Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B84113H0000G125 is a UL, CUL, and ENEC-10 approved 250V single-phase EMI mains filter with a rated current of 25A. It offers high pot protection up to 2700V and max leakage current of 3.5mA. Ideal for panel mount applications, its compact dimensions of L133.0xB59.0xH53.0 (mm) make it suitable for various electronic devices requiring effective EMI filtering at 50/60Hz frequencies.
Median Price
$64.832
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$76.340
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$78.730
$60.102
Chip1Stop
$67.500
Verical
$62.165
Arrow
$62.022
RS (Exports)
$61.582
Nova Conductors
$66.756
VNN
ComSIT Distribution GmbH
Vyrian
AZTECH Wire
$11.474
Ampacity Inc.
$52.340
Netroflash
$63.418
$62.083
Authorized Procurement Solutions
Perfect Parts
Having approvals from UL, CUL, and ENEC-10 ensures that this product meets high safety and quality standards.
Suitable for use with standard 250V electrical systems.
Provides effective filtering of electromagnetic interference in single-phase systems.
Compact size allows for easy installation in various applications.
Compatible with common electrical systems operating at 50 or 60Hz.
Optimal length for accommodating the necessary filter components.
High voltage tolerance ensures reliable performance under varying electrical conditions.
Low leakage current for enhanced safety and efficiency.
Panel mounting capability allows for secure and convenient installation.
Versatile dimensions make it suitable for a range of applications and installations.
Suitable for use with devices and equipment requiring up to 25A of current.
Compact height for easy integration into different setups.
EMI Mains Filters B84113H0000G125 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Itt Semiconductor
Rugao Dachang Electronic
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Weitronic Enterprise
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Continental Device India
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Micropac Industries
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
ESP-03-221
Cosel
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
03DBAW5
Delta Electronics
Delta Electronics' 03DBAW5 EMI Mains Filter offers UL, CSA, VDE approvals with insertion loss of 15 dB at 0.15-30 MHz range. Rated for 250V and 3A, it is a single-phase filter ideal for panel mounting applications requiring high pot of 2250V.
FN2070-3-06
Schaffner Holding Ag
FN2070-3-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 3.5A, and operates at temperatures ranging from -25°C to 100°C. This chassis mount filter is ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
PLA10AN4330R3R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
1600APS12L
TE Connectivity
TE Connectivity's 1600APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 1600A. With a max operating temperature of 50°C, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
2-1609037-9
TE Connectivity's 2-1609037-9 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. Ideal for EMI mains filtering applications, it operates b/w -10°C to 40°C at 50Hz frequency and mounts on panels.
SSRH7H-M07196
KEMET Corporation
KEMET Corporation's SSRH7H-M07196 is a UL approved EMI mains filter with 100 Mohm insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 120°C and has a rated current of 0.7A. It is designed for through-hole mounting applications, measuring 14.5mm in width, 18mm in length, and 12mm in height.
SSR21NV-M18164
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 27 mm; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
2-6609037-5
TE Connectivity's 2-6609037-5 EMI Mains Filter offers UL, CSA, VDE approvals. It provides 15 dB insertion loss at 0.01 MHz and 75 dB at 5 MHz. With a rated voltage of 120V, it is ideal for single-phase EMI filtering applications in panels with a max operating temperature of 40°C and high pot of 2250V.
SC-07-E030JH-P
KEMET Corporation's SC-07-E030JH-P is a UL approved EMI mains filter with 250V rated voltage and 7A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperatures. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
3-103-983
Schurter Ag
Schurter Ag's 3-103-983 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
FN402-1.6-02
Schaffner Holding Ag's FN402-1.6-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with 250V rated voltage. It features single-phase filter type, 5 terminals, and 1.9A rated current suitable for applications requiring effective electromagnetic interference suppression in a compact design.
60AYT6C
The TE Connectivity 60AYT6C is a UL, CSA, VDE approved EMI mains filter with insertion loss of 12 dB at min frequency and 45 dB at max frequency. It operates at 50/60Hz, rated for 250V and has a rated current of 60A. Ideal for three-phase EMI filtering in applications requiring high voltage protection up to 1450V.
B82793C0105N265
TDK
TDK's B82793C0105N265 is a SINGLE PHASE EMI FILTER with 42V rated voltage, -40 to 125 °C operating temp range, and 750V high pot. Ideal for EMI mains filtering applications, it has dimensions of L7.1xB6.0xH4.9 mm and operates at 50/60Hz frequency.
PLA10AN1030R7R2B
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
7448031501
Wuerth Elektronik & Kg
Wurth Elektronik 7448031501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 15A current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approved applications requiring EMI mains filtering at 50Hz frequency.
FN2020-16-06
Schaffner Holding Ag's FN2020-16-06 EMI Mains Filter is a single-phase filter with 250V rated voltage and 18.4A rated current. It has UL, CSA, and ENEC-14 approvals, operates at -25 to 100°C, and offers high pot protection up to 2000V. Ideal for chassis mounting applications requiring effective filtering in the frequency range of 50/60Hz.
SSB11H-R13090
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 343 Cel; Rated Voltage: 250 V;
SCR25B-105-1R3A035JH
KEMET Corporation's SCR25B-105-1R3A035JH is a UL approved EMI mains filter with 500V rated voltage and 10.5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter suitable for through-hole mounting applications.
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84114-D-B60
TDK's B84114-D-B60 is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 6A current. With dimensions of L75.5xB50.8xH31.8 (mm), it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for single-phase EMI filtering in panel mount applications at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84113H0000G120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 133 mm; Approvals (V): UL; CUL; ENEC-10; Height: 53 mm; Mounting Type: PANEL MOUNT;
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B060
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 28.6 mm; Rated Voltage: 250 V; Length: 63.5 mm; Mounting Type: PANEL MOUNT;
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84113H0000M125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; High Pot: 2500 V; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved