Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
Median Price
$0.663
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.386
100+ parts
-
1k+ parts
10k+ parts
Digiode
$0.940
Vyrian
VNN
Anansix
Argo Parts USA
$0.375
$0.364
Netroflash
$0.367
$0.359
Modulus Dynamics
$0.416
$0.412
$0.400
Continental Prestige Electronics
$0.507
$0.224
Semicontronic
$0.840
$0.819
$0.815
Ampacity Inc.
Corphita
$0.891
Aztec Data Supply Inc.
$1.420
IDEA Electronic Components Group
$2.343
$2.109
Corohmni
$3.524
MKK Technologies
$4.406
DigiPath Technology Company
Advanced Electronics
$6.984
$6.635
Lixinc
Futuretech Components
Authorized Procurement Solutions
Parana Technologies
$2.802
Robosynatics
Lucentia Tech
$0.021
Low insertion loss ensures minimal signal attenuation, making this RF transformer ideal for high-performance applications.
TR packaging method provides convenient handling and storage, allowing for easy integration into circuits.
With a high maximum operating temperature, this transformer can withstand challenging environmental conditions.
The low minimum cutoff frequency ensures efficient signal processing in high-frequency applications.
The wide operating temperature range makes this transformer suitable for use in extreme environments.
Compact design with a low height profile allows for space-saving installation in tight layouts.
Narrow width makes this transformer suitable for applications with limited board space.
High maximum cutoff frequency enables this transformer to handle a wide range of signal frequencies effectively.
Specifically designed as an RF transformer, ensuring optimal performance in RF signal applications.
Surface mounting feature facilitates easy and secure installation on circuit boards.
The moderate length of this transformer allows for flexibility in placement within electronic devices.
RF Transformers BALF-112X-01D3 attributes and parameters. Explore more RF Transformers devices from STMicroelectronics
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Transformer Type:
Width:
BALF-112X-01D3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Label 17/Jan/2019
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Taiwan Semiconductor
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
1552200253
Molex
WIRE AND CABLE;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
WB1010-SMLD
Coilcraft
Coilcraft's WB1010-SMLD RF Transformer offers 780uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.005GHz to 100MHz. Ideal for surface mount applications in RF circuits requiring precise signal transformation and filtering capabilities.
BALFHB-WL-05D3
STMicroelectronics
BALFHB-WL-05D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.4 dB. It operates b/w -40 °C and 105 °C, covering frequencies from 862 MHz to 928 MHz, making it ideal for wireless communication applications. Its compact size (2.15mm x 1.88mm x 0.68mm) ensures easy integration into various devices.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
JA4220-ALC
JA4220-ALC by Coilcraft is an RF Transformer with 300V isolation voltage, 0.2dB insertion loss, and 0.25A output current. Ideal for signal applications, it operates b/w -40 to 85°C with a frequency range of 100kHz to 3.5GHz. This surface mount transformer has dimensions of L3.81xB3.81xH3.05mm and features tin/silver/copper terminal finish in TR packing method.
TT1-6-KK81+
Mini-circuits
The Mini-circuits TT1-6-KK81+ RF Transformer has a power rating of 0.25W and insertion loss of 3dB. With dimensions L7.62xB6.86xH5.84 (mm), it is ideal for matching applications in the frequency range from 4KHz to 300MHz, with a max operating temperature of 85°C.
PWB-2-BLC
Coilcraft's PWB-2-BLC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.35dB insertion loss. Ideal for signal applications with inductance of 75uH, it operates b/w -40 to 85°C and has a max cutoff frequency of 400MHz. This surface mount transformer is compact at L6.48xB7.2xH4.45mm, making it suitable for various RF signal processing tasks.
TCM1-63AX+
TCM1-63AX+ by Mini-circuits is a RF transformer with a power rating of 0.2W and insertion loss of 2.5dB. It is commonly used in signal applications, with a max operating temperature of 85°C and min cutoff frequency of 10GHz.
2450BM15A0002E
Johanson Technology
2450BM15A0002E by Johanson Technology is an RF Transformer with 1.7 dB Insertion Loss, operating b/w -40 to 125°C. With dimensions of L2.01xB1.24xH0.71 mm, it has a frequency range from 2400 GHz to 2500 MHz, suitable for surface mount applications in RF circuits.
SWB2010-SMLD
Coilcraft SWB2010-SMLD RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits for high-frequency signal transformation.
BALFHB-WL-06D3
STMicroelectronics' BALFHB-WL-06D3 RF Transformer features 0.85 dB insertion loss, 862 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a temperature range of -40 to 105 °C.
HHM1711Q1
TDK
TDK's HHM1711Q1 RF Transformer features 1 dB insertion loss, 2300 GHz min cutoff frequency, and 3800 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with operating temperatures ranging from -40 to 85°C.
WB2010-SMLD
WB2010-SMLD by Coilcraft is a RF transformer with an inductance of 780 uH. It has dimensions of L8.26XB7.24XH5.72 (mm) and can operate at temperatures ranging from -40 to 85 °C. This surface mount transformer is commonly used in RF applications with a cutoff frequency range of 0.005 GHz to 100 MHz.
BD2425NNRF
Ttm Technologies
BD2425NNRF by Ttm Technologies is a RF Transformer with 1.25 dB Insertion Loss, 2400 GHz Min Cutoff Frequency, and 2525 MHz Max Cutoff Frequency. Ideal for surface mount applications in RF circuits due to its compact dimensions of 1.05mm x 1.05mm x 0.57mm and NICKEL GOLD terminal finish.
WB4-1HSLD
The Coilcraft WB4-1HSLD RF Transformer features 25uH primary inductance, 0.5dB insertion loss, and a frequency range from 0.1GHz to 500MHz. Ideal for surface mount applications in RF circuits, this transformer operates b/w -40°C to 85°C with matte tin terminal finish.
Z9314-ALD
Coilcraft's Z9314-ALD RF Transformer features 1.1 dB insertion loss, 4.5 uH primary inductance, and operates b/w -40 to 85 °C. Ideal for applications requiring a min cutoff frequency of 0.35 GHz up to a max of 1700 MHz, this surface mount transformer is packed in TR, EMBOSSED PLASTIC, measuring L6.35xB6.1xH4.83 mm.
WB1010-1-SMLD
Coilcraft's WB1010-1-SMLD RF Transformer offers 95uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.04GHz to 175MHz. Ideal for surface mount applications in RF circuits requiring precise impedance matching and signal isolation.
HHM1595A1
The TDK HHM1595A1 RF Transformer features 1.5 dB insertion loss, operates b/w -40°C to 85°C, with dimensions of L2.0xB1.25xH0.95 (mm). Ideal for surface mount applications, it has a frequency range from 3 GHz to 8 GHz making it suitable for various RF circuit designs.
TTWB-16-BLB
Coilcraft's TTWB-16-BLB RF Transformer offers 400V isolation voltage, 0.3dB insertion loss, and 75uH inductance. Ideal for POWER applications, this surface mount transformer operates b/w -40 to 85°C with a frequency range of 75kHz to 90MHz.
WBC2-1TLB
Coilcraft's WBC2-1TLB RF Transformer offers low 0.5 dB insertion loss, 10 uH primary inductance, and a wide frequency range from 0.2 GHz to 500 MHz. Ideal for surface mount applications in RF circuits, this transformer operates b/w -40°C to 85°C with compact dimensions of L4.45xB4.19xH3.05 mm.
CX2041NL
Pulse Electronics
CX2041NL by Pulse Electronics is a RF Transformer with 0.25W power rating, 0.6dB insertion loss, and 450MHz max cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has a turns ratio of 1:1CT.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-SPI2-01D3
STMicroelectronics' BALF-SPI2-01D3 RF Transformer has 2.1 dB insertion loss, operates b/w -40 to 105°C, with a cutoff frequency range of 860-930 MHz. Ideal for surface mount applications in RF circuits for various wireless communication devices.
BALF-SPI-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.45 mm; Length: 2 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: 779 GHz;
BALF-SPI2-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 105 Cel; Packing Method: TR; JESD-609 Code: e1;
BALF-SPI-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 1.45 mm; Insertion Loss: -3.2 dB;
BALF-NRF01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1 mm; Minimum Cutoff Frequency: 2400 GHz; Length: 1.5 mm; Height: .63 mm;
BALF-NRF01J5
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Length: 1.375 mm; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFHB-WL-04D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .68 mm; Additional Features: HEIGHT DIM INCLUDE TERMINAL ALSO; Insertion Loss: 1.5 dB; Packing Method: TR;
BALF-NRG-02J5
RF TRANSFORMER;
BALF-NRF01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .48 mm; Maximum Cutoff Frequency: 2540 MHz; Maximum Operating Temperature: 105 Cel; Insertion Loss: 2.7 dB;
BALFHB-WL-03D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Length: 2.15 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 928 MHz;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.4 dB; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 928 MHz; Length: 2.15 mm;
BALF-CC26-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel; Length: 1.485 mm; Maximum Operating Temperature: 105 Cel;
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFLB-WL-07D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 2.15 mm; Maximum Cutoff Frequency: 510 MHz; Minimum Operating Temperature: -40 Cel; Insertion Loss: 2.15 dB;
BALFHB-WL-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Minimum Cutoff Frequency: 862 GHz; Minimum Operating Temperature: -40 Cel; Width: 1.88 mm;
BALFLB-WL-08D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Insertion Loss: 2.2 dB; Maximum Cutoff Frequency: 510 MHz; Minimum Cutoff Frequency: 470 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved