Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.
Median Price
$1.060
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Avnet
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Digiode
Semicontronic
$0.940
$0.916
$0.912
Ampacity Inc.
Modulus Dynamics
$3.141
$3.015
$2.890
Corohmni
$4.504
Advanced Electronics
$11.527
$10.950
Aztec Data Supply Inc.
$12.621
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Corphita
Authorized Procurement Solutions
PLASTIC/EPOXY. This material choice provides durability and protection for the peripheral driver, making it a reliable option.
YES. The ability to surface mount allows for easy installation and integration into various electronic systems.
43 V. With a high maximum supply voltage, this peripheral driver can handle a wide range of power requirements, making it versatile and suitable for different applications.
1. The single function design simplifies usage and ensures focused performance.
RECTANGULAR. The rectangular package shape allows for efficient space utilization and easy placement on a circuit board.
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE. The built-in protections ensure the safety and reliability of the peripheral driver, safeguarding it and connected devices from various potential risks.
4. The limited number of terminals simplifies connections and reduces wiring complexity.
SMALL OUTLINE. The small outline package style enables compact designs, making it ideal for applications with space constraints.
4.75 V. The low minimum supply voltage allows for compatibility with lower power systems and enhances energy efficiency.
85 °C. With a high maximum operating temperature, this peripheral driver can withstand demanding environmental conditions, expanding its usability in diverse applications.
30 °C. The capability to operate at low temperatures ensures reliable performance even in colder environments.
SINGLE. The single terminal position simplifies installation and ensures consistent connectivity.
2.5 mm. The low maximum seated height allows for more compact integration and reduces the overall size of the system.
6.22 mm. The narrow width facilitates space-saving designs, making it suitable for applications with limited board or enclosure space.
6.5 mm. The small length contributes to a compact overall size, enabling efficient usage of available space.
GULL WING. The gull wing terminal form ensures secure and reliable electrical connections, minimizing the risk of disconnection or damage.
5 V. The nominal supply voltage aligns with standard power requirements, making it compatible with a wide range of systems and devices.
200 us. The fast turn-on time ensures quick and responsive operation, enhancing the overall performance of the peripheral driver.
1.14 mm. The small terminal pitch allows for denser connections and increased board space efficiency.
1.8 A. With a high nominal output peak current limit, this peripheral driver can handle demanding loads and provide sufficient power to connected devices.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER. The buffer or inverter based interface IC type offers versatility and compatibility with different types of peripheral devices.
200 us. The fast turn-off time ensures efficient switching and minimizes power loss during transitions.
SINK. The sink output current flow direction allows the peripheral driver to control and handle devices that require current sinking, expanding its compatibility in various applications.
Peripheral Drivers ITS428L2XT attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Built-in Protections:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
ITS428L2XT Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Formosa Microsemi
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
BTS70021EPPXUMA1
BTS70021EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, offering built-in protections against over/under voltage and thermal issues. It operates at supply voltages ranging from 6V to 18V, making it suitable for automotive applications requiring a nominal output peak current limit of 2.1A. The compact rectangular package style with gull wing terminal form ensures efficient heat dissipation in space-constrained environments.
BSP75NHUMA1
BSP75NHUMA1 by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a 0.7A output peak current limit. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 20us.
VN750PT-E
STMicroelectronics' VN750PT-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN820PTTR-E
STMicroelectronics' VN820PTTR-E is a MOS technology-based peripheral driver with built-in protections. It operates at 5.5-36V, delivering up to 9A output current flow direction SOURCE. This small outline IC is ideal for applications requiring transient, overcurrent, overvoltage, thermal protection in compact designs.
VNS1NV04DP-E
VNS1NV04DP-E by STMicroelectronics is an 8-terminal peripheral driver with a small outline package and gull wing terminals. It operates as a sink type buffer or inverter, handling a max output current of 30s at 240°C peak reflow temperature. Ideal for applications requiring surface mountable drivers in plastic/epoxy packages.
MIC5801YWM-TR
Microchip Technology
MIC5801YWM-TR by Microchip Technology is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 5V. This small outline package (15.42mm x 7.52mm) features inverted output polarity, Gull Wing terminals, and sink current flow direction, making it ideal for various interface applications requiring buffer or inverter-based drivers.
MIC2981/82YWM
MIC2981/82YWM by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V. It features built-in transient protections and operates in industrial temperature grades. This small outline package driver has a turn-on time of 2us and turn-off time of 10us, making it ideal for various applications requiring source current flow direction.
UDN2987LWTR
Allegro MicroSystems
Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.
AUIPS6041GTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VNH5180ATR-E
VNH5180ATR-E by STMicroelectronics is a HALF BRIDGE BASED PERIPHERAL DRIVER with Matte Tin finish. It has a max reflow temp of 260°C and MSL level of 3. Ideal for applications requiring SINK output current flow direction in SMALL OUTLINE package.
UDN2981A-T
Allegro MicroSystems' UDN2981A-T is an 8-bit peripheral driver with a max output current of 0.35A and nominal voltage of 35V. It features built-in transient protection, operates b/w -20°C to 85°C, and has a turn-on time of 2µs. Ideal for applications requiring source output current flow direction in various electronic systems.
IRS2106STRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VNQ7050AJTR
VNQ7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
IRS21856SPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2;
MIC5842YN
MIC5842YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.
VND7020AJTR-E
VND7020AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. This rectangular package is ideal for applications requiring sink output current flow direction in a compact form factor.
L9958SB
L9958SB by STMicroelectronics is a FB-based peripheral driver with PWM, offering source and sink output current flow direction. With 16 terminals in a small outline package, it features matte tin terminal finish and gull wing form. Ideal for applications requiring precise motor control in automotive systems.
TPIC6273DWRG4
Texas Instruments
TPIC6273DWRG4 by Texas Instruments is a latch-based peripheral driver with 8 channels, 2A output peak current limit, and inverted output polarity. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in transient protections. Ideal for applications requiring open-drain outputs such as automotive electronics.
LMD18200T/NOPB
HB BASED PERIPHERAL DRIVER WITH PWM; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: TO-220; Package Shape: RECTANGULAR;
BSP762T
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ITS4140NHUMA1
ITS4140NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, operating voltage range of 4.9V to 60V, and built-in protections against transient, over current, and over voltage. It has a small outline package style suitable for commercial extended temperature grade applications requiring sink output current flow direction.
ITS4141NHUMA1
ITS4141NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, MOS technology, and built-in protections. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
ITS4141NXT
ITS4141NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. This MOS technology-based device has a turn-on time of 100 us and output current flow direction is sink.
ITS4200SMEPHUMA1
ITS4200SMEPHUMA1 by Infineon is a peripheral driver with 4 terminals, operating voltage range of 11-45V, and built-in protections for transient, over/under voltage & current. It has a small outline package suitable for automotive applications, featuring Schmitt trigger input characteristics and sink output current flow direction.
ITS4880RCUMA1
ITS4880RCUMA1 by Infineon Technologies is a peripheral driver with 8 functions, built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 11-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers in commercial extended temperature environments.
ITS428L2ATMA1
ITS428L2ATMA1 by Infineon: Peripheral driver with 43V max supply, 1.8A peak current limit, and 200us turn-on/off time. Ideal for commercial applications requiring sink output flow direction in a compact small outline package.
ITS41K0SMENHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
ITS4200SMEOHUMA1
ITS4200SSJDXUMA1
ITS4200SSJDXUMA1 by Infineon is a peripheral driver with 8 terminals, operating voltage range of 6-52V, and built-in protections for various faults. It is designed for automotive applications, featuring a small outline package style and sink output current flow direction. With a turn-on time of 180us and turn-off time of 200us, it provides efficient buffering or inverting functions in automotive systems.
ITS4140NXT
ITS4140NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.9-60V. This small outline package IC is ideal for applications requiring sink output current flow direction and a nominal peak current limit of 0.2A.
ITS4200SMENHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
ITS42008SBDAUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;
ITS42K5DLDFXUMA1
ITS42K5DLDFXUMA1 by Infineon: Peripheral driver with 10 terminals, 42V max supply voltage, and built-in protections. Ideal for automotive applications due to -40 to 125 °C operating temp range. Features 0.4A output peak current limit and 0.5mm terminal pitch for efficient performance.
ITS4060SSJNXUMA1
ITS4060SSJNXUMA1 by Infineon is a Peripheral Driver with 8 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its CMOS technology and source output current flow direction.
ITS4880R
ITS4880R by Infineon Technologies is a peripheral driver with 8 functions. It has a max supply voltage of 45V and operates in temperatures ranging from -30°C to 85°C. This IC type is commonly used as a buffer or inverter based peripheral driver.
ITS4300SSJDXUMA1
Infineon Technologies' ITS4300SSJDXUMA1 is a peripheral driver with a max supply voltage of 34V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline package (4mm x 5mm) is suitable for applications requiring buffer or inverter based interface ICs.
ITS4100SSJNXUMA1
ITS428L2
ITS428L2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.75V to 43V. This small outline IC is ideal for buffer or inverter-based applications requiring a peak output current limit of 1.8A.
ITS4140N
ITS4140N by Infineon Technologies is a peripheral driver with a max supply voltage of 60V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline MOS technology device is commonly used as a buffer or inverter based peripheral driver for various applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved