.6mm, this EMI mains filter is low-profile and can be installed in tight spaces.
EMI Mains Filters B84112B0000B060 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
General Semiconductor
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
RN202-0.3-02
Schaffner Holding Ag
RN202-0.3-02 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It has UL and VDE approvals, making it suitable for various applications requiring EMI mains filtering.
1000APS12L
TE Connectivity
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
10VW1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 65 dB;
SCF-05-350
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 15 mm; Maximum Operating Temperature: 65 Cel; Dimensions: L15.0XB12.0XH15.0 (mm)/L0.591XB0.472XH0.591 (inch); Minimum Operating Temperature: -25 Cel;
SSR21NH-031810
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm;
SSB11V-R17043
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Additional Features: INDUCTANCE 4.3 MILLI HENRY; Maximum Operating Temperature: 363 Cel; Operating Frequency (Hz): 50Hz; No. of Terminals: 4;
SCR25XV-240-2R0A006JV
KEMET Corporation
KEMET's SCR25XV-240-2R0A006JV is a 1000V rated, single-phase EMI mains filter with 24A current capacity. It offers high insulation resistance of 100 Mohm and operates b/w -40°C to 120°C. Ideal for through-hole mounting applications requiring effective EMI filtering in compact spaces.
SSHB21HS-12110
KEMET Corporation's SSHB21HS-12110 EMI Mains Filter has a rated voltage of 250V, rated current of 1.2A, and high pot of 500V. It operates b/w -25°C to 130°C and is UL approved for applications requiring single-phase EMI filtering in various electronic devices.
RTEN-5010D
TDK
The TDK RTEN-5010D is a 3-phase EMI filter with a rated voltage of 500V and current of 10A. It offers high insulation resistance of 100 Mohm, approvals from UL and EN, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective mains filtering at a frequency of 60Hz.
5500.2003
Schurter Ag
The Schurter Ag 5500.2003 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates at -25 to 85°C temperatures, and offers high pot of 2700V. Ideal for single-phase EMI filtering applications with a rated current of 4A and dimensions of L25.0xB25.0xH25.0 mm.
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
SU9VF-07015
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
SSRH24NH-50041
KEMET Corporation's SSRH24NH-50041 is a UL approved EMI mains filter with 250V rated voltage and 5A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 25.5mm x 18mm. Ideal for single-phase EMI filtering applications.
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
CMS1-5-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
SC-26-S010JH
KEMET Corporation's SC-26-S010JH is a 3-phase EMI mains filter with 500V UL approval. It offers a rated current of 26A, insulation resistance of 500 Mohm, and operates b/w -25°C to 120°C. Ideal for applications requiring high-pot testing up to 100V, it has a diameter of 50mm and height of 28mm for through-hole mounting in various electronic systems.
FN3288HVIT-100-35-C43-R60
Schaffner Holding Ag's FN3288HVIT-100-35-C43-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and -40 to 100°C operating temperature range. It has approvals from IEC and UL for applications requiring high insulation resistance, such as industrial machinery and power distribution systems.
SCR25XV-220-1R9A007JH
KEMET Corporation's SCR25XV-220-1R9A007JH is a 1000V rated SINGLE PHASE EMI filter with 22A current. Operating temperature ranges from -40°C to 120°C. It is used in EMI mains filtering applications due to its compact size and through-hole mounting design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84114-D-B60
TDK's B84114-D-B60 is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 6A current. With dimensions of L75.5xB50.8xH31.8 (mm), it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for single-phase EMI filtering in panel mount applications at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84113H0000G120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 133 mm; Approvals (V): UL; CUL; ENEC-10; Height: 53 mm; Mounting Type: PANEL MOUNT;
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84113H0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Operating Frequency (Hz): 50/60Hz; Dimensions: L133.0XB59.0XH53.0 (mm)/L5.236XB2.323XH2.087 (inch); Width (mm): 59.0; Mounting Type: PANEL MOUNT;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84112B0000L060
Epcos Ag
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Manufacturer Series: B84112B; Mounting Type: PANEL MOUNT; Height: 28.6 mm; Maximum Leakage Current: .5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved