Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.7 mm; Dimensions: L3.81XB2.79XH3.8 (mm); Maximum Operating Temperature: 85 Cel; Length: 3.81 mm;
Median Price
$1.730
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.600
100+ parts
$1.890
1k+ parts
-
10k+ parts
$1.530
DigiKey
$4.120
$1.882
Verical
$1.550
Chip1Stop
Richardson RFPD
$1.340
Voyager Components
$1.802
Nova Conductors
$2.175
Bristol Electronics
$2.736
$1.696
$0.903
Chip Stock
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Martec Srl
Cyclops Electronics Ltd
Cogito LLC
Prism Electronics
Continental Prestige Electronics
$2.131
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$6.272
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Futuretech Components
Infinite Electronics LLP (Excess)
GreenTree Electronics
Kepictronics
RF Transformers MABAES0061 attributes and parameters. Explore more RF Transformers devices from M/a-com Technology Solutions
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Transformer Type:
Width:
MABAES0061 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
MACOM designs and manufactures high-performance semiconductor products for the Telecommunications, Industrial and Defense and Datacenter industries. MACOM services over 6,000 customers annually with a broad product portfolio that incorporates RF, Microwave, Analog and Mixed Signal and Optical semiconductor technologies. MACOM has achieved certification to the IATF16949 automotive standard, the ISO9001 international quality standard and the ISO14001 environmental management standard. MACOM has more than 70 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operates facilities throughout the United States, Europe, and Asia.
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Vishay Intertechnology
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
MABA-010247-2R1250
M/a-com Technology Solutions
MABA-010247-2R1250 by M/a-com: RF Transformer with 4dB Insertion Loss, 1GHz Min Cutoff Freq, and 1600MHz Max Cutoff Freq. Ideal for surface mount applications in RF circuits due to compact L4.21xB4.21xH2.7mm dimensions and operating temp range of -40°C to 85°C.
MABA-007159-000000
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 4.5 GHz; Dimensions: L3.81XB3.81XH2.79 (mm); Length: 3.81 mm; Width: 2.79 mm;
PWB3010LC
Coilcraft
PWB3010LC by Coilcraft is a RF Transformer with 0.25W power rating, 780uH inductance, and 0.2dB insertion loss. Ideal for SIGNAL applications, it operates b/w -40 to 85°C temperatures with a max cutoff frequency of 125MHz.
HHM1564A4
TDK
TDK's HHM1564A4 RF Transformer has 1 dB insertion loss, operates b/w -40 to 85°C, with cutoff frequencies ranging from 824 MHz to 894 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L2.0xB1.25xH0.95 (mm).
HHM1523C1
The TDK HHM1523C1 RF Transformer features low insertion loss of 1.1 dB, with dimensions L2.0xB1.25xH0.95 (mm). Ideal for applications requiring a min cutoff frequency of 880 GHz and max operating temperature of 85°C, this surface mount transformer operates in the frequency range up to 960 MHz.
ADT2-1T+
Mini-circuits
The Mini-circuits ADT2-1T+ is a RF transformer with a power rating of 0.25W and insertion loss of 3dB. It is used for matching applications, with a min cutoff frequency of 400KHz and max operating temperature of 85°C.
BALFHB-WL-05D3
BALFHB-WL-05D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.4 dB. It operates b/w -40 °C and 105 °C, covering frequencies from 862 MHz to 928 MHz, making it ideal for wireless communication applications. Its compact size (2.15mm x 1.88mm x 0.68mm) ensures easy integration into various devices.
ETC1-1-13
ETC1-1-13 RF Transformer by Tyco Electronics M/a-com features 3.5 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C and comes in tape & reel packaging.
TCM2-33WX+
Mini-circuits TCM2-33WX+ RF Transformer has 3dB Insertion Loss, 10GHz Min Cutoff Freq, and 3000MHz Max Cutoff Freq. Ideal for RF applications with Surface mounting feature, operating b/w -40°C to 85°C.
LDB212G4020C-001
Murata Manufacturing
Murata Manufacturing's LDB212G4020C-001 RF Transformer has impedance of 50Ω primary and 100Ω secondary, with insertion loss of 1.05 dB. It is a surface mount transformer for signal applications, operating b/w -40°C to 85°C, with cutoff frequency ranging from 2.3 GHz to 2.5 GHz.
ATB2012-50011-T000
ATB2012-50011-T000 by TDK is an RF Transformer with 2.5 dB Insertion Loss, 40 GHz Min Cutoff Frequency, and -40 to 85 °C Operating Temperature range. Ideal for applications requiring high-frequency signal transformation in compact electronic devices due to its small dimensions and surface mounting feature.
PA0907NL
Pulse Electronics
PA0907NL by Pulse Electronics is a RF Transformer with inductance of 660uH, operating temperature range from -40 to 125 °C. It has dimensions of L29.46xB25.4xH10.2 mm and cutoff frequency ranging from 0.2 GHz to 0.7 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high performance capabilities.
BALF-SPI-02D3
STMicroelectronics' BALF-SPI-02D3 RF Transformer has -3.2 dB Insertion Loss, 434 MHz Max Cutoff Frequency, and operates b/w -40 to 85°C. Ideal for surface mount applications in RF circuits due to its compact size of 2.05mm x 1.45mm x 0.71mm.
ADT2-1T-1P+
Mini-circuits' ADT2-1T-1P+ RF Transformer has 1W power rating, 3dB insertion loss, and 30mA DC unbalance current. Ideal for matching applications with a frequency range from 8KHz to 600MHz. Dimensions: L7.87xB5.59xH2.84mm, surface mountable with tin over nickel finish for high-temp environments up to 85°C.
MABACT0048
MABACT0048 by M/a-com Technology Solutions is an RF Transformer with 0.9 dB Insertion Loss, 5 GHz Min Cutoff Freq, and 200 MHz Max Cutoff Freq. Ideal for applications requiring Surface Mount Transformers in RF circuits operating b/w -40°C to 85°C temperature range.
PCT-77
Stancor Products
Stancor Products' PCT-77 RF Transformer has a max operating temp of 105°C, cutoff freq range from 0.0003 GHz to 0.1 MHz, and 1:1 turns ratio. Ideal for through-hole mounting in RF applications due to its compact size (11.81mm x 7.874mm x 10.414mm).
B0310J50100AHF
Anaren
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.29 mm; Packing Method: TAPE & REEL; Maximum Cutoff Frequency: 1000 MHz; Maximum Operating Temperature: 85 Cel;
TTWB-16-BLB
Coilcraft's TTWB-16-BLB RF Transformer offers 400V isolation voltage, 0.3dB insertion loss, and 75uH inductance. Ideal for POWER applications, this surface mount transformer operates b/w -40 to 85°C with a frequency range of 75kHz to 90MHz.
TC4-1TG2+
Mini-circuits TC4-1TG2+ RF Transformer has 2 dB insertion loss, 30 mA max DC unbalance current, and operates from 500 KHz to 300 MHz. Ideal for signal applications with surface mounting feature.
TCM1-63AX+
TCM1-63AX+ by Mini-circuits is a RF transformer with a power rating of 0.2W and insertion loss of 2.5dB. It is commonly used in signal applications, with a max operating temperature of 85°C and min cutoff frequency of 10GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Maximum Operating Frequency: 3000000 KHz; No. of Winding (Secondary): 1; Minimum Operating Frequency: 4500 KHz;
TE Connectivity
TE Connectivity's MABA-007159-000000 RF Transformer features 3.5 dB Insertion Loss, 4.5 GHz Min Cutoff Freq, and 3000 MHz Max Cutoff Freq. Ideal for applications requiring high-frequency signal transformation in compact spaces with surface mounting feature.
MABACT0059
TE Connectivity's MABACT0059 RF Transformer offers 8.4 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of 3.81mm x 3.81mm x 2.72mm and operating temperatures ranging from -40°C to 85°C.
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width: 2.79 mm; Maximum Cutoff Frequency: 3000 MHz; Height: 2.72 mm;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: MABACT0059; Length: 3.81 mm; Packing Method: TR; Maximum Operating Temperature: 85 Cel;
MABAES0060
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: E; Terminal Finish: Matte Tin (Sn); Dimensions: 3.81mm X 3.81mm X 3.8mm; Insertion Loss: 1.5 dB;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: GOLD OVER NICKEL; Width: 3.81 mm; Additional Features: IMPEDANCE RATIO IS 1:1; Minimum Cutoff Frequency: .3 GHz;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 4.21 mm; Minimum Cutoff Frequency: 1 GHz; Maximum Cutoff Frequency: 1600 MHz; Maximum Operating Temperature: 85 Cel;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 4.21 mm; Minimum Cutoff Frequency: 5 GHz; Width: 4.21 mm;
MABA-010125-TC1113
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L3.81XB3.81XH2.8 (mm); Application: SIGNAL; Height: 2.8 mm; Minimum Cutoff Frequency: 4.5 GHz;
MABAES0061
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: MABAES0061; Length: 3.81 mm; Minimum Operating Temperature: -40 Cel; Height: 3.8 mm;
MABACT0065
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Cutoff Frequency: 3000 MHz; Length: 3.81 mm; Minimum Operating Temperature: -40 Cel; Height: 3.3 mm;
MABA-011020
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 3.81 mm; Minimum Cutoff Frequency: 1 GHz; Maximum Operating Temperature: 85 Cel; Packing Method: TR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved