Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BALFLB-WL-07D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of 2.15 dB and operates b/w -40 °C to 105 °C. It features a min cutoff frequency of 470 GHz and max cutoff at 510 MHz, ideal for high-frequency applications. Compact dimensions (2.15mm x 1.88mm x 0.68mm) make it suitable for space-constrained designs.
Median Price
$0.388
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.480
100+ parts
$0.399
1k+ parts
$0.361
10k+ parts
$0.302
Mouser Electronics
$0.356
$0.301
Newark
$0.533
$0.452
$0.397
-
Farnell
$0.550
$0.266
Element14
$1.010
$0.630
Verical
$0.385
$0.316
Rochester
$0.342
$0.284
$0.253
Future Electronics
$0.199
Avnet
Arrow
$0.152
Chip1Stop
$0.241
RS (Exports)
$0.314
Vyrian
Digiode
$0.522
Anansix
Corphita
$0.495
Continental Prestige Electronics
$1.070
Northwest PG Solutions
Eastek
$0.340
GreenTree Electronics
Native Components
Low insertion loss indicates better signal integrity, making it ideal for high-performance RF applications.
Tape and reel packing allows for efficient automated assembly and easy handling, perfect for large-scale manufacturing.
The high temperature rating ensures reliability in demanding environments, increasing product lifespan.
Capability to operate at very high frequencies makes it suitable for advanced RF communications and radar systems.
Wide operating temperature range ensures functionality in extreme conditions, enhancing its versatility.
Compact height allows for integration in space-constrained designs, suitable for modern miniaturized electronics.
Narrow width supports flexible use in various circuit designs while optimizing PCB space.
This allows for effective signal processing within a specific frequency range, making it ideal for various RF applications.
Designed specifically for RF applications, this transformer is engineered to provide efficient and reliable performance.
Surface mount technology facilitates automated assembly and allows for higher packing density on PCBs.
Short length contributes to overall compactness, making it suitable for space-sensitive applications.
RF Transformers BALFLB-WL-07D3 attributes and parameters. Explore more RF Transformers devices from STMicroelectronics
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Transformer Type:
Width:
BALFLB-WL-07D3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Diodes Incorporated
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SWB1010-SMLB
Coilcraft
Coilcraft's SWB1010-SMLB RF Transformer offers inductance of 780uH, max cutoff freq of 100MHz, and min cutoff freq of 0.005GHz. Ideal for RF applications with surface mounting feature. Operating temp range -40 to 85°C makes it versatile for various electronic designs.
TC1-1-13M-75+
Mini-circuits
Mini-circuits TC1-1-13M-75+ RF Transformer has 3 dB insertion loss, operates from -40 to 85°C, with cutoff frequencies of 4.5 GHz to 3 GHz. Ideal for surface mount applications in RF circuits.
TC1-1TG2+
Mini-circuits TC1-1TG2+ RF Transformer has 0.25W power rating, 3dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 400KHz to 500MHz. Dimensions are L3.81xB3.81xH3.81mm, featuring gold over nickel terminal finish and surface mounting feature.
PWB3010LC
PWB3010LC by Coilcraft is a RF Transformer with 0.25W power rating, 780uH inductance, and 0.2dB insertion loss. Ideal for SIGNAL applications, it operates b/w -40 to 85°C temperatures with a max cutoff frequency of 125MHz.
WB4-6TSLD
The Coilcraft WB4-6TSLD RF Transformer features 0.5 dB insertion loss, 43 uH primary inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 0.05 GHz up to a max of 200 MHz, this surface mount transformer is designed for high-frequency signal processing in compact electronic devices.
ATB3225-75034CT
TDK
The TDK ATB3225-75034CT RF Transformer has 2dB insertion loss, operates b/w -25°C to 85°C, with a cutoff frequency range of 1GHz to 100MHz. Ideal for surface mount applications in RF circuits due to its compact size and high-frequency capabilities.
ADT2-1T-1P+
Mini-circuits' ADT2-1T-1P+ RF Transformer has 1W power rating, 3dB insertion loss, and 30mA DC unbalance current. Ideal for matching applications with a frequency range from 8KHz to 600MHz. Dimensions: L7.87xB5.59xH2.84mm, surface mountable with tin over nickel finish for high-temp environments up to 85°C.
TC1-1-43X+
Mini-circuits TC1-1-43X+ RF Transformer features 2 dB insertion loss, 650 GHz min cutoff frequency, and 4000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of L3.81xB3.81xH4.06 mm.
MABAES0060
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: GOLD OVER NICKEL; Width: 3.81 mm; Additional Features: IMPEDANCE RATIO IS 1:1; Minimum Cutoff Frequency: .3 GHz;
HFB050100
Pulse Specialty Components
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: HFB050100; Packing Method: BULK; Height: 22.86 mm; Minimum Operating Temperature: 0 Cel;
ADT4-1T-2
Mini-circuits' ADT4-1T-2 RF Transformer features 3 dB insertion loss, 0.2 GHz min cutoff frequency, and 100 °C max operating temp. Ideal for surface mount applications in RF circuits with a freq range of 0.2 GHz to 350 MHz.
0900BL15C050E
Johanson Technology
Johanson Technology's 0900BL15C050E RF Transformer offers low insertion loss of 1.2 dB, operating temperature range from -40 to 85°C, and cutoff frequency ranging from 800 MHz to 1000 GHz. Ideal for surface mount applications in RF circuits for efficient signal transformation.
2450BM15A0015E
Johanson Technology's 2450BM15A0015E RF Transformer features 1.5 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of L2.0xB1.25xH0.8 (mm).
TC1-1-13MA+
Mini-circuits TC1-1-13MA+ RF Transformer has 50Ω impedance, 3dB insertion loss, and 0.25W power rating. Ideal for signal applications with a frequency range from 4.5GHz to 3MHz. Features surface mounting and matte tin finish with nickel barrier.
CX2078NL
Pulse Electronics
CX2078NL by Pulse Electronics is a RF Transformer with 0.6 dB Insertion Loss, 5 GHz Min Cutoff Freq, and 500 MHz Max Cutoff Freq. Ideal for applications requiring Surface Mounting, it has dimensions of L4.3xB2.69xH3.0 mm and operates b/w -40 to 85°C temperatures.
1720BL15B0050E
1720BL15B0050E by Johanson Technology is an RF Transformer with 1.5 dB Insertion Loss, operating b/w -40 to 85°C. With a min cutoff frequency of 625 GHz and max of 2815 MHz, it's ideal for surface mount applications in high-frequency circuits.
TT1-6-KK81
The Mini-circuits TT1-6-KK81 RF Transformer features 3 dB insertion loss, 0.004 GHz min cutoff frequency, and 300 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a turns ratio of 1:1.
Inrcore
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; Height: 22.86 mm; Insertion Loss: -2 dB;
BALF-112X-01D3
STMicroelectronics
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-SPI2-01D3
STMicroelectronics' BALF-SPI2-01D3 RF Transformer has 2.1 dB insertion loss, operates b/w -40 to 105°C, with a cutoff frequency range of 860-930 MHz. Ideal for surface mount applications in RF circuits for various wireless communication devices.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
BALF-SPI-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.45 mm; Length: 2 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: 779 GHz;
BALF-SPI2-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 105 Cel; Packing Method: TR; JESD-609 Code: e1;
BALF-SPI-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 1.45 mm; Insertion Loss: -3.2 dB;
BALF-NRF01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1 mm; Minimum Cutoff Frequency: 2400 GHz; Length: 1.5 mm; Height: .63 mm;
BALF-NRF01J5
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Length: 1.375 mm; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFHB-WL-04D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .68 mm; Additional Features: HEIGHT DIM INCLUDE TERMINAL ALSO; Insertion Loss: 1.5 dB; Packing Method: TR;
BALF-NRG-02J5
RF TRANSFORMER;
BALF-NRF01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .48 mm; Maximum Cutoff Frequency: 2540 MHz; Maximum Operating Temperature: 105 Cel; Insertion Loss: 2.7 dB;
BALFHB-WL-03D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Length: 2.15 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 928 MHz;
BALFHB-WL-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.4 dB; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 928 MHz; Length: 2.15 mm;
BALF-CC26-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel; Length: 1.485 mm; Maximum Operating Temperature: 105 Cel;
BALFHB-WL-06D3
STMicroelectronics' BALFHB-WL-06D3 RF Transformer features 0.85 dB insertion loss, 862 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a temperature range of -40 to 105 °C.
BALFHB-WL-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Minimum Cutoff Frequency: 862 GHz; Minimum Operating Temperature: -40 Cel; Width: 1.88 mm;
BALFLB-WL-08D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Insertion Loss: 2.2 dB; Maximum Cutoff Frequency: 510 MHz; Minimum Cutoff Frequency: 470 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved