Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VNS1NV04PTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It has 8 terminals in a small outline package style, suitable for applications requiring a nominal voltage of 5V. With a turn-on time of 1us and output current flow direction as sink, it offers efficient performance in various electronic systems.
Median Price
$0.793
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.270
100+ parts
$0.737
1k+ parts
$0.651
10k+ parts
-
Element14
$1.556
$1.087
$0.707
$0.648
Farnell
$1.052
$0.684
$0.638
Arrow
$0.498
Verical
$0.501
Chip1Stop
$0.534
Nova Conductors
$0.695
Digiode
$1.226
Chip Stock
Vyrian
IBS Electronics
$0.673
Infinite Electronics LLP
Rutronik
$0.473
Anansix
Ampacity Inc.
$0.434
Argo Parts USA
$0.692
$0.671
Netroflash
Semicontronic
$0.950
$0.926
$0.922
Corphita
$1.161
Microchip USA
$4.193
Corohmni
$4.325
Advanced Electronics
$5.817
$5.293
$4.770
IDEA Electronic Components Group
$11.651
$10.486
Aztec Data Supply Inc.
$13.100
MKK Technologies
$21.909
DigiPath Technology Company
RC Electronics
Continental Prestige Electronics
$0.889
$0.574
Lixinc
Kepictronics
Perfect Parts
Eastek
$0.830
GreenTree Electronics
Assy Fe
Futuretech Components
A-Z Elektronik GmbH
Parana Technologies
$13.930
Durable and lightweight material, ensuring the product is long-lasting and easy to handle.
Provides ease of installation and allows for efficient use of PCB space.
Ensures the safety of the device and connected components by protecting against various electrical faults.
Compatible with common voltage standards, making it versatile and easy to integrate into existing systems.
Can withstand high temperatures during the soldering process, ensuring reliable assembly.
Capable of handling moderate to high current loads, suitable for driving various peripherals.
Fast response time ensures quick activation of connected peripherals, enhancing overall system performance.
Peripheral Drivers VNS1NV04PTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
VNS1NV04PTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev 21/Dec/2022
PCN Packaging - Mult Dev Label Chgs 29/Oct/2020 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Itt Semiconductor
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
ULN2004AIN
ULN2004AIN by Texas Instruments is a peripheral driver with 7 functions. It has a max supply voltage of 8V and can operate in temperatures ranging from -40°C to 105°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
VNQ7040AYTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
E-L293DD013TR
E-L293DD013TR by STMicroelectronics is a peripheral driver with 2 functions, operating at 4.5-36V. It offers thermal protection and source/sink current flow direction. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
TPS4H000BQPWPRQ1
TPS4H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal, and under voltage. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.
VN750B5-E
STMicroelectronics' VN750B5-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 2A. Ideal for applications requiring sink output current flow direction in compact spaces.
IRS21850SPBF
Infineon Technologies
IRS21850SPBF by Infineon is a CMOS peripheral driver with 8 terminals in a small outline package. It operates b/w -40 to 125 °C and has built-in transient and under voltage protections. Ideal for automotive applications, it features a max supply voltage of 20 V and turn-on/off time of 0.21 us.
NCV8403ASTT3G
NCV8403ASTT3G by Onsemi is a small outline peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has a nominal output peak current limit of 17A and operates at a nominal voltage of 10V. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics.
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
E-TDE1707BFP
E-TDE1707BFP by STMicroelectronics is a Peripheral Driver with 8 terminals, operating voltage range of 6-48V, and built-in protections against transient, over current, and thermal issues. It is a small outline package suitable for commercial extended temperature applications requiring buffer or inverter based peripheral drivers with source and sink output current flow direction.
VNS1NV04DP-E
VNS1NV04DP-E by STMicroelectronics is an 8-terminal peripheral driver with a small outline package and gull wing terminals. It operates as a sink type buffer or inverter, handling a max output current of 30s at 240°C peak reflow temperature. Ideal for applications requiring surface mountable drivers in plastic/epoxy packages.
NCV8403ASTT1G
NCV8403ASTT1G by Onsemi is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has 4 terminals in a small outline package style, suitable for applications requiring a nominal voltage of 10V and an output peak current limit of 17A. This interface IC type operates as a sink with a terminal pitch of 2.3mm, making it ideal for various electronic systems.
BTS555E3146HKSA1
BTS555E3146HKSA1 by Infineon is a 5-terminal peripheral driver with max supply voltage of 34V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a nominal output peak current limit of 520A and a turn-on time of 600µs.
E-L9823013TR
E-L9823013TR by STMicroelectronics is a peripheral driver with 24 terminals, 5V supply voltage, and 0.5A max output current. It features a small outline package style and gull wing terminal form. Ideal for applications requiring precise control of peripherals in electronic systems.
NCP45521IMNTWG-L
NCP45521IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
TPS27S100BPWPR
TPS27S100BPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It operates in automotive temperature grades from -40 to 125°C and has a nominal output peak current limit of 7A. Ideal for high side driver applications with sink output current flow direction.
SN6507DGQR
SN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates b/w -55 to 125°C, making it suitable for various industrial applications requiring buffer or inverter-based interface ICs in compact designs.
VNQ5160KTR-E
STMicroelectronics' VNQ5160KTR-E is a peripheral driver with 4 functions, operating at 8-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a compact design and fast turn-on/off times like automotive systems.
VNQ5050AKTR-E
STMicroelectronics' VNQ5050AKTR-E is a 24-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 4.5V to 36V and has a turn-on time of 20us. Ideal for applications requiring source output current flow direction in compact designs.
TPS22916CNYFPT
TPS22916CNYFPT by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protections and is ideal for industrial applications requiring buffer or inverter based peripheral drivers.
BTS716GBXUMA1
BTS716GBXUMA1 by Infineon is a MOS technology-based peripheral driver with 4 functions, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 5.5V to 40V and has a nominal output peak current limit of 5.3A. This small outline driver is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC1473LCGN#PBF
Analog Devices
VNS1NV04DPTR-E
STMicroelectronics VNS1NV04DPTR-E is an 8-terminal peripheral driver with GULL WING terminals. It features a peak reflow temperature of 260°C and sink output current flow direction. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC type in a SMALL OUTLINE package.
VNS1NV04D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
VNS1NV04D-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
VNS14NV04
VNS14NV04 by STMicroelectronics is a small outline peripheral driver with 8 terminals, built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 18A and turn-on time of 4.5us. Ideal for applications requiring sink output current flow direction in a compact package.
VNS14NV0413TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
VNS14NV04P-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
VNS14NV04PTR-E
VNS14NV04PTR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has 8 terminals in a small outline package style, with nominal voltage of 5V and output peak current limit of 18A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output flow direction.
VNS1NV04
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
VNS1NV0413TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VNS1NV04D13TR
VNS1NV04D13TR by STMicroelectronics is a Peripheral Driver with 2 functions, built-in protections for transient, over current, and over voltage. It has 8 terminals in a small outline package style. This driver is ideal for applications requiring a nominal output peak current limit of 1.7A and sink output current flow direction.
VNS1NV04P-E
VNS1NV04TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved