Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics L9822N is a 20-terminal peripheral driver with max supply voltage of 5.5V and output current of 1A. Ideal for BCD technology applications, it offers built-in transient and overcurrent protections in a small outline package style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Bristol Electronics
Microfarads
LWI Electronics Inc
IDEA Electronic Components Group
$3.419
$3.077
Microchip USA
$5.322
MKK Technologies
$6.429
DigiPath Technology Company
AZTECH Wire
$20.730
Ampacity Inc.
$39.500
A-Z Elektronik GmbH
Alle Elektronik GmbH
Vigor
Corphita
Kepictronics
Parana Technologies
$4.088
Durable and lightweight material that provides protection for the internal components of the driver.
Easily mountable on printed circuit boards, saving space and making installation convenient.
Can handle high supply voltage levels for versatile application scenarios.
Enhanced safety features to protect the driver and connected peripherals from damage due to transient events and over current situations.
Operates efficiently at a standard power supply voltage for compatibility with various systems.
Sufficient terminals for connecting multiple peripherals or devices, allowing for complex setups.
Compact design for space-saving integration in equipment or systems.
Capable of delivering a decent output current for driving peripherals with varying power requirements.
Utilizes BCD technology for efficient and reliable operation in peripheral driver applications.
Stable nominal supply voltage for consistent performance and compatibility with standard systems.
Peripheral Drivers L9822N attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
L9822N Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Changzhou Starsea Electronics
1554216004
Molex
WIRE AND CABLE;
Temic Semiconductors
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
ISO1H812GAUMA1
Infineon Technologies
Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.
IRS2304SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: RECTANGULAR;
MIC2981/82YN
Microchip Technology
MIC2981/82YN by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V and built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a turn-on time of 2µs. Ideal for applications requiring source current flow direction, such as buffer or inverter-based interface ICs.
BTS711L1
BTS711L1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.
FPF2110
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
A2982SLWTR
Allegro MicroSystems
Allegro MicroSystems' A2982SLWTR is a small outline peripheral driver with 8 functions and built-in transient protection. It operates b/w -20 to 85°C, with a supply voltage range of 5-50V. Ideal for applications requiring a max output current of 0.35A, such as buffer or inverter-based interface ICs.
BTS70102EPAXUMA1
BTS70102EPAXUMA1 by Infineon is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110 us. Ideal for automotive applications due to AEC-Q100 screening level.
BTT61002ERAXUMA1
BTT61002ERAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline heat sink package is suitable for applications requiring buffer or inverter based interface ICs.
TPS22916CLYFPT
Texas Instruments
TPS22916CLYFPT by Texas Instruments is a 4-terminal peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protection and is ideal for industrial applications requiring buffer or inverter-based interface ICs.
ULN2003AS16-13
Diodes Incorporated
ULN2003AS16-13 by Diodes Inc. is a peripheral driver with 1 function and 16 terminals. It has a max supply voltage of 13V and can operate at temperatures ranging from -40 to 105°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
FDC6330L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
ADUM3223BRZ-RL7
Analog Devices
ADUM3223BRZ-RL7 by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3V to 5.5V, and built-in thermal and under voltage protections. It is used in automotive applications due to its small outline package style and gull wing terminal form for reliable performance in harsh environments.
TBD62083AFWG(Z,EHZ)
Toshiba
Toshiba TBD62083AFWG(Z,EHZ) is a Peripheral Driver with 8 functions, 18 terminals, and built-in transient protection. It operates b/w -40 to 85 °C with a supply voltage range of 2.5V to 25V. Ideal for industrial applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
MAX4820EUP+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
BTS452TXT
BTS452TXT by Infineon is a MOS technology peripheral driver with 4 terminals and built-in protections. It operates at supply voltages ranging from 6V to 52V, offering a nominal output peak current limit of 2.2A. This small outline package is ideal for applications requiring sink output current flow direction and fast turn-on/off times.
TPS4H000BQPWPRQ1
TPS4H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal, and under voltage. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.
TPS27S100BRRKT
TPS27S100BRRKT by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C with a supply voltage range of 4-40V. Ideal for automotive applications due to its robust design and fast turn-on/off times of 80/50µs.
FAN7390AMX1
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
ITS42008SBDAUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L9823013TR
STMicroelectronics
L9823013TR by STMicroelectronics is a peripheral driver with 24 terminals and built-in protections. It operates at supply voltages b/w 4.5V to 5.5V, providing a max output current of 0.5A. This rectangular-shaped driver is ideal for applications requiring sink output current flow direction and a turn-on/off time of 20us.
L9822EPD013TR
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR;
L9822EPD
L9822EPD by STMicroelectronics is a SIPO-based peripheral driver with 8 bits. It operates at supply voltages b/w 4.75V to 5.25V and can handle a max output current of 1A, making it suitable for automotive applications. With built-in protections against transient and overcurrent, this driver has a small outline package style with gull wing terminals for easy mounting on PCBs.
L9825
L9825 by STMicroelectronics is a peripheral driver with 8 functions, 2.05A max output current, and built-in protections for transient, overcurrent, and thermal issues. It operates at supply voltages b/w 4.5V to 5.5V and is ideal for applications requiring buffer or inverter-based peripheral drivers in small outline packages with gull wing terminals.
L9826TR
SIPO BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
L9826
SIPO BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
L9823
L9823 by STMicroelectronics is a peripheral driver with 8-bit driver configuration and built-in protections for transient, over current, thermal, and under voltage. It operates at supply voltages b/w 4.5V to 5.5V, providing a max output current of 0.5A in sink direction. This rectangular-shaped driver is ideal for applications requiring precise control of low-power devices.
L9825TR
L9825TR by STMicroelectronics is a peripheral driver with 8 functions, 2.05A max output current, and built-in protections. It operates at 4.5-5.5V for various applications requiring source/sink current flow control in compact designs with small outline package style.
L9822E
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR;
L9820
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
L9820D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
L9820D013TR
L9821
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR;
L9822
Peripheral Drivers; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR; Power Supplies (V): 5;
L9822ED
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP20,.4;
L9822N013TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L9824
LATCH BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
L9824D
LATCH BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 25 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved