Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER;
Median Price
$0.386
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.480
100+ parts
$0.399
1k+ parts
$0.361
10k+ parts
$0.325
Mouser Electronics
$0.358
$0.314
Newark
$0.539
$0.457
$0.419
-
Arrow
$0.157
Verical
Chip1Stop
$0.242
Farnell
$0.292
$0.270
Element14
$0.512
$0.452
Vyrian
Digiode
$0.656
Anansix
Chip Stock
Corphita
$0.621
Continental Prestige Electronics
$1.080
Native Components
$8.610
Northwest PG Solutions
$9.471
$8.524
Glotronic Ltd.
Eastek
$0.340
GreenTree Electronics
RF Transformers BALFHB-WL-02D3 attributes and parameters. Explore more RF Transformers devices from STMicroelectronics
Transformer Type:
BALFHB-WL-02D3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Vishay Telefunken
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
ADT1-1WT-1
Mini-circuits
The Mini-circuits ADT1-1WT-1 RF Transformer has a power rating of 0.25W, insertion loss of 1dB, and max DC unbalance current of 30mA. It is designed for signal applications with a min cutoff frequency of 1GHz and operates in temperatures ranging from -20°C to 85°C. Ideal for surface mount installations, it comes in tape & reel packaging and measures L7.87xB5.59xH2.84mm.
1812WBT-3LC
Coilcraft
1812WBT-3LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 1.25 uH Inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 4 GHz, max cutoff frequency of 200 MHz, and surface mounting feature.
Z9314-ALB
Coilcraft's Z9314-ALB RF Transformer offers 1.1 dB insertion loss, 4.5 uH primary inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 0.35 GHz up to a max of 1700 MHz, this surface mount transformer is designed for high-frequency RF circuits.
C2268FNL
Pulse Electronics
C2268FNL by Pulse Electronics is a surface mount RF transformer with inductance of 7.5uH, dimensions L12.65xB8.89xH5.08 mm, and operating temperature range of 0-70°C. It is ideal for applications requiring a 1:1 turns ratio in compact designs for RF signal transmission and reception.
BALFLB-WL-07D3
STMicroelectronics
BALFLB-WL-07D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of 2.15 dB and operates b/w -40 °C to 105 °C. It features a min cutoff frequency of 470 GHz and max cutoff at 510 MHz, ideal for high-frequency applications. Compact dimensions (2.15mm x 1.88mm x 0.68mm) make it suitable for space-constrained designs.
WBC16-1TLC
WBC16-1TLC by Coilcraft is a RF transformer with 0.25W power rating, 300V isolation voltage, and 0.8dB insertion loss. Ideal for isolation applications, it operates b/w -40 to 85°C temperatures and has a min cutoff frequency of 0.6GHz.
BAL-WILC10-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Cutoff Frequency: 2400 GHz; Packing Method: TR, 7 INCH; Insertion Loss: .8 dB;
BALF-112X-01D3
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
WBC1-1TLC
Coilcraft's WBC1-1TLC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.58dB insertion loss. Ideal for isolation applications with inductance of 9.5uH and dimensions of L4.45xB4.19xH3.05mm for surface mounting method.
HFB050100
Pulse Specialty Components
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: HFB050100; Packing Method: BULK; Height: 22.86 mm; Minimum Operating Temperature: 0 Cel;
MABACT0059
TE Connectivity
TE Connectivity's MABACT0059 RF Transformer offers 8.4 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of 3.81mm x 3.81mm x 2.72mm and operating temperatures ranging from -40°C to 85°C.
WBC16-1TLB
The Coilcraft WBC16-1TLB is a RF transformer with 0.25W power rating, 5uH inductance, and 0.8dB insertion loss. Ideal for isolation applications with 300V isolation voltage, it operates b/w -40 to 85°C and has dimensions of L4.45xB4.19xH3.05mm for surface mounting method.
P3181
Etal Group Ab
P3181 RF Transformer by Etal Group Ab features inductance of 10800 uH, dimensions L13.0XB9.0XH7.0 (mm), and a turns ratio of 1.1:1. It is ideal for applications requiring surface mounting, with approvals including IEC60950 and UL standards, suitable for use in various electronic devices.
TTWB2040
Coilcraft's TTWB2040 RF Transformer offers low 0.4 dB insertion loss, 25 uH primary inductance, and 1:4 turns ratio. Ideal for surface mount applications in RF circuits with a frequency range from 0.15 GHz to 400 MHz.
BAL-CW1250D3
BAL-CW1250D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 0.97 dB. It operates b/w 2400 MHz and 2500 MHz, making it ideal for high-frequency applications. With a compact size of 1.25mm x 1.04mm, it suits space-constrained designs.
ETC1-1-13TR
M/a-com Technology Solutions
ETC1-1-13TR by M/a-com Technology Solutions is a RF Transformer with 0.25W power rating, 3.5dB insertion loss, and 30mA max DC unbalance current. It is used for matching applications in RF circuits, with dimensions of L3.81xB2.79xH2.79mm and operating temperatures ranging from -55 to 85°C.
BALF-NRG-02J5
PCT-77
Stancor Products
Stancor Products' PCT-77 RF Transformer has a max operating temp of 105°C, cutoff freq range from 0.0003 GHz to 0.1 MHz, and 1:1 turns ratio. Ideal for through-hole mounting in RF applications due to its compact size (11.81mm x 7.874mm x 10.414mm).
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width: 2.79 mm; Maximum Cutoff Frequency: 3000 MHz; Height: 2.72 mm;
Inrcore
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; Height: 22.86 mm; Insertion Loss: -2 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-SPI2-01D3
STMicroelectronics' BALF-SPI2-01D3 RF Transformer has 2.1 dB insertion loss, operates b/w -40 to 105°C, with a cutoff frequency range of 860-930 MHz. Ideal for surface mount applications in RF circuits for various wireless communication devices.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
BALF-SPI-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.45 mm; Length: 2 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: 779 GHz;
BALF-SPI2-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 105 Cel; Packing Method: TR; JESD-609 Code: e1;
BALF-SPI-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 1.45 mm; Insertion Loss: -3.2 dB;
BALF-NRF01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1 mm; Minimum Cutoff Frequency: 2400 GHz; Length: 1.5 mm; Height: .63 mm;
BALF-NRF01J5
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Length: 1.375 mm; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFHB-WL-04D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .68 mm; Additional Features: HEIGHT DIM INCLUDE TERMINAL ALSO; Insertion Loss: 1.5 dB; Packing Method: TR;
BALF-NRF01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .48 mm; Maximum Cutoff Frequency: 2540 MHz; Maximum Operating Temperature: 105 Cel; Insertion Loss: 2.7 dB;
BALFHB-WL-03D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Length: 2.15 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 928 MHz;
BALFHB-WL-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.4 dB; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 928 MHz; Length: 2.15 mm;
BALF-CC26-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel; Length: 1.485 mm; Maximum Operating Temperature: 105 Cel;
BALFHB-WL-06D3
STMicroelectronics' BALFHB-WL-06D3 RF Transformer features 0.85 dB insertion loss, 862 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a temperature range of -40 to 105 °C.
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 2.15 mm; Maximum Cutoff Frequency: 510 MHz; Minimum Operating Temperature: -40 Cel; Insertion Loss: 2.15 dB;
BALFHB-WL-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Minimum Cutoff Frequency: 862 GHz; Minimum Operating Temperature: -40 Cel; Width: 1.88 mm;
BALFLB-WL-08D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Insertion Loss: 2.2 dB; Maximum Cutoff Frequency: 510 MHz; Minimum Cutoff Frequency: 470 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved