Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FPF2109 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.4 A. Ideal for industrial applications requiring a compact form factor and source flow direction.
Median Price
$1.115
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.300
100+ parts
$0.756
1k+ parts
$0.681
10k+ parts
-
Element14
$1.565
Adafruit Industries
$2.799
$2.659
Rochester
$0.742
$0.616
$0.549
DigiKey
$0.930
Verical
$0.770
$0.687
Digiode
$0.577
Nova Conductors
$0.904
Chip Stock
Vyrian
Flip Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Prism Electronics
Corel Iberica Componentes, S.L.
EMSNET
Euro-Tech
Bristol Electronics
Semicontronic
$0.520
$0.507
$0.504
Ampacity Inc.
Corphita
$0.546
Corohmni
$0.607
Continental Prestige Electronics
$0.886
Argo Parts USA
Bastille Electronics
$0.859
$0.816
$0.805
Aztec Data Supply Inc.
$2.118
Advanced Electronics
Metaverse IC Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
Authorized Procurement Solutions
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Problanco Electronics
Microchip USA
Alle Elektronik GmbH
Assy Fe
Supply Digital
UHIMA Technologies
Durable and lightweight material, ensuring long-lasting performance and easy handling.
Compatible with a wide range of power supplies, making it versatile for various applications.
Provides safety features to protect the peripheral driver and connected devices from potential damage.
Capable of delivering sufficient current for driving peripherals, ensuring reliable performance.
Maintains the peak current limit within safe operational levels, preventing overheating or overloading.
Peripheral Drivers FPF2109 attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FPF2109 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
DS18B20Z+
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BTS3408GXUMA1
Infineon Technologies
BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.
BTS452RATMA1
BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.
TPS22965NDSGR
TPS22965NDSGR by Texas Instruments is a peripheral driver with max supply voltage of 5.7V, min supply voltage of 2.5V, and operating temp range from -40 to 105°C. It is used as an interface IC type buffer or inverter based peripheral driver for industrial applications.
ITS4300SSJDXUMA1
Infineon Technologies' ITS4300SSJDXUMA1 is a peripheral driver with a max supply voltage of 34V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline package (4mm x 5mm) is suitable for applications requiring buffer or inverter based interface ICs.
BTS52004EKAXUMA1
BTS52004EKAXUMA1 by Infineon is a 14-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 230us. Ideal for applications requiring a nominal output peak current limit of 1A in automotive electronics.
BTS4880R
BTS4880R by Infineon is a peripheral driver with 8 functions, AEC-Q100 screening level, and built-in protections. It operates at supply voltages of 11-45V, with output peak current limit of 1.4A. Ideal for automotive applications requiring high reliability and protection against transient, over/under voltage, thermal issues.
BTS443PXT
BTS443PXT by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output peak current limit, and built-in protections. It is used for buffer or inverter-based interface ICs in applications requiring sink output current flow direction and fast turn-on/off times.
SI9986DY-T1-E3
Vishay Siliconix
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP45520IMNTWG-H
NCP45520IMNTWG-H by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
FDC6324L
FDC6324L by Onsemi is a small outline peripheral driver with 6 terminals. It features built-in transient protection, NMOS technology, and a peak output current limit of 1A. Ideal for applications requiring source flow direction such as buffer or inverter based interface ICs.
EL7156CSZ-T7
Renesas Electronics
EL7156CSZ-T7 by Renesas Electronics is a full bridge peripheral driver with 3.5A output current limit, suitable for industrial applications. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-16.5V. This small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.
BSP762T
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;
ITS4141NHUMA1
ITS4141NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, MOS technology, and built-in protections. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
BTS133TCBUMA1
BTS133TCBUMA1 by Infineon is a MOS peripheral driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with Gull Wing terminal form. With a nominal output peak current limit of 7A, it is commonly used in applications requiring sink output current flow direction.
LM3526M-H/NOPB
National Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRS21531DSPBF
IRS21531DSPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and has built-in under voltage protection. With a supply voltage range of 10.1V to 15.4V, it is ideal for automotive applications requiring source and sink output current flow direction.
BSP742R
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
L293D
L293D by STMicroelectronics is a peripheral driver with 2 functions, operating at a max supply voltage of 36V. It features built-in transient and thermal protections, suitable for applications requiring true output polarity and standard input characteristics. With a nominal output peak current limit of 1.2A, this half bridge-based peripheral driver is ideal for various electronic projects.
VNQ7050AJTR-E
STMicroelectronics VNQ7050AJTR-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring sink output current flow direction in compact spaces.
ULN2003LVPWR
ULN2003LVPWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40 to 85°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FPF2123
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
FPF2123 by Onsemi is a peripheral driver with 5.5V max supply voltage, 0.8A output peak current limit, and built-in protections. It is used in industrial applications requiring a compact form factor and operates b/w -40 to 85°C.
FPF2700MX
FPF2700MX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections for overcurrent, thermal, and undervoltage. This small outline package IC has 8 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for applications requiring buffer or inverter-based peripheral drivers with a peak output current limit of 0.4A.
FPF2125
FPF2125 by Onsemi is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
FPF2104
FPF2107
FPF2124
FPF2124 by Onsemi is a MOS technology-based peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
FPF2101
FPF2100
FPF2102
FPF2106
FPF2103
FPF2105
FPF2701MPX
FPF2701MPX by Onsemi is a peripheral driver with a max supply voltage of 36V and built-in protections for over current, thermal, and under voltage. It has 8 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.4A.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
FPF2700MPX
FPF2700MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections against overcurrent, thermal issues, and undervoltage. This industrial-grade device has a compact square package style with 8 terminals and operates in temperatures ranging from -40°C to 85°C. It serves as an interface IC type for buffer or inverter-based applications requiring a max output peak current limit of 0.4A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved