Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BALF-NRF01J5 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.4 dB, operates b/w -40 °C to 85 °C, and covers frequencies from 2400 MHz to 2540 MHz. Its surface mount design ensures easy integration into devices.
Median Price
$0.034
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.032
1k+ parts
$0.031
10k+ parts
$0.030
Verical
-
Chip1Stop
$0.061
$0.058
$0.056
Vyrian
Digiode
$0.062
Flip Electronics
Anansix
Corphita
IDEA Electronic Components Group
$3.913
$3.521
MKK Technologies
$7.358
DigiPath Technology Company
Parana Technologies
$4.678
Northwest PG Solutions
Native Components
A low insertion loss of 2.4 dB ensures efficient signal transmission, making this RF transformer an excellent choice for minimizing signal degradation in communication systems.
The TR packing method enhances the product's shelf life and reliability, ensuring that it remains in optimal condition until ready for use.
With a maximum operating temperature of 85 °C, this RF transformer is suitable for a variety of environments, ensuring reliable operation even under demanding conditions.
The high minimum cutoff frequency of 2400 GHz makes this transformer ideal for high-frequency applications, expanding its usability in advanced communication technologies.
Capable of operating at temperatures as low as -40 °C, this RF transformer is well-suited for use in extreme environments, ensuring versatile application possibilities.
At just 0.21 mm in height, this compact design allows for easy integration into space-constrained applications without compromising performance.
The 0.845 mm width makes this transformer suitable for surface mount technology, promoting easier assembly and cost-effective manufacturing.
With a maximum cutoff frequency of 2540 MHz, this transformer can handle a wide range of frequencies, enhancing its versatility in RF applications.
Being an RF transformer, this component is specifically optimized for radio frequency applications, providing excellent performance for communication systems.
The surface mount feature simplifies installation and helps in reducing the overall size of the circuit, making it ideal for modern electronic designs.
At a length of 1.375 mm, this component is perfectly sized for compact layouts in RF circuits, ensuring a space-efficient solution without sacrificing functionality.
RF Transformers BALF-NRF01J5 attributes and parameters. Explore more RF Transformers devices from STMicroelectronics
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Transformer Type:
Width:
BALF-NRF01J5 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - EOL ADG-23-13935 17/Feb/2023
PCN Packaging - Label 17/Jan/2019
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
ADT1-1WT+
Mini-circuits
Mini-circuits' ADT1-1WT+ RF Transformer has 3 dB insertion loss, 0.5 W power rating, and 800 MHz max cutoff frequency. Ideal for matching applications, it operates b/w -20 to 85 °C with a turns ratio of 1:1 in a compact L7.87XB5.59XH2.84 mm surface mount design.
LDB212G4020C-001
Murata Manufacturing
Murata Manufacturing's LDB212G4020C-001 RF Transformer has impedance of 50Ω primary and 100Ω secondary, with insertion loss of 1.05 dB. It is a surface mount transformer for signal applications, operating b/w -40°C to 85°C, with cutoff frequency ranging from 2.3 GHz to 2.5 GHz.
PA0907NL
Pulse Electronics
PA0907NL by Pulse Electronics is a RF Transformer with inductance of 660uH, operating temperature range from -40 to 125 °C. It has dimensions of L29.46xB25.4xH10.2 mm and cutoff frequency ranging from 0.2 GHz to 0.7 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high performance capabilities.
TP-220
Synergy Microwave
TP-220 by Synergy Microwave is an RF transformer with a 3 dB insertion loss. It has a min cutoff frequency of 0.08 GHz and a max cutoff frequency of 340 MHz. This through-hole mounted transformer is commonly used in RF applications for impedance matching and signal isolation.
ETC1-1T-5TR
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
TTWB2040LB
Coilcraft
Coilcraft's TTWB2040LB RF Transformer offers 400V isolation voltage, 0.4dB insertion loss, and 25uH primary inductance. Ideal for POWER applications with a frequency range from 150KHz to 400MHz. Dimensions of 6.35mm x 6.1mm x 4.7mm make it suitable for surface mount installations.
BAL-WILC10-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Cutoff Frequency: 2400 GHz; Packing Method: TR, 7 INCH; Insertion Loss: .8 dB;
ADT2-1T+
The Mini-circuits ADT2-1T+ is a RF transformer with a power rating of 0.25W and insertion loss of 3dB. It is used for matching applications, with a min cutoff frequency of 400KHz and max operating temperature of 85°C.
WB1010-1-SMLD
Coilcraft's WB1010-1-SMLD RF Transformer offers 95uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.04GHz to 175MHz. Ideal for surface mount applications in RF circuits requiring precise impedance matching and signal isolation.
TC2-1TX+
The Mini-circuits TC2-1TX+ RF Transformer has a power rating of 0.25W and insertion loss of 1dB. With dimensions of L3.81xB3.81xH4.06 (mm), it is ideal for matching applications in the RF frequency range from 3000 KHz to 300 MHz, with a max operating temperature of 85°C.
CX2041NL
CX2041NL by Pulse Electronics is a RF Transformer with 0.25W power rating, 0.6dB insertion loss, and 450MHz max cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has a turns ratio of 1:1CT.
ETC4-1-2TR
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC4-1-2; Minimum Cutoff Frequency: 2 GHz; Width: 2.79 mm; Additional Features: IMPEDANCE RATIO IS 1:4;
TT1-6-KK81+
The Mini-circuits TT1-6-KK81+ RF Transformer has a power rating of 0.25W and insertion loss of 3dB. With dimensions L7.62xB6.86xH5.84 (mm), it is ideal for matching applications in the frequency range from 4KHz to 300MHz, with a max operating temperature of 85°C.
ETC1-1T-2TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-2; Height: 3.8 mm; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 85 Cel;
BALFHB-WL-01D3
BALFHB-WL-01D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of 1.45 dB and operates b/w -40 °C to 105 °C. It features a compact size of 2.15mm x 1.88mm x 0.68mm, ideal for high-frequency applications starting at 862 GHz. This component enhances signal integrity in wireless communication systems.
MABAES0061
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.7 mm; Dimensions: L3.81XB2.79XH3.8 (mm); Maximum Operating Temperature: 85 Cel; Length: 3.81 mm;
ADT4-1T
Mini-circuits' ADT4-1T RF Transformer has 1W power rating, 3dB insertion loss, and 30mA max DC unbalance current. Ideal for matching applications with a frequency range from 9GHz to 625MHz. Compact size of L7.87xB5.59xH2.84 (mm) makes it suitable for surface mount installations in various RF systems.
HFB050100
Pulser
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Minimum Operating Temperature: 0 Cel; Insertion Loss: -2 dB; Maximum Cutoff Frequency: 1200 MHz; Width: 28.956 mm;
ATB2012-50011-T000
TDK
ATB2012-50011-T000 by TDK is an RF Transformer with 2.5 dB Insertion Loss, 40 GHz Min Cutoff Frequency, and -40 to 85 °C Operating Temperature range. Ideal for applications requiring high-frequency signal transformation in compact electronic devices due to its small dimensions and surface mounting feature.
SWB3010-SMLD
Coilcraft's SWB3010-SMLD RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits requiring precise signal transformation with a min cutoff frequency of 0.005GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BALF-112X-01D3
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-SPI2-01D3
STMicroelectronics' BALF-SPI2-01D3 RF Transformer has 2.1 dB insertion loss, operates b/w -40 to 105°C, with a cutoff frequency range of 860-930 MHz. Ideal for surface mount applications in RF circuits for various wireless communication devices.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
BALF-SPI-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.45 mm; Length: 2 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: 779 GHz;
BALF-SPI2-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 105 Cel; Packing Method: TR; JESD-609 Code: e1;
BALF-SPI-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 1.45 mm; Insertion Loss: -3.2 dB;
BALF-NRF01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1 mm; Minimum Cutoff Frequency: 2400 GHz; Length: 1.5 mm; Height: .63 mm;
BALFHB-WL-04D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .68 mm; Additional Features: HEIGHT DIM INCLUDE TERMINAL ALSO; Insertion Loss: 1.5 dB; Packing Method: TR;
BALF-NRG-02J5
RF TRANSFORMER;
BALF-NRF01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .48 mm; Maximum Cutoff Frequency: 2540 MHz; Maximum Operating Temperature: 105 Cel; Insertion Loss: 2.7 dB;
BALFHB-WL-03D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Length: 2.15 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 928 MHz;
BALFHB-WL-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.4 dB; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 928 MHz; Length: 2.15 mm;
BALF-CC26-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel; Length: 1.485 mm; Maximum Operating Temperature: 105 Cel;
BALFHB-WL-06D3
STMicroelectronics' BALFHB-WL-06D3 RF Transformer features 0.85 dB insertion loss, 862 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a temperature range of -40 to 105 °C.
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFLB-WL-07D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 2.15 mm; Maximum Cutoff Frequency: 510 MHz; Minimum Operating Temperature: -40 Cel; Insertion Loss: 2.15 dB;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Minimum Cutoff Frequency: 862 GHz; Minimum Operating Temperature: -40 Cel; Width: 1.88 mm;
BALFLB-WL-08D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Insertion Loss: 2.2 dB; Maximum Cutoff Frequency: 510 MHz; Minimum Cutoff Frequency: 470 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved